Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used Kice Venturi Jet Filter System with Rotary Airlock, Cyclone & Fan | Model VR32-10 TBR | Stainless Steel | 3500 SCFM. CKS48 Cyclone Collector. Barrel material of construction to be 12 ga. 304L stainless steel. Cone material of construction to be 12 ga. 304L stainless steel. Inlet transition to 12" O.D. Clean air outlet to have a horizontal air outlet to 14" O.D. with Kice SFS flange. Stock Outlet to mate Vortex Chamber. Vortex chamber to mate 71S12-3 sightglass assembly. Continuous interior and exterior welds. Four each carbon steel bolt-on support pads. Stainless steel rings and flanges. Bolt-on inspection door in the Vortex Chamber. Assembly hardware will not be stainless steel or equivalent unless otherwise specified. Stainless steel finish. Exterior weld splatter, smoke, and discoloration are removed and the weld will retain its general bead characteristics and profile. Uniform bright matte finish on the exterior stainless steel surfaces. Prepared with a glass bead blasting process. Interior welds will have splatter and smoke removed and be ground flush to a 180 grit finish. VBS 16x12x12 Airlock. 12" square inlet and outlet with a displacement of 1.1 CFR at 100% full. Fabricated 304L stainless steel endplates and housing. Inboard bearings with double lipped neoprene seals. Fabricated 304L stainless steel eight-vaned, "open end" rotor with aluminum bronze overlay. Driven by WEG 1 HP, 1725 RPM, TEFC, 575/3/60 NEMA Premium efficient motor. NOTE: Standard TEFC motor with no environmental marking/T Code. Motor mounted on an SM-Cyclodrive gear reducer, model CNHX-6100-Y, 29:1 (60 RPM) ratio. #50 chain drive to 20 RPM. Fixed motor mount with adjustable idler sprocket. Fully enclosed sanitary guards. Fully machined clearances of 0.004" to 0.006". Trailing edges relieved to 1/8" land on tips and sides of all rotor blades. Nedox CR+ coated rotor. Kice Model VR32-10 TBR Venturi-Jet Filter. Filter is complete with 377 square feet of filter media, selected to serve 3500 SCFM of dry, ambient, dust-laden
Manufacturer | KiceKice |
Model | VR32-10 TBR |
Category | Dust CollectorsDust Collectors |
Subcategory | Dust CollectorsDust Collectors |
Brand: Kice Industries
System Type: Venturi Jet Filter System
Model: VR32-10 TBR
Cyclone Collector: Model CKS48
Airlock: VBS 16x12x12 with gear reducer
Construction: 12 gauge 304L Stainless Steel
Motor: WEG 1 HP, 1725 RPM, TEFC, 575V, 3-phase, NEMA Premium
Gear Drive: SM-Cyclodrive CNHX-6100-Y, 29:1
Built-in Capacity: 377 sq. ft. of filter media rated for 3,500 SCFM
This Used Kice Venturi Jet Filter System, Model VR32-10 TBR, is a high-efficiency dust collection and air filtration system designed to handle up to 3,500 SCFM of dry, ambient, dust-laden air. Built with sanitary-grade 304L stainless steel, this system includes a Cyclone Collector (Model CKS48), rotary airlock (VBS 16x12x12), and blower fan assembly, making it ideal for food, pharmaceutical, and chemical processing environments where contamination and hygiene control are critical.
The filter media area totals 377 sq. ft., and the system features precision-machined internal tolerances (0.004"–0.006"), polished finishes (180-grit internal, glass bead matte external), and stainless steel construction throughout major process surfaces. It includes a Nedox CR+ coated rotor, sanitary guards, and fully enclosed gear-driven airlock, ensuring reliable and hygienic operation.
Filter Model: VR32-10 TBR
Cyclone Model: CKS48
Air Volume Capacity: 3,500 SCFM
Filter Media Area: 377 sq. ft.
Inlet: 12" O.D.
Clean Air Outlet: 14" O.D. with Kice SFS flange
Construction: 12 ga. 304L stainless steel (barrel and cone)
Vortex Chamber: Mates with 71S12-3 sightglass assembly
Airlock: VBS 16x12x12
Material: 304L SS endplates and housing
Displacement: 1.1 CFR @ 100% full
Drive: 1 HP WEG motor + SM-Cyclodrive (29:1 ratio, 20 RPM)
Rotor: 8-vane, “open end”, aluminum bronze overlay, Nedox CR+ coated
Clearance: 0.004” to 0.006”
Trailing Edges: 1/8” land on tips and sides
Frame: 4 bolt-on carbon steel support pads
Finish:
Interior welds flush ground to 180 grit
Exterior matte finish (glass bead blasted)
Weld discoloration and splatter removed
Ideal for high-efficiency dust collection and filtration in:
Food processing (grain, flour, sugar, starch)
Pharmaceutical manufacturing
Nutraceutical powder handling
Bulk solids conveying and bag dump stations
Chemical compound blending
Powder coating recovery systems
Plastics and polymer processing
Coffee roasting and grinding lines
Feed and grain milling
Dairy powder spray drying
Wheat flour, cornmeal, or rice flour
Sugar dust or cocoa powder
Spray-dried milk or whey protein
Coffee grind recovery
Resin or plastic powder recovery
Vitamin or supplement dust capture
Spice dust (turmeric, paprika, etc.)
