Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder – 300 HP, 30:1 L/D, Reconditioned in 2025

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder 300 HP, 30:1 L/D, Reconditioned in 2025. Features a 30:1 L/D ratio with a PE/PP screw and a 17.21:1 gearbox ratio. Powered by a new 300 HP Westinghouse AC motor with a new WEG AC inverter drive. Equipped with a refurbished 10-zone control panel consisting of six barrel heating zones and four downstream zones, all fitted with new Eurotherm 3216 temperature controllers. Gearbox has been rebuilt with all internal bearings replaced except the thrust bearing. Serial No. F-9731, S.O. 901180. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Approximate overall dimensions are 242" L x 74" W x 102" H with an estimated weight of 23,000 lbs. Originally built in 1998, reconditioned in 2025.

MFR: Davis Standard

Used PTI 6000 6" Single Screw Extruder – 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox

Used PTI 6000 6" Single Screw Extruder 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox. Features a 30:1 L/D ratio with an air-cooled barrel, seven barrel heating zones, and sixteen downstream heating zones. Driven by a 400 HP WEG AC motor with WEG CFW-11 inverter drive and a Flender Model SZNF 390 gearbox featuring a 21.7:1 ratio and rated for up to 701 HP. Includes a 9" L x 7" W feed throat, 62" centerline height, 900-amp disconnect, and electrical requirements of 460 Volt, 3 Phase, 60 Hz (780 FLA). Mounted on V-groove casters for ease of positioning. Serial No. 3768. Approximate overall dimensions are 24' L x 100" W x 106" H with an estimated weight of 26,000 lbs. Built 2003.

MFR: PTI

Used Welex 6.0 30D 6" Single Screw Extruder – 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer

Used Welex 6.0 30D 6" Single Screw Extruder 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer. Featuring a 30:1 L/D ratio with an air-cooled, vented barrel (vent currently plugged) located approximately 120" from the center of the feed throat. Equipped with six barrel heating zones, nine die heating zones, Tempco Cool Touch heater bands, and a direct-driven Koellmann gearbox with an 8.7:1 ratio. Driven by a 500 HP Reliance AC motor rated for up to 200 screw RPM. Includes a 10" L x 8" W feed throat, 68" centerline height, and a 6" Dynisco hydraulic screen changer complete with hydraulic power unit. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Previously operated on PET resin. AC drive is not included. Approximate overall dimensions are 330" L x 84" W x 102" H with an estimated weight of 37,000 lbs.

MFR: Welex

Unused Inspire Canopy Series 6 Ton Rooftop Air Conditioner ISRTU1-I.100-15-6T – Commercial HVAC Unit (2023)

Unused- Inspire Canopy Series Air Conditioner, Model ISRTU1-I.100-15-6T. Rated 6 nominal tons. Built 2023

Used Huaxing Three-Stage 150mm (6") Extrusion Line – Model HXSJ 150-DWM11

Used- Huaxing Three-Stage 150mm (6") Extrusion Line, Model HXSJ 150-DWM11. 30:1 L/D. Rated 600-1,000 kg (approx 1323-2205 lbs.) per hour. Consisting of: (1) 150mm x 4500mm (30:1) primary extruder, double vented w/ vacuum system and 2-stage filtration, and (1) 150mm x 1800mm (12:1) secondary extruder, single vented with 2-stage filtration, Driven by a 215hp 1785 rpm motor. One Crusher/compactor with infeed conveyor. Water bath strand cooling system with dewatering blowers, strand cutter, vibrating table, cooling tank, cooling tower, recirculation pumps, discharge vacuums, storage cyclone. pneumatic storage cyclone discharge. Main control panel. 60/480V. Built 2019. Previously used for PP and PE Plastics.

Farrel Rubber/Plastic Laboratory Calender Mill – Inverted "L" 4-Roll, Adjustable Knives

Used- Farrel 4-Roll Inverted "L" Rubber/Plastic Laboratory Calendar Mill. 6" D x 13" L rolls. 500 degrees F max. roll temp. Up to 35 RPM. Fixed center roll w/ adjustable bottom, top, and offset. Full herringbone even speed gears on one side, Full herringbone friction gears on the other side. Nylon adjustable infeed guides. (2) adjustable twin knives on bottom roll. Cable safeties on both sides of frames. SCR drive w/ dynamic braking; Operators control station with variable speeds. Variable speed 7.5 HP motor. 3/460V. Serial# 73A1499.

MFR: Farrell

Used Buflovak Atmospheric Double Drum Dryer | Model 6" x 8" ADDD | Pilot & R&D D

Used Buflovak Atmospheric Double Drum Dryer, Model 6" x 8" ADDD. 2 sq/ft Total drying surface area. Approximate 6" diameter x 8" face cored drum, rated 140-160 psig. Driven by a 1/2hp, 3/60/208-230/460 volt, 1725rpm motor through reducer 41.58:1 ratio. Blador VS drive. The dryer features twin chrome-plated drying drums with independent drum gap adjustment, stainless steel frame and safety guards, product feed trough with feed manifold, and doctor blade assembly. Compact unit is designed for drying slurries, purees, pastes, and other pumpable materials into flakes or powders and is well suited for R&D, product development, and small-scale production. Mounted on stainless steel frame. Job No. P1-00972, Serial# 2013-04, built 2013.

MFR: Buflovak

Industrial Used Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying

Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air temperature 250 degrees F. Built 2017. Last ran wet coffee grounds.

MFR: Belt-O-Matic

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011, SN 4064, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

Used O’Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower

Used O'Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower, SN 4063, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

Groen Model DTA-3-60 SP Twin 60 Gallon Kettles

Used-Groen Model DTA-3-60 SP Twin 60 Gallon Kettles with Twin Pivoting Agitator. National Board stamped jackets rated 45 PSI @ 300 Deg F. Stainless steel common frame, rinse faucet. Elec: 3/60/230/460V.

MFR: Groen

Used Dusenbery 60” Slitter – Model 815 LR, Duplex Design, 3” Rewind Shafts

Used- Dusenbery 60" Slitter, Model 815 LR. Duplex design with 3" rewind shafts. 2 Motor design with (1) 15 hp GE DC motor and (1) 7.5 hp GE DC motor. Razor in groove slitting with six razor knife holders and six female grooved sections. Duplex rewind with 3" core shafts and set of lay on roll arms for each shaft with one lay on roll each. 65" Wide x 40" to 60" diameter unwind stand with 3" shaft. Fife guide design with disc brake clutch. Includes drive cabinet with drives and control panel. Serial # 54750.

MFR: Dusenberry Engr