Buy Pre-Owned Axon EZ-200 HS Automatic Sleeve Applicator — Conveyor and Timing Screw Included

DOWNLOAD ALL PHOTOS FOR THIS ITEM WITHOUT AARON WATERMARK

SELL US YOURS

Stock # 70120007

Used Axon Model EZ-200 HS Automatic Shrink Sleeve / Neck Band Applicator with timing screw feed and table top conveyor. This unit can apply printed and unprinted PVC, PETG, OPS, PLA neck bans, sleeves and labels. It can run at speeds from 30 to 120 containers per minute depending on materials, containers and configuration. Container diameter range: 35-124 mm. Sleeve lay flat range: 55-205 mm. Film thickness: 40-70 microns (1.5-3.0 mil) Touch pad controls. 220 vac 1 ph electric power and 80 psi air required. Shrink tunnel not included.

SPECIFICATIONS

Manufacturer	AxonAxon
Model	EZ-200 HS
Serial #	E-080823B
Category	Packaging EquipmentPackaging Equipment
Subcategory	Labelers Sleeve - Shrink SleeveLabelers Sleeve - Shrink Sleeve
Band Size Range: Diameter	35-124 mm
Make	Axon
Model Number	EZ-200 HS
Serial #	E-080823B
Speed	30-120
Shrink Tunnel	No

Used Equipment Facts About This Machine

🏭 Manufacturer Information

Manufacturer: Axon, a division of ProMach
Location: Raleigh, North Carolina, USA
Specialization: Axon specializes in shrink sleeve applicators, tamper-evident banding machines, and heat tunnels, offering robust, easy-to-operate machines with innovative touchpad and PLC control systems.

📋 Description

The Used Axon Model EZ-200 HS Automatic Shrink Sleeve/Neck Band Applicator is a flexible solution for applying both printed and unprinted shrink materials including PVC, PETG, OPS, and PLA.
This unit features a tabletop conveyor and timing screw feed system to ensure accurate container spacing and sleeve placement.
Capable of running at speeds of 30 to 120 containers per minute, the EZ-200 HS accommodates container diameters from 35mm to 124mm, with a sleeve lay flat range of 55mm to 205mm, and supports film thicknesses from 40-70 microns (1.5-3.0 mil).
It uses touch pad controls for user-friendly operation and runs on 220 VAC single-phase electrical power along with 80 PSI air pressure.

⚡ Note: Shrink tunnel is not included with this unit.

⚙️ Specifications

Shrink Sleeve / Neck Band Applicator (Axon EZ-200 HS)

Model: EZ-200 HS
Speed Range: 30 to 120 containers per minute (depending on material, configuration)
Container Diameter Range: 35mm to 124mm
Sleeve Lay Flat Range: 55mm to 205mm
Film Thickness Supported: 40-70 microns (1.5-3.0 mil)
Compatible Sleeve Materials: PVC, PETG, OPS, PLA
Controls: Touch pad control panel
Conveyor Type: Tabletop belt conveyor
Feed System: Timing screw feed
Electrical Requirements: 220 VAC, single phase
Air Requirements: 80 PSI compressed air
Shrink Tunnel: Not included

🛠️ Applications

Beverage Bottling (e.g., energy drinks, flavored waters)
Pharmaceutical Packaging (e.g., tamper-evident neck bands)
Cosmetics and Personal Care (e.g., lotions, sprays)
Nutraceuticals and Supplements (e.g., vitamin bottles)
Food Products (e.g., sauces, dressings)
Household Products (e.g., cleaning sprays, chemicals)

📦 What Products Would This Be Used For

Energy drink bottles
Juice and flavored water bottles
Vitamin and supplement bottles
Shampoo and conditioner bottles
Lotion containers
Pharmaceutical bottles with tamper evident bands
Sauce and condiment bottles
Cleaning chemical bottles
Personal care spray bottles
Cosmetic product containers

PRODUCT DETAILS

axon ez-200 hs
shrink sleeve applicator
neck band labeler
tabletop conveyor labeler
used shrink labeler
pvc sleeve applicator
petg sleeve applicator
ops sleeve applicator
shrink sleeve bander
printed shrink labeler
used axon ez-200 hs shrink sleeve applicator
shrink sleeve applicator with timing screw feed
shrink sleeve applicator without shrink tunnel
neck band applicator used
shrink sleeve machine with touchpad control
tabletop conveyor shrink labeler
used pvc shrink sleeve applicator
buy petg shrink sleeve applicator
shrink label applicator for 35-124mm containers
axon shrink sleeve equipment for sale
buy used axon ez-200 hs shrink sleeve applicator
used shrink sleeve labeler with tabletop conveyor
shrink sleeve and neck band applicator for small containers
shrink sleeve applicator for bottles 35mm to 124mm
used shrink labeler for pvc petg ops pla films
shrink sleeve machine with 80 psi air requirement
shrink sleeve applicator without tunnel included
industrial neck band shrink sleeve applicator
shrink label applicator with timing screw feed system
pre-owned axon shrink labeler for beverage bottles
buy used shrink sleeve labeler
shrink sleeve applicator
neck band applicator
axon ez-200 hs for sale
tabletop shrink labeler
used shrink bander
shrink sleeve labeling machine
sleeve label applicator
petg shrink sleeve machine
ops shrink sleeve applicator
buy axon shrink sleeve labeler
sell used axon ez-200 hs
tabletop shrink sleeve applicator
used shrink label machine
where to buy shrink sleeve applicator
find used neck band applicator
shrink labeler for sale no tunnel
buy shrink sleeve labeling machine
sell used tabletop shrink labeler
shrink sleeve applicator with touch pad

Standard Terms and Conditions

FINANCING AVAILABLE

MORE INFO

APPLY NOW

We offer a variety of finance programs. Contact your sales person or Fred Fial direct for more information on our finance services available.

Fredric S. Fial, CLFP
Ascentium Capital
Work: 281.921.3883
Cell: 602.524.2196

"Dealing with Aaron is an easy and enjoyable process"

"Aaron Equipment is always my first call for used process equipment. Their inventory and customer service has ensured successful project results every time. Thanks y’all!"

"I have purchased all different types of equipment from Aaron Equipment over the last 10 years and have always been 100% happy with not only the equipment but with their customer service!"

"Working with Aaron Equipment Company was as easy as it gets."

"It is a pleasure to work with AEK and I would recommend them as an equipment supplier."

"The partnership we enjoy with Aaron has helped our business to be what it is today – thank you guys!”

"I will definitely use Aaron Equipment in the future."

"Aaron’s customer service indicates that they want long term partnerships and that is something we especially appreciate."

"I really value shopping for used equipment from Aaron Equipment Company because the information they present is accurate, their prices fair and their customer service is the best…Highly recommend."

"This is my first time using Aaron Equipment to purchase equipment. They were easy to work with and things were done quickly and efficiently. I will be a repeat customer when the need arises. This is a trustworthy company that delivers what they advertise."

"I have purchased multiple pieces of equipment through Aaron equipment over the past 15 years. The staff has been very knowledgeable on every request & have spent countless hours ensuring that the equipment I was purchasing met my expectations."

"I have been doing business with Aaron equipment for many years. This year I had the need for some used equipment in a new business Venture. I got in touch with Ryan Davies. I could not be happier with the response and honesty exhibited by him. Dealing with them was a pleasure and everything was as represented. Fair an Honest is how I would describe them."

“Aaron Equipment was very easy to get into contact with and get a price on a un-used chiller they were selling. The process was seamless and very easy on our end and we had the equipment much faster than going out for bid on it to multiple vendors and we able to come in under budget on the project.”

DESCRIPTION