Accutek AccuSnap Plunger Capper Rated to 120 CPM

MANUFACTURER INFORMATION

• Manufacturer: Accutek
• Product line: AccuSnap
• Model: 50-006-000
• Equipment type: Plunger-style T-cork capper
• Category: Packaging Equipment
• Subcategory: Cappers – Pluggers – Fitments
• Stock number: 7409037
• Serial number: A-17 202792
• Year built: 2015
• Condition: Used

MAIN PRODUCT DESCRIPTION

Used Accutek AccuSnap model 50-006-000 plunger-style T-cork capper capable of operating at speeds up to approximately 120 containers per minute. The machine is designed for closures ranging from 10 to 60 mm and uses an air-actuated plunger to insert or seat compatible T-corks and press-in closures. It includes a rotary bowl feeder with cap chute for closure orientation and delivery, an XP control panel, and a frame-mounted design. Electrical requirements are 110 volts, single phase, 60 Hz, drawing 10 amps. Overall dimensions are approximately 58 inches long x 39 inches wide x 88 inches high. Buyers should confirm their container dimensions, closure diameter and height, insertion-force requirements, compressed-air supply, production rate, and included change parts before purchase.

SPECIFICATIONS

• Manufacturer: Accutek
• Product line: AccuSnap
• Model: 50-006-000
• Stock number: 7409037
• Serial number: A-17 202792
• Year built: 2015
• Equipment type: Plunger T-cork capper
• Approximate production rate: Up to 120 containers per minute
• Cap-size range: 10–60 mm
• Plunger type: Air actuated
• Closure feeding system: Rotary bowl feeder
• Closure delivery: Cap chute
• Control panel: XP panel
• Mounting: Frame mounted
• Electrical requirements: 110 volts, single phase, 60 Hz
• Current draw: 10 amps
• Overall length: 58 inches
• Overall width: 39 inches
• Overall height: 88 inches

PRODUCT DETAILS

• Used Accutek AccuSnap closure-insertion system
• Model 50-006-000
• Designed for T-cork and compatible press-in closure applications
• Approximate output up to 120 containers per minute
• Handles closure diameters from 10 to 60 mm
• Air-actuated plunger
• Rotary bowl feeder
• Cap-orientation and delivery chute
• XP control panel
• Frame-mounted construction
• 2015 manufacture date
• 110-volt single-phase electrical service
• 10-amp electrical load
• Compact 58-inch x 39-inch footprint
• Overall height of 88 inches

APPLICATIONS

• T-cork insertion
• Bar-top cork insertion
• Press-in closure application
• Plug insertion
• Stopper insertion where compatible
• Fitment insertion where compatible
• Bottle capping
• Automated closure feeding
• Closure orientation
• Inline packaging-line integration
• Beverage bottle closure
• Food-product container closure
• Cosmetic container closure
• Personal-care container closure
• Chemical container closure where compatible
• Specialty-product packaging

SUITABLE CONTAINERS AND CLOSURES

Actual compatibility must be confirmed using container and closure samples.

• Bottles using T-corks
• Bottles using bar-top closures
• Containers using press-in closures
• Containers using compatible plugs
• Containers using compatible stoppers
• Glass bottles
• Plastic bottles
• Rigid containers
• Beverage bottles
• Sauce and specialty-food bottles
• Flavoring and extract bottles
• Cosmetic bottles
• Personal-care containers
• Specialty chemical containers where compatible
• Closures measuring 10–60 mm in diameter
• Containers capable of withstanding the required insertion force

FAQS

• WHAT TYPE OF CAPPER IS THIS ACCUTEK MACHINE?
This is an Accutek AccuSnap plunger-style capper designed for inserting or seating T-corks and compatible press-in closures.

• WHAT IS THE MODEL NUMBER?
The machine is Accutek model 50-006-000.

• WHAT IS THE MAXIMUM PRODUCTION SPEED?
The listing states a capacity of up to approximately 120 containers per minute. Actual output will depend on the container, closure, feed consistency, machine setup, and downstream line conditions.

• WHAT CAP SIZES CAN THE MACHINE HANDLE?
The listed closure-diameter range is 10 to 60 mm. The supported closure-height range is not specified.

• HOW ARE THE CLOSURES APPLIED?
The machine uses an air-actuated plunger to press compatible closures into or onto the container opening.

• DOES THE CAPPER INCLUDE A CLOSURE FEEDER?
Yes. The machine includes a rotary bowl feeder and cap chute for orienting and delivering closures to the insertion station.

• WHAT ARE THE ELECTRICAL REQUIREMENTS?
The machine requires 110 volts, single phase, 60 Hz and is rated at 10 amps.

• WHAT ARE THE MACHINE DIMENSIONS?
The listed overall dimensions are approximately 58 inches long x 39 inches wide x 88 inches high.

• WHAT YEAR WAS THE MACHINE BUILT?
The Accutek capper was built in 2015.

• WHAT IS THE SERIAL NUMBER?
The serial number is A-17 202792.

• CAN THIS MACHINE HANDLE BAR-TOP CORKS?
The machine is described as a T-cork capper, which may include compatible bar-top closure applications. Buyers should provide closure and bottle samples to confirm compatibility.

• CAN IT HANDLE SCREW CAPS?
The listing describes a plunger-style T-cork capper rather than a spindle or chuck screw capper. Screw-cap compatibility is not specified and should not be assumed.

• CAN AARON EQUIPMENT HELP DETERMINE WHETHER THIS CAPPER FITS MY APPLICATION?
Yes. Provide Aaron Equipment with the container material, container dimensions, neck finish, closure dimensions, closure style, required insertion force, and target production rate so the machine can be evaluated for the application.

• CAN AARON EQUIPMENT HELP WITH SHIPPING?
Yes. Aaron Equipment can help coordinate domestic or international freight. Request the machine weight, shipping dimensions, loading requirements, and destination information when obtaining a freight quote.

• Accutek AccuSnap capper
• Accutek 50-006-000
• T-cork capper
• plunger capper
• cork insertion machine
• press-in closure capper
• automatic cork capper
• bottle corking machine
• closure insertion machine
• used packaging capper

• 120 CPM capper
• 10–60 mm closure capper
• air-actuated plunger capper
• rotary bowl feeder capper
• cap chute system
• frame-mounted capper
• 110-volt capping machine
• single-phase capper
• XP panel capper
• automatic closure feeder

• T-cork insertion equipment
• bar-top corking machine
• press-in stopper machine
• plug insertion equipment
• bottle closure inserter
• beverage bottle corker
• specialty bottle capper
• automated closure orientation
• inline cork insertion machine
• bottle stopper capper

• used Accutek AccuSnap T-cork capper
• Accutek 50-006-000 plunger capper
• automatic T-cork insertion machine
• bottle capper with rotary bowl feeder
• air-actuated cork insertion machine
• capper for 10 to 60 mm closures
• Accutek capper rated to 120 containers per minute
• used bar-top corking machine
• press-in closure capper with cap chute
• 110-volt automatic cork capper

• used Accutek capper for sale
• buy used Accutek AccuSnap
• used T-cork capper for sale
• used cork insertion machine
• used press-in closure capper
• used bottle corker for sale
• surplus Accutek packaging equipment
• sell used capping equipment
• sell surplus packaging machinery
• used packaging equipment dealer