Petro Chemical Equipment

Industrial Groen TDH-40 Tabletop Steam Kettle – 40-Quart, Tilting, Natural Gas

Used- Groen 40 Quart Capacity Table Top Kettle, Model TDH-40, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 29964, Serial# 29964. 1/60/110 Volt.

MFR: Groen

Used Littleford Day Mogul Double Arm Mixer – Model 100 – 100 Gallon – Jacketed – 75 HP – Vacuum Lid – Stainless Base

Used- Littleford Day Sanitary Mogul Double Arm Mixer, Model 100. 100 Gallon working capacity (150 total), 304 stainless steel on product contact areas. Jacketed bowl 40" left to right x 42" front to back x approximately 21" deep, rated 125 psi at 353 degrees F. Cored masticator blades, geared one end, hydraulically operated domed top cover suitable for vacuum with power pack sanitary split type stuffing boxes. (2) 6" Diameter bottom outlets. Mixer driven by a 75 hp, 3/60/208-230/460 volt, 1780 rpm motor thru a Foote-Jones reducer, ratio 40 to 1, approximate front blade 41 rpm, rear 27 rpm. Includes a control panel and a Torit stainless steel dust collector. Mounted on a stainless steel base. Serial# 42145-4629. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Littleford

Used Gemco Double Cone Blender – 100 Cu. Ft. Working Capacity, 304 SS, 7.5 HP Motor

Used- Gemco Double Cone Blender with approximately 100 cubic feet working capacity (140 cubic feet total capacity), constructed of 304 stainless steel and designed for efficient, large-batch blending of dry powders and granules. The unit is equipped with a 7.5 HP gear motor rated for 3/60/230/460 volt service at 1,770 RPM, pneumatic braking system, 18-inch diameter charging door with 8-inch access port, and a 12-inch center bottom discharge fitted with a manual butterfly valve. Featuring an 84-inch inside diameter belly band and the proven double cone blending design, this blender provides gentle, low-shear mixing and excellent blend uniformity for free-flowing materials while minimizing product degradation. Overall dimensions are approximately 156" long x 48" wide x 147" high, with an approximate weight of 12,000#. The large-capacity vessel is well suited for nutraceutical and dietary supplement manufacturers, food ingredient processors, spice and premix producers, bakery and beverage ingredient operations, chemical processors, and contract manufacturing facilities requiring efficient production-scale blending. The stainless steel construction offers durability, corrosion resistance, and ease of cleaning, making this unit an excellent choice for a wide range of food, nutraceutical, chemical, and industrial powder blending applications.

MFR: Gemco

Ross Model HDM 100 Stainless Steel Double Planetary Mixer

Used- Ross HDM 100 stainless double planetary mixer, 10100 gallon working capacity with 30 hp drive, designed for high viscosity production batches in chemicals, pharmaceuticals, cosmetics, and food. (2) Stirrers approximate orbital speed 30 rpm, stirrer speed 34 rpm. Top dust hood with charge port, bottom fume hood, air/oil lift. Requires a 34'' diameter x 28-1/2'' deep can. Driven an 30 hp, 3/60/460 volt, 1755 XP motor, thru Delroyd Model HV100 reduction gear, 59.4 to 1 ratio. Mounted on an I beam frame. Serial# 37432-1.

MFR: Charles Ross

IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. New.

NEW & IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. In -Stock .100 Cubic Foot working capacity. 108 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 44.9" wide x 93.8" long x 49.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 31 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 8" discharge height. Approximate weight 7,260 pounds. Approximate overall dimensions: 63.3" wide x 146.4" long x 80.8" high. Controls are available upon request.

