Stock #
10755160
Used PTI Pelletizing Line, Model TS4500, 4.5" Diameter. 30:1 L/D Extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42? center-line height. The gearbox is a Flender model SZNE250 having a reduction ratio of 13.88:1 and has a service rating of 200 HP and a catalogue rating of 325 HP. The gearbox is belt driven in a wraparound manner by a 200 HP D/C motor with Safetronics SCR control. Over-sized on center oblong feed throat with water cooling. Free-standing temperature control panel has ten (10) zones of temperature controls. SCR is mounted inside the control panel. 480/3/60 400 amps. S/N 1832. Mounted on the extruder discharge is a model HSC-45 hydraulic slide plate screen changer having two (2) nominal 4.5" diameter breaker plates with oversized 5 HP hydraulic power pack. S/N H45-204. Downstream is a PTI model CPF1000S water ring pelletizing system with 3 HP cutter head, die, sluiceway, water system, Gala model 8.1BF spin dryer and control panel. S/N 2780. 460/3/60 30 amps.
Used Equipment Facts About This Machine
Manufacturer Information:
- Manufacturer: PTI
- Model: TS4500 (Pelletizing Line)
- Condition: Used
- Serial Number (Extruder): 1832
- Serial Number (Pelletizing System): 2780
Description:
The PTI TS4500 Pelletizing Line is a high-performance, industrial extrusion and pelletizing system, designed for polymer processing, compounding, and recycling applications. Featuring a 4.5" diameter, 30:1 L/D extruder, this system ensures efficient material processing with superior temperature control and venting capabilities.
The electrically heated, water-cooled (closed loop), side-vented barrel operates at a nominal 42” centerline height, providing stable extrusion conditions and optimized melt flow. The extruder’s gearbox is a Flender SZNE250, with a 13.88:1 reduction ratio, offering a 200 HP service rating and a 325 HP catalog rating. The belt-driven gearbox is powered by a 200 HP DC motor, controlled via a Safetronics SCR drive, ensuring precise speed and torque control.
The over-sized, on-center oblong feed throat includes water cooling, allowing for enhanced material flow and temperature consistency. A free-standing temperature control panel provides ten (10) zones of temperature control, with the SCR system integrated into the control panel.
Mounted on the extruder discharge is an HSC-45 hydraulic slide plate screen changer, featuring two 4.5" diameter breaker plates and an oversized 5 HP hydraulic power pack (S/N H45-204) for efficient filtration and material purity.
Downstream Pelletizing System:
The PTI CPF1000S water ring pelletizing system includes:
- 3 HP cutter head
- Pelletizing die
- Sluiceway water system
- Gala 8.1BF spin dryer with control panel
This high-efficiency pelletizing line is built for continuous, high-throughput operation, making it an ideal choice for polymer extrusion, recycling, and compounding applications.
Specifications:
Extruder System:
- Screw Diameter: 4.5 inches
- L/D Ratio: 30:1
- Barrel Features:
- Electrically heated, water-cooled (closed loop)
- Side vented for improved gas removal
- Nominal 42" centerline height
- Gearbox:
- Flender SZNE250 model
- Reduction Ratio: 13.88:1
- Service Rating: 200 HP
- Catalog Rating: 325 HP
- Drive System:
- 200 HP DC motor
- Safetronics SCR Control
- Feed Throat: Over-sized, on-center oblong design with water cooling
- Temperature Control:
- Free-standing control panel with 10 temperature zones
- SCR system mounted inside the control panel
- Power Requirements: 480V / 3-Phase / 60Hz / 400 Amps
Screen Changer:
- Model: HSC-45 Hydraulic Slide Plate Screen Changer
- Breaker Plates: (2) 4.5" Diameter Plates
- Hydraulic Power Pack: 5 HP
- Serial Number: H45-204
Pelletizing System:
- Model: PTI CPF1000S Water Ring Pelletizer
- Motor: 3 HP Cutter Head
- Additional Components:
- Pelletizing die
- Sluiceway water system
- Gala 8.1BF Spin Dryer with control panel
- Power Requirements: 460V / 3-Phase / 60Hz / 30 Amps
Applications:
- Plastics & Polymer Processing: Pelletizing for thermoplastics and engineered materials
- Recycling & Reprocessing: Turning scrap plastic into reusable pellets
- Industrial Compounding: Masterbatch production and polymer blending
- Chemical & Specialty Material Processing: High-volume polymer extrusion
Common Product Uses:
- High-output extrusion for polymer compounding and recycling
- Temperature-controlled processing with closed-loop water cooling
- Hydraulic screen changing for efficient filtration
- Automated pelletizing with water ring cooling and drying
Common Keywords for this Used Machine Type
Extrusion Blow Molding, Plastic, Plastic blown film, Plastic film, Plastic Granules, Plastic Pellets, Plastic Sheet, Plastics, Plastics / Pellets, Plastics Blow Molding, Plastics Equipment