Mineral and pigment powder separation
Chemical additives
Starch or glucose powder handling
Kice filter
Dust collector
Jet filter
Venturi filter
Rotary airlock
Cyclone separator
Air filtration
Stainless dust filter
SCFM filter
Kice dust system
Kice Venturi jet dust collector
Stainless steel cyclone collector
Kice VR32-10 TBR filter system
3500 SCFM filtration unit
Industrial dust collection system
Used Kice dust separator
Food-grade air filter system
Rotary valve with airlock
HEPA ready stainless filter
Kice air separator system
Used Kice VR32-10 TBR Venturi Jet Filter with stainless steel cyclone and rotary airlock
Industrial air filtration and dust collector system rated for 3500 SCFM
Stainless steel dust separator system with rotary valve and gear reducer drive
Kice Venturi jet filter system with Nedox coated rotor and clean-in-place design
Complete dust collector with CKS48 cyclone and sanitary-grade airlock discharge
304L stainless steel dust filtration unit with 377 sq ft media area for dry powders
Venturi air filter with rotary discharge and precision-machined tolerances
Sanitary-grade dust collection system with TEFC motor and Cyclodrive gearbox
Used air separator system for pharma or food with vortex chamber and sightglass
High-volume dust control filter with inboard bearings and bronze rotor overlay
Buy Kice dust filter system
Purchase used Venturi jet filter
Stainless steel cyclone separator buy
Buy rotary airlock dust separator
Food-grade air filter system for sale
Industrial dust collection unit buy
Kice VR32-10 TBR filter purchase
Air filtration system with cyclone
Used Kice airlock system
Jet filter system buy now
Sell Kice Venturi jet filter
Offer used cyclone dust collector
List stainless dust filtration unit
Resale rotary airlock separator
Sell food-grade air filter
Kice air separator for sale
Industrial filter system resale
Used dust collection system listing
Kice model VR32-10 resale
Offer cyclone and airlock system
Used Kice Venturi Jet Filter System with Rotary Airlock, Cyclone & Fan | Model VR32-10 TBR | Stainless Steel | 3500 SCFM. CKS48 Cyclone Collector. Barrel material of construction to be 12 ga. 304L stainless steel. Cone material of construction to be 12 ga. 304L stainless steel. Inlet transition to 12" O.D. Clean air outlet to have a horizontal air outlet to 14" O.D. with Kice SFS flange. Stock Outlet to mate Vortex Chamber. Vortex chamber to mate 71S12-3 sightglass assembly. Continuous interior and exterior welds. Four each carbon steel bolt-on support pads. Stainless steel rings and flanges. Bolt-on inspection door in the Vortex Chamber. Assembly hardware will not be stainless steel or equivalent unless otherwise specified. Stainless steel finish. Exterior weld splatter, smoke, and discoloration are removed and the weld will retain its general bead characteristics and profile. Uniform bright matte finish on the exterior stainless steel surfaces. Prepared with a glass bead blasting process. Interior welds will have splatter and smoke removed and be ground flush to a 180 grit finish. VBS 16x12x12 Airlock. 12" square inlet and outlet with a displacement of 1.1 CFR at 100% full. Fabricated 304L stainless steel endplates and housing. Inboard bearings with double lipped neoprene seals. Fabricated 304L stainless steel eight-vaned, "open end" rotor with aluminum bronze overlay. Driven by WEG 1 HP, 1725 RPM, TEFC, 575/3/60 NEMA Premium efficient motor. NOTE: Standard TEFC motor with no environmental marking/T Code. Motor mounted on an SM-Cyclodrive gear reducer, model CNHX-6100-Y, 29:1 (60 RPM) ratio. #50 chain drive to 20 RPM. Fixed motor mount with adjustable idler sprocket. Fully enclosed sanitary guards. Fully machined clearances of 0.004" to 0.006". Trailing edges relieved to 1/8" land on tips and sides of all rotor blades. Nedox CR+ coated rotor. Kice Model VR32-10 TBR Venturi-Jet Filter. Filter is complete with 377 square feet of filter media, selected to serve 3500 SCFM of dry, ambient, dust-laden
Brand: Kice Industries
System Type: Venturi Jet Filter System
Model: VR32-10 TBR
Cyclone Collector: Model CKS48
Airlock: VBS 16x12x12 with gear reducer
Construction: 12 gauge 304L Stainless Steel
Motor: WEG 1 HP, 1725 RPM, TEFC, 575V, 3-phase, NEMA Premium
Gear Drive: SM-Cyclodrive CNHX-6100-Y, 29:1
Built-in Capacity: 377 sq. ft. of filter media rated for 3,500 SCFM
This Used Kice Venturi Jet Filter System, Model VR32-10 TBR, is a high-efficiency dust collection and air filtration system designed to handle up to 3,500 SCFM of dry, ambient, dust-laden air. Built with sanitary-grade 304L stainless steel, this system includes a Cyclone Collector (Model CKS48), rotary airlock (VBS 16x12x12), and blower fan assembly, making it ideal for food, pharmaceutical, and chemical processing environments where contamination and hygiene control are critical.
