Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used Wyssmont Turbo Dryer- Cooler Model OE-20. The main dryer is 316 stainless steel for normal material contact parts: trays, wipers, levelers, floor; and the rest of the dryer (the gas contact parts): inner walls, interior roof and all duct work is 304 stainless steel. External parts are carbon steel painted with "Steel It". Dryer has 16 shelves for drying and 4 shelves for cooling. Unit can be converted to an all rrying unit with no cooling if desired with modifications. Dryer is driven by a 3/4 hp variable speed tray drive and a 3 hp variable speed turbo fan drive. Basic dryer shipping dimensions are 13' 4-1/4" tall x approximately 11'8" wide depending on shipping orientation/firection. Dryer has a secondary and separately removable structural steel base that is 48" tall. Multiscrew Feeder: Wyssmont Model Msf-1554-173; 1 hp, 460 volt, 3 phase variable speed from 2.3 to 20 rpm. Stainless Steel. Discharge Airlock: Wyssmont Model Al-815; 1/2 hp, 230/460/3/60 rated up to 75 cfh with normal operating speed of 12 cfh. Stainless steel. Recirculation Fan: 7.5 Hp, 230/460/3/60 normally running at nominal 6400 acfm at 210F at 1056 rpm, belt driven. Stainless steel gas contact parts. Exhaust Fan: 5.0 Hp, 230/460/3/60, normally running at 5750 acfm at 140F at 1082 rpm. Stainless Steel Gas Contact Parts. Cooling Fan: 5.0 Hp, 230/460/3/60 Normally Running At 4400 Acfm At 70F At 1349 Rpm. Stainless Steel Gas Contact Parts. Steam Coil Package: Six Bank Steam Coil Package. Slide Out Coil Design. At Normal Operating Condition The Original Steam Consumption Was Estimated To Be 862 Lb/Hr At 150 Psig With A Max Design Limit Of 1240 Lb/Hr. Stainless Steel Gas Contact Parts. Heat Recuperator: Designed To Preheat The Incoming Drying Air With The Exhaust Air. Stainless Steel Construction. Built In 1987.
Used Wyssmont Turbo Dryer- Cooler Model OE-20. The main dryer is 316 stainless steel for normal material contact parts: trays, wipers, levelers, floor; and the rest of the dryer (the gas contact parts): inner walls, interior roof and all duct work is 304 stainless steel. External parts are carbon steel painted with "Steel It". Dryer has 16 shelves for drying and 4 shelves for cooling. Unit can be converted to an all rrying unit with no cooling if desired with modifications. Dryer is driven by a 3/4 hp variable speed tray drive and a 3 hp variable speed turbo fan drive. Basic dryer shipping dimensions are 13' 4-1/4" tall x approximately 11'8" wide depending on shipping orientation/firection. Dryer has a secondary and separately removable structural steel base that is 48" tall. Multiscrew Feeder: Wyssmont Model Msf-1554-173; 1 hp, 460 volt, 3 phase variable speed from 2.3 to 20 rpm. Stainless Steel. Discharge Airlock: Wyssmont Model Al-815; 1/2 hp, 230/460/3/60 rated up to 75 cfh with normal operating speed of 12 cfh. Stainless steel. Recirculation Fan: 7.5 Hp, 230/460/3/60 normally running at nominal 6400 acfm at 210F at 1056 rpm, belt driven. Stainless steel gas contact parts. Exhaust Fan: 5.0 Hp, 230/460/3/60, normally running at 5750 acfm at 140F at 1082 rpm. Stainless Steel Gas Contact Parts. Cooling Fan: 5.0 Hp, 230/460/3/60 Normally Running At 4400 Acfm At 70F At 1349 Rpm. Stainless Steel Gas Contact Parts. Steam Coil Package: Six Bank Steam Coil Package. Slide Out Coil Design. At Normal Operating Condition The Original Steam Consumption Was Estimated To Be 862 Lb/Hr At 150 Psig With A Max Design Limit Of 1240 Lb/Hr. Stainless Steel Gas Contact Parts. Heat Recuperator: Designed To Preheat The Incoming Drying Air With The Exhaust Air. Stainless Steel Construction. Built In 1987.
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory