Used Meat Equipment

Stock# 53146001

Used Maja Meat Slicer, Model FP100. Stainless steel. Cuts 40-130 slices per minute. The maximum cutting thickness is 23.4" (600 mm). Driven by a 19 KW-400Volt/50Cycle/3PH Motor. Overall dimensions 67" (2060 mm) long x 45" (1380 mm) width x 61" (1850 mm) high. Weight 1.5 tonnes. Serial # 45585. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Stock# 53230001

Used Dx Industrial Slicer, Series DX 1000. 7" Wide x 4" High x 18" Long Product Feed. up to 300-600 slices per minute. Previously used for ham and turkey.

Stock# 53121003

Used Wolfking Meat Grinder, Model B400-HD, 304 Stainless Steel. Trough 47" wide x 50" long x 18" deep. Carbon Steel Crushing screw approximately 16" diameter x 52" long. Driven by an approximate 200 HP (149kW) 3/60/460 volt, 1785 rpm motor. 14" Diameter die plate with 3/8" diameter holes. Mounted on frame with casters.. Serial# 62226.

Stock# 42051001

Used Meincke Two Roll Extruder/Expander. Model G426-404, Type GL-30. (2) Approximate 6'' diameter rolls, Stainless Steel. Dual drive, one for feed rolls, one for cutting die plate with control panel. Unit requires hopper and die plate. Includes dual AC Moog servo drives, Model G426-404, type GL-30.

Stock# 53121006

Used Wolfking Model B400-HD Meat Grinder, 304 Stainless Steel. Trough 17" wide x 52" long x 20" deep. Carbon Steel Crushing screw approximately 12" diameter x 54" long. Driven by a 200 HP (149kW) 3/60/460 volt, 1785 rpm motor. 14" Diameter die plate with 5/16" diameter holes. Mounted on frame with casters. Serial# 62227.

Stock# 44381001

Used Bridge Machine Patty Former, Model 240, 304 Stainless Steel. Approximately 21,600 patties per hour. Top self-feeding hopper with paddles and agitators. Bottom mould plate with approximate 4" x 4-1/2" oval patty die. Requires belt for discharge, Driven by a 5 hp, 3/60/230/460 volt, 1730 rpm motor. Mounted on casters.

Stock# 54502001

Used Bizerba Fully Automatic Vertical Slicer, Model VSI F. Equipped with a 330 mm (13-inch) grooved vacuum release blade, infinitely adjustable blade speed ranging from 160 to 300 RPM in 10 RPM increments. Depending on the food product and layout configuration, the machine is capable of producing between 30 and 80 slices per minute. Slice thickness is controlled through a motorized fine adjustment system with a range of 0.3 mm to 12 mm (0.01 to 0.5 inches). The slicer offers a maximum stacking height of 90 mm (3.5 inches) and weighs approximately 137 kilograms (302 pounds). The VSI F series is designed to process large logs and chunks of meat or cheese while minimizing end-piece waste to as little as 15 mm. It can accommodate round products up to 180 mm (7.1 inches) in diameter, with maximum product dimensions of 180 mm in height and 240 mm in width. 1/60/120V, Serial # 12061691.

Stock# 54511001

Used Vemag Robot 500 Continuous Vacuum Stuffer - High-Speed Sausage & Food Portioning System. Stainless steel construction. Fill rate up to 2,500 kg/hr, portion speeds up to 450 portions/min (depending on product). Includes 110 Liter hopper, built-in linker, casing holder with one linker horn set, and guillotine cut-off. Mounted on casters. 5 kW power, 3/60/220-240V. Built 2021, 523 hours run, Serial# 1286126.

Stock# 40646035

Used VEMAG Model 500 Vacuum Stuffer | High-Speed Sausage & Food Portioning System. All stainless steel construction, Fill rate up to 2,700 kg/h, portion speed up to 650 portions/minute, 230 liter hopper, self contained Busch vacuum pump, PC 878 Digital control panel. 220/480V/3PH/60HZ.

Stock# 40646036

Used Handtmann VF 608 Plus Continuous Vacuum Stuffer | High-Precision Filling & Linking System. 5 to 100,000 G filling range. Fill volume up to 2000 kg/hour. 100 liter split hopper. 10" digital color screen display. Includes Twist link drive, Gear Box, HV 414 Holding Device, straight and Link stuffing horns, machine can be set for 220V/440V/480V/575V3PH/60HZ.