Used Mueller 30,000 Gallon Stainless Steel Insulated Dairy Silo – Vertical Milk & Whey Storage Tank

Used Mueller 30,000-Gallon Vertical Stainless Steel Insulated Dairy Silo. Manufactured in 1996. Silo measures 140" internal diameter x 518 1/8" overall height, with approximately 146 1/2" outside diameter and 151 1/4" base outside diameter. Unit features a side bottom manway, agitator assembly, overflow/vent line, CIP supply line, and refrigeration connections. Previously used for whey. Possible applications and suitable products include dairy and food processing storage for whey and similar liquid products.

MFR: Mueller Corp

Used Anhydro Vertical Heat Exchanger / Reboiler – Hastelloy Tubes, 31.8 Sq Ft

Used- Anhydro Vertical Heat Exchanger / Reboiler, Approximate 31.8 Square Feet. Carbon steel shell rated 100psi / FV external at -20 to 600 degrees F. (31) 1" Diameter x 47" long Hastelloy C-276 tubes rated 15 psi internal / 100 psi external at -20 to 600 degrees F. 15,000 Btu/h. Openings: (2) 2", (2) 1". Side lug mounted. Certified by Orbit Industries, National Board# 1025, Serial# 8306-PV-2. No bottom head.

MFR: Anhydro

Industrial Vertical Heat Exchanger – Anhydro, 31.8 Sq Ft, No Bottom Head

Used- Anhydro Vertical Heat Exchanger / Reboiler, Approximate 31.8 Square Feet. Carbon steel shell rated 100psi / FV external at -20 to 600 degrees F. (31) 1" Diameter x 47" long Hastelloy C-276 tubes rated 15 psi internal / 100 psi external at -20 to 600 degrees F. 15,000 Btu/h. Openings: (2) 2", (2) 1". Side lug mounted. Certified by Orbit Industries, National Board# 1024, Serial# 8306-PV-1. No bottom head.

MFR: Anhydro

NEW- Paul O Abbe, Model RB-315 Ribbon Blender

NEW- Paul O. Abbe, Model RB-315 Ribbon Blender. 315 Cubic Foot working capacity. 356 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 65.4" wide x 141.8" long x 73.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 19,580 pounds. Approximate overall dimensions: 87.8" wide x 218.4" long x 100.4" high.Controls are available upon request.

MFR: Paul O Abbe

Used Paul O. Abbe RB-315 Ribbon Blender – 315 Cu Ft Stainless Steel Food Grade Industrial Mixer

Used Paul O. Abbe RB-315 Ribbon Blender 315 Cu Ft Stainless Steel Food Grade Industrial Mixer. 356 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 65.4" wide x 141.8" long x 73.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 19,580 pounds. Approximate overall dimensions: 87.8" wide x 218.4" long x 100.4" high.

MFR: Paul O Abbe

Cust-O-Fab U Tube 3150 sq ft Shell & Tube Heat Exchanger

Used- Cust-O-Fab U Tube Shell & Tube Heat Exchanger. Approximate 3150 Square Feet. Carbon steel shell rated 1715 psi at 25 to 610 Degrees F. (295) 1" diameter x 20' long SA-213-T11 Chromium-molybdenum steel tubes rated 2184 psi at 30 to 750 degrees F. 1-1/4" tube pitch. Two pass. Openings shell: (3) 8", tubes: 14", 12". Saddle mounted. Serial# 97-202. National Board# 4666. All openings are pipe stubs.

MFR: Cust-O-Fab

Ketema 32" x 20" Mark III Perforated Basket Centrifuge.

Used- Ketema 32" x 20" Mark III Perforated Basket Centrifuge. Stainless steel construction (product contact areas); Top load, bottom unload with hydraulic plow discharge; Max bowl speed 1325 rpm; Rated 96#/cu. ft. capacity, Unit is on 33.5" heavy duty leg extensions; Top cover is sealed and air tight, includes hinged access door; 20 HP hydraulic drive; 3 phase, 230/460 voltage; Includes set of stairs with platform for operator. Previous customer ran with a nitrogen blanket.

MFR: Ketema

Used Sandvik Belt Flaker Cooler/Dryer – 32” x 34’, Stainless Steel, 24’ Cooling Area

Used- Sandvik Belt Flaker Cooler/ Dryer. Approximately 32" wide x 34' long. 301 Stainless steel contact parts. 24' Of cooling area. 3HP chill roll drive. 3HP belt drive. Pinch rollers feed in system. Mounted on Casters. Job # 987870.

MFR: Sandvik

Used Vivtek PSD-P5 Pilot Spray Dryer – Food-Grade Powder Production System with Dust Collection (2023)

Used- Vivtek Instruments Pilot Spray Dryer, Model PSD-P5. 5-8 kg/hour (approx. 11-17.5 lbs./hour) evaporation capacity. 32" diameter x 60" long drying chamber. 6" diameter x 16" long cyclone. Two-fluid atomizer: 1, 1.5, and 2 mm. 280 degrees C. (538 degrees F.) max. temperature. 12 kW heater. 750W air blower. 3ph/230V. With dust collector. Built 2023. Previously used for food/beverage emulsion powder.

Used 3,200 Gallon Stainless Steel Tank – Vertical Dished Vessel with Multiple Po

Used- Stainless Steel Vertical Storage Tank, Approximately 3,200 Gallon Capacity. Approximately 88" diameter x 120" straight side. Tank features dished top and bottom heads, (2) 4" top openings, (4) 2" top openings, a 2" lower side outlet, a 3" bottom outlet, and a 4" center bottom outlet with approximately 32" discharge height. Equipped with a lower side manway with cover and supported by (4) stainless steel legs. Manufacturer identification tag not present. Possible applications include liquid storage, intermediate bulk storage, and batch holding of water, liquid ingredients, chemicals, and other compatible non-pressurized liquid products.

Unused CECO Peerless 324 Gallon 316 Stainless Steel Vertical Oxygen Separator Vessel | ASME Pressure Vessel

Unused CECO Peerless 324 Gallon 316 Stainless Steel Vertical Oxygen Separator Vessel | ASME Pressure Vessel. 42" ID Vertical Oxygen Separator, PMC Part No. VGSP-42I-380SS-001, Drawing No. 9558B-1, is a heavy-wall vertical ASME pressure vessel designed for high-pressure oxygen service and deflagration control applications. Fabricated entirely from 316 stainless steel in accordance with ASME Section VIII Division 1, 2023 Edition, the vessel is rated for full vacuum to 380 PSIG at 194F with a MAWP of 380 PSI at 194F, a MAP of 380 PSI at 100F, and an MDMT of -4F at 380 PSI. The separator is fully ASME U-stamped and National Board registered, requires RT1 radiography, and is hydrostatically tested to 494 PSI for one hour with no PWHT required. Construction includes a 1/2" thick SA-240-316 shell, 1/2" thick 2:1 ellipsoidal heads with 0.4024" minimum formed thickness, heavy-wall Schedule 160 drain and liquid outlet nozzles, reinforced manway assembly, four support legs, lifting lugs, and a davit arm assembly. The vessel includes multiple flanged process and instrumentation connections consisting of 2" inlet, liquid inlet, and outlet nozzles, 3" liquid outlet and drain nozzles, a 2" gas purging connection, 1" DPIT, pressure indicator, vent, and relief valve nozzles, dual 3/4" level gauge connections, dual 1" level controller connections, four 1" level switch connections, and an 18" Class 300 manway. Internal surfaces are oxygen cleaned with neoprene gaskets and flange covers installed for shipment, while the exterior is cleaned, de-scaled, and finished with a sugar blast coating. Estimated vessel weights are approximately 2,412 lbs empty, 5,154 lbs operating, and 5,163 lbs hydrotest weight, with an internal capacity of approximately 324 gallons and a center of gravity located 13.12" from datum. The engineering design package includes ASME VIII Division 1 stress calculations, nozzle reinforcement analysis, hydrostatic test verification, wind and seismic analysis, structural support calculations

MFR: Peerless

Unused CECO Peerless 316 Stainless Steel Oxygen Separator Pressure Vessel | 380 PSI ASME Vessel

Unused CECO Peerless 316 Stainless Steel Oxygen Separator Pressure Vessel | 380 PSI ASME Vessel. 42" ID Vertical Oxygen Separator, PMC Part No. VGSP-42I-380SS-001, Drawing No. 9558B-1, is a heavy-wall vertical ASME pressure vessel designed for high-pressure oxygen service and deflagration control applications. Fabricated entirely from 316 stainless steel in accordance with ASME Section VIII Division 1, 2023 Edition, the vessel is rated for full vacuum to 380 PSIG at 194F with a MAWP of 380 PSI at 194F, a MAP of 380 PSI at 100F, and an MDMT of -4F at 380 PSI. The separator is fully ASME U-stamped and National Board registered, requires RT1 radiography, and is hydrostatically tested to 494 PSI for one hour with no PWHT required. Construction includes a 1/2" thick SA-240-316 shell, 1/2" thick 2:1 ellipsoidal heads with 0.4024" minimum formed thickness, heavy-wall Schedule 160 drain and liquid outlet nozzles, reinforced manway assembly, four support legs, lifting lugs, and a davit arm assembly. The vessel includes multiple flanged process and instrumentation connections consisting of 2" inlet, liquid inlet, and outlet nozzles, 3" liquid outlet and drain nozzles, a 2" gas purging connection, 1" DPIT, pressure indicator, vent, and relief valve nozzles, dual 3/4" level gauge connections, dual 1" level controller connections, four 1" level switch connections, and an 18" Class 300 manway. Internal surfaces are oxygen cleaned with neoprene gaskets and flange covers installed for shipment, while the exterior is cleaned, de-scaled, and finished with a sugar blast coating. Estimated vessel weights are approximately 2,412 lbs empty, 5,154 lbs operating, and 5,163 lbs hydrotest weight, with an internal capacity of approximately 324 gallons and a center of gravity located 13.12" from datum. The engineering design package includes ASME VIII Division 1 stress calculations, nozzle reinforcement analysis, hydrostatic test verification, wind and seismic analysis, structural support calculations

MFR: Peerless