Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.

MFR: Ketema

Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI

Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,

MFR: Ketema

Used J.H. Day Plow Type Turbulent Mixer – 304 Stainless Steel, 3.5 Cu. Ft. | High-Performance Industrial Mixer with Side-Entering Pinned Disc Mill

Used- J.H. Day Plow Type Turbulent Mixer, 304 Stainless Steel. 3.5 Cubic feet total capacity. Non-jacketed chamber approximately 20" diameter x 22" straight side. 3" Diameter shaft with blades and end scrapers. Driven by a 7.5 hp, 3/60/230/460 volt, 1800 rpm Sterling variable Speed-trol motor. Includes a side entering pinned disc mill, driven by a 10 hp, 3/60/230/460 volt, 3490 rpm motor. Top access door with a charge port, 8" center bottom outlet with a manually operated plug valve. Includes a control panel. Mounted on a carbon steel frame.

MFR: J H Day

Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

Used- Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.

MFR: Gloucester

3.5" Readco Twin Screw Continuous Processor

Used- 3.5" Readco Twin Screw Continuous Processor, model 3 1/2 HVY DU. Heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die, with spare set of screw splines set up for end bearing housing, on base. Mfg. 1987.

MFR: Readco

Used Conair / Jetro Model 304 Strand Pelletizer – 600 lb/hr Plastic Pelletizing

Used Conair / Jetro Model 304 Strand Pelletizer 600 lb/hr Plastic Pelletizing Machine. Approximate capacity up to 600 lbs. per hour (depending on rotor and speed). Approximate 6" diameter x 4" face cutting rotor with 20 fixed blades. Approximate feed opening 3.5". Strand diameter 0.12", upper feed roll 3-1/4" diameter x 3-1/4" face, lower feed roll 1-9/16" diameter x 4" face. Driven by 2hp 3/60/230/460v 1750rpm XP motor. Serial# 6-040894.

MFR: Conair

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Stainless Steel Double Deck Circular Vibratory Screener, Model LS30S. 30" diameter stainless steel construction, double-deck design providing 3 separations, and a 1/2 HP, 3 phase, 60 Hz, 230/460 volt, 1140 RPM motor. Mounted on a painted carbon steel base with casters for mobility. Serial number 589-74F. Designed for particle separation, grading, classification, sizing, scalping, and fines removal. Possible applications include screening and classifying powders, granules, dry bulk materials, and liquid-solid mixtures.

MFR: Sweco

Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel

Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.

MFR: Tolhurst

Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder – High-Speed Lab & Production Compounding System

Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder High-Speed Lab & Production Compounding System. (2) 30 mm diameter side by side screws, 33.3:1 L/D ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. Driven by a 10.4 kw(14hp) -440-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Frame mounted, Control panel. Weight 1.1 tonnes. Extruder: 2800 mm L x 850 mm W x 1300 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Werner & Pfleiderer

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder – Compact Pilot Compounding System

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder Compact Pilot Compounding System. 30 KG (66 lbs) per hour. (2) 30 mm diameter side by side screws, 10:1 L/D ratio. Electrically heated water cooled barrel. Driven by a 4 kw (5.36hp) -440-volt AC drive motor via a gear box. Screw speed maximum 161 RPM. Frame mounted on 4 wheels. K-Tron T22 twin screw feeder. Control panel mounted on extruder. Weight approx. 400 kgs. Extruder: 1800 mm L x 800 mm W x 2200 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: APV

Used 30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body...

Used-30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body flange. Glass Col 9 circuit electric jacket heat with 9 each 1,650 circuits. One 3" 300# RFSO with sight glass, one 3" 300# pad flange, three 2" 300# RFSO flnges, one 1" 3000# coupling, one 1" flush mount bottom ball valve., three 3000# couplings, and three 1/2" 3000# couplings. Tank on a stand. Material 316 stainless steel. ASME "U" stamped. National Board Number1759. Internal welds has #3 polish.

Used Coaire CAS30S24 30 HP Rotary Screw Air Compressor With Schulz Dryer

Used Coaire Model CAS30S24 oil-injected, fixed-speed rotary screw air compressor, Serial #SS030HG187, with Schulz Model ADS 125 non-cycling refrigerated compressed air dryer, Serial #210009427. The Coaire CAS S-Series is a fixed-speed industrial rotary screw compressor line featuring a high-efficiency motor and cooler with direct or gear drive. The CAS030S is rated at 30 HP, with published S-Series capacities ranging from 127 CFM at 100 psi, 124 CFM at 125 psi, and 111 CFM at 150 psi depending on configuration. Included Schulz ADS 125 refrigerated air dryer has a nominal capacity of 125 SCFM, 1-1/4" NPT-F inlet/outlet connections, 115V/1-phase/60 Hz electrical service, and an 88 lb net weight. The dryer is designed to remove moisture from compressed air before it reaches downstream equipment.

MFR: Coair