MFR: Paul O Abbe

Used Ross PVM-100 Triple Motion Vacuum Mixer | 100 Gallon | Stainless | High Shear | 3 Mixers | Jacketed

Used Ross Triple Motion Vacuum Mixer, Model PVM-100. Approximately 100 gallon stainless steel jacketed change can. Vacuum-rated system equipped with three independently driven mixing assemblies consisting of a 10 HP three-wing anchor agitator with side and bottom scrapers, 10 HP high speed disperser, and 25 HP high shear rotor stator emulsifier. Unit features a hydraulic lift for raising the mixing head, jacketed vessel for heating or cooling, and includes the control panel. Designed for mixing, dispersing, homogenizing, and emulsifying high viscosity products. Suitable for processing creams, ointments, emulsions, adhesives, sealants, gels, pastes, and other high viscosity products for pharmaceutical, cosmetic, food, and specialty chemical applications. Built 2000.

MFR: Ross Industries

Used Patterson-Kelley 100 cu. ft. Twin-Shell Vacuum Dryer | 150 PSI / Full Vacuum | 10 HP Hazardous Duty | 304 SS | Serial #204190

Used- Patterson-Kelley 100 cu.ft. twin shell vacuum dryer. Jacket is rated for the 30 psi @ 250 F. The drying chamber is rated for 150 psi and full vacuum. Drying chamber is designed to turn between .96 to 7.66 rpm using a 10 hp reeves drive. Motor is tagged for hazardous location. The outer shell of each chamber measures 56" diameter x 96". The chamber has an 18" access panel. There is a 12" discharge at the bottom. Contact surfaces are constructed of 304 stainless steel and the jacket is carbon steel. Maximum density of product is 75 lbs per cu.ft. Overall dimensions are 19' 9" long x 83" wide x 10'1" tall. Serial # 204190. Requires 460 vac 3 phase electrical supply.

MFR: Patterson Kelley

Used JH Day Double Ribbon Blender – Approx. 100 Cubic Foot Stainless Steel

Used- JH Day approximately 100 cubic foot stainless steel double ribbon blender. 40" wide X 120" long X 48" deep. 8" center bottom discharge. Stainless steel covers. Driven by a 20hp 3/60 230/460volt 1760 rpm motor with Stober drive reducer 32.1:1 ratio.

MFR: J H Day

Groen 100 Gal Steam Jacketed Kettle – 125 PSI | Radicon Drive | TA100 SP

Used Groen Kettle, Model TA100 SP, 100 Gallon, Stainless Steel. Approximately 36" diameter x 30" deep. Open top, hemispherical bottom. Jacket rated 125 psi. Bridge Mounted Radicon Drive with Anchor Agitator. Provision for Teflon Wipers (Wipers not Included). Driven by a 2hp 3/60/230/460 volt, 1755 rpm gear motor 63:1 ratio. Openings top: (2) 4", 2", 1-1/2", 2-1/2" center bottom outlet with 10-1/2" discharge height. Serial# 88772. Mounted on 3 legs.

Used Littleford 100 Cu Ft Ribbon Blender – Sanitary Stainless Steel Mixer

Used Littleford Double Ribbon Blender, Model B100. Total vessel capacity 127 cubic feet, working capacity 100 cubic feet. 304 Stainless steel Sanitary Construction. Density 30-36 LB/Cubic foot. Approximately 120" long x 40" wide x 50" deep trough. hinged covers with safety grate. 4" diameter center bottom discharge with sliding disc valve. Driven by a 40hp, 3/60/460 volt, 1770rpm motor through reducer, 48.8 to 1 ratio. Mounted on carbon steel frame.

MFR: Littleford

Altam Process Knock Out Drum 100 Gallon Horizontal Vessel – 2023

Used Altam Process Knock Out Drum, Approximately 100 Gallon, Stainless Steel. Internal rated 15 psi @ 230 degrees F. Horizontal, dished heads. On stand. Serial# 631, Year 2023.

Unused Heritage BCast 1,000 Gallon Stainless Steel Storage Tank

Unused Heritage BCast Stainless Steel Products 1000 Gallon Single Wall Stainless Steel Storage Tank. Has 316 Stainless Steel Contact, 20 degree slope to center bottom outlet with 2" tri clamp fitting. 38" distance from floor to drain. Sidewall, top and bottom thickness is all 3.0 (12 GA). Has a #4 finish interior and a 2b finish outer walls.