The filter media area totals 377 sq. ft., and the system features precision-machined internal tolerances (0.004"–0.006"), polished finishes (180-grit internal, glass bead matte external), and stainless steel construction throughout major process surfaces. It includes a Nedox CR+ coated rotor, sanitary guards, and fully enclosed gear-driven airlock, ensuring reliable and hygienic operation.
Filter Model: VR32-10 TBR
Cyclone Model: CKS48
Air Volume Capacity: 3,500 SCFM
Filter Media Area: 377 sq. ft.
Inlet: 12" O.D.
Clean Air Outlet: 14" O.D. with Kice SFS flange
Construction: 12 ga. 304L stainless steel (barrel and cone)
Vortex Chamber: Mates with 71S12-3 sightglass assembly
Airlock: VBS 16x12x12
Material: 304L SS endplates and housing
Displacement: 1.1 CFR @ 100% full
Drive: 1 HP WEG motor + SM-Cyclodrive (29:1 ratio, 20 RPM)
Rotor: 8-vane, “open end”, aluminum bronze overlay, Nedox CR+ coated
Clearance: 0.004” to 0.006”
Trailing Edges: 1/8” land on tips and sides
Frame: 4 bolt-on carbon steel support pads
Finish:
Interior welds flush ground to 180 grit
Exterior matte finish (glass bead blasted)
Weld discoloration and splatter removed
Ideal for high-efficiency dust collection and filtration in:
Food processing (grain, flour, sugar, starch)
Pharmaceutical manufacturing
Nutraceutical powder handling
Bulk solids conveying and bag dump stations
Chemical compound blending
Powder coating recovery systems
Plastics and polymer processing
Coffee roasting and grinding lines
Feed and grain milling
Dairy powder spray drying
Wheat flour, cornmeal, or rice flour
Sugar dust or cocoa powder
Spray-dried milk or whey protein
Coffee grind recovery
Resin or plastic powder recovery
Vitamin or supplement dust capture
Spice dust (turmeric, paprika, etc.)
Mineral and pigment powder separation
Chemical additives
Starch or glucose powder handling
Manufacturer | Kice |
Model | VR32-10 TBR |
Category | Dust Collectors |
Subcategory | Dust Collectors |
Kice filter
Dust collector
Jet filter
Venturi filter
Rotary airlock
Cyclone separator
Air filtration
Stainless dust filter
SCFM filter
Kice dust system
Kice Venturi jet dust collector
Stainless steel cyclone collector
Kice VR32-10 TBR filter system
3500 SCFM filtration unit
Industrial dust collection system
Used Kice dust separator
Food-grade air filter system
Rotary valve with airlock
HEPA ready stainless filter
Kice air separator system
Used Kice VR32-10 TBR Venturi Jet Filter with stainless steel cyclone and rotary airlock
Industrial air filtration and dust collector system rated for 3500 SCFM
Stainless steel dust separator system with rotary valve and gear reducer drive
Kice Venturi jet filter system with Nedox coated rotor and clean-in-place design
Complete dust collector with CKS48 cyclone and sanitary-grade airlock discharge
304L stainless steel dust filtration unit with 377 sq ft media area for dry powders
Venturi air filter with rotary discharge and precision-machined tolerances
Sanitary-grade dust collection system with TEFC motor and Cyclodrive gearbox
Used air separator system for pharma or food with vortex chamber and sightglass
High-volume dust control filter with inboard bearings and bronze rotor overlay
Buy Kice dust filter system
Purchase used Venturi jet filter
Stainless steel cyclone separator buy
Buy rotary airlock dust separator
Food-grade air filter system for sale
Industrial dust collection unit buy
Kice VR32-10 TBR filter purchase
Air filtration system with cyclone
Used Kice airlock system
Jet filter system buy now
Sell Kice Venturi jet filter
Offer used cyclone dust collector
List stainless dust filtration unit
Resale rotary airlock separator
Sell food-grade air filter
Kice air separator for sale
Industrial filter system resale
Used dust collection system listing
Kice model VR32-10 resale
Offer cyclone and airlock system
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory