https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/Glatt-GSX-1500-BD_52753001_aa.jpg

Stock No.:

52753001

Used Glatt GSX-1500-BD Industrial Tablet & Film Coater – 1800mm Diameter

Used-Glatt GSX-1500-BD Coater, diameter 1800mm, coater length 2200mm, door opening diameter 550mm, cutler-hammer model E710 touch screen control, with control panel, valves, pumps, motors and extraction unit. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Glatt

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Carbon/Hughes-Anderson-AET_47233001_aa.jpg

Stock No.:

47233001

Unused Hughes-Anderson 2-Pass Shell & Tube Heat Exchanger – 7,110 Sq. Ft., 600 PSI

Unused- Hughes-Anderson 2 Pass Shell & Tube Heat Exchanger, 7,110 Square Feet, Type AET, Size 52" x 28', Horizontal. Carbon steel shell rated 600 psi/Full Vacuum at -50 to 400 degreesF. (989) 1" Diameter x 28 long carbon steel tubes rated -50 to 500 psi/Full Vacuum at 400 degrees F. Openings shell (2) 10", openings for tubes (2) 14". Mounted on saddles. Serial# 9683-1, National Board# 6006, built 2008.

MFR: Hughes Anderson

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Carbon/Hughes-Anderson-AET_47233002_aa.jpg

Stock No.:

47233002

Industrial Unused Hughes-Anderson 2-Pass Shell & Tube Heat Exchanger – 7,110 Sq. Ft. | Horizontal

Unused- Hughes-Anderson 2 Pass 7,110 Square Feet, Type AET Shell & Tube Heat Exchanger, Size 52" x 28'. Horizontal. Carbon steel shell rated 600 psi/Full Vacuum at -50 to 400 degreesF. (989) 1" Diameter x 28 long carbon steel tubes rated -50 to 500 psi/Full Vacuum at 400 degrees F. Openings shell (2) 10", openings for tubes (2) 14". Mounted on saddles. Serial# 9683-2, National Board# 6007, built 2008.

MFR: Hughes Anderson

https://images.aaronequipment.com/ItemImages/Filters/Rotary-Vacuum-Filters/Alar-Engineering-6120_13880001_aa.jpg

Stock No.:

13880001

Used Alar Auto-Vac 6120 Rotary Vacuum Drum Filter | 6' x 12' | Trailer-Mounted Mobile Dewatering System

Used- Mobile Alar Auto-Vac Model 6120 Rotary Vacuum Drum Filter System, Trailer Mounted Mobile. 6' diameter by 12' long drum, providing approximately 226 sqft. of effective filter surface area. Designed for high-capacity solid-liquid separation, the unit operates continuously under vacuum pressure to efficiently remove suspended solids. The system is mounted on a skid trailer mounted, with a footprint of roughly 10' x 17' and includes an auxiliary skid measuring approximately 8'4" x 18'9". With a total connected horsepower of about 99 HP and a shipping weight near 18,000 lbs, the 6120 is built for demanding applications in wastewater treatment, chemical processing, and other industrial operations requiring reliable dewatering performance. More information about this trailer mounted system upon request. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alar Engineering

https://images.aaronequipment.com/ItemImages/Filters/Rotary-Vacuum-Filters/Alar-Engineering-660_10128083_aa.jpg

Stock No.:

10128083

Used Alar Auto-Vac Model 660 Rotary Vacuum Drum Filter – Stainless, Self-Cleaning, 113 Sq. Ft. Used Alar Auto-Vac Model 660 Rotary Vacuum Drum Filter – Stainless, Self-Cleaning, 113 Sq. Ft.

Used- Alar Engineering Corporation Auto-Vac, Rotary Vacuum Drum Filter System, Model 660 . 6' x 6' stainless steel drum with approximately 113 sq.ft. of filter area. Equipped with auto advancing knife discharge, receiver and pre-mix tanks, 40 hp vacuum pump and control pannel. 460 vac 3 ph and 120 vac 1 ph power required. Automatic, self-cleaning wastewater treatment system for a variety of water-based effluents. Filter drum skid 118" wide x 152" long x 94" tall. Drum is 72" OD x 75" long. Tank skid is 93" wide x 186" long x 112" tall.

MFR: Alar Engineering

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Winding-and-Unwinding/Dusenberry-Engr-815_10151037_aa.jpg

Stock No.:

10151037

72" Dusenberry Model 815 Duplex Score Cut Slitter-Rewinder

Used- 72" Dusenberry Model 815 Duplex Score Cut Slitter-Rewinder. Having a 25 hp DC and 15 hp DC dual drive system with score slitting assembly duplex differential center wind. Presently set up for one zone control per winding shaft for maximum 28" diameter rolls on 3" cores. Separate Dusenbery Model 863 AK single station unwind for 40" diameter mill rolls on 3" cores with fife guide edge system..

MFR: Dusenberry Engr

https://images.aaronequipment.com/ItemImages/Cyclones/Cyclones/Imperial_54352006_aa.jpeg

Stock No.:

54352006

Imperial Systems Industrial Cyclone Dust Collector – 72" Carbon Steel Cyclone

Used Imperial Systems Carbon Steel Cyclone. Approximate 72" diameter to 24" diameter cyclone. With frame & rotary valve.

MFR: Imperial

https://images.aaronequipment.com/ItemImages/Cyclones/Cyclones/Imperial_54352007_aa.jpeg

Stock No.:

54352007

Industrial Cyclone Dust Collector 72" to 24" with Rotary Airlock

Used Imperial Systems Cyclone, Carbon Steel. Approximate 72" diameter to 24" diameter cyclone. With frame & rotary valve. Not Installed.

MFR: Imperial

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Belt-Dryers/Belt-O-Matic-205BX_54035001_aa.jpg

Stock No.:

54035001

Beltomatic 205BX Belt Dehydrator – 60 Sq. Ft., 300 lbs/hr Water Removal, Low Hours

Used Beltomatic Belt Dryer/Dehydrator, Model 205BX. Approximate web 6' wide x 12' length. Effective square foot area 60. 2 Million btu rating per hour, 7,500 maximum cfm. Capable temperature of 295 degrees F, 5-7 psi. Maximum 300lbs water evaporation. Fines conveyor in the bottom of dryer. Adjustable leveling gate; Variable speed web. Burner fan and exhaust fan. LP or natural gas. Approximately 4734 hours. Serial # 21B0726N. New in 2019.

MFR: Belt-O-Matic

https://images.aaronequipment.com/ItemImages/Mixers/Continuous-Mixer/Munson-Machinery-CM-72x20_54565001_aa.jpg

Stock No.:

54565001

Used Munson CM-72x20 Rotary Continuous Mixer

Used Munson Rotary Continuous Mixer, Model CM-72x20. Approximately 30 HP motor. Heavy-duty rotary drum continuous mixer featuring an approximately 72" diameter x 20' long rotating drum. Designed for continuous blending of powders, granules, flakes, pellets, and other bulk solids. Provides gentle yet highly uniform mixing with low energy consumption and short residence times. Suitable for food products, chemicals, minerals, fertilizers, plastics, pigments, and specialty materials. Built 2021.

MFR: Munson Machinery

https://images.aaronequipment.com/ItemImages/Mills/Roller-Mill/CE-Raymond_35196_c.jpg

Stock No.:

35196

Used C.E. Raymond #73412 Roller Mill – 350 HP Motor, Industrial Grinding

Used- C.E. Raymond #73412 Roller Mill. Directly driven by a 350 hp, 3/60/4160V, 585 rpm motor. Unit is equipped with a gear and intermediate shaft, horizontal shaft assembly with pinion, external oil lubrication system, vertical shaft, mill bottom assembly with oil reservoir, spider assembly with caps, plow support assembly with (4) four plow bodies and (4) plow tips, (4) four oil journal assemblies each with grinding roll, mill base with port liners and grinding ring, mill side and system fan directly driven by a 150 hp, 3/60/4000V, 1175 rpm motor. Less mill base air housing assembly, less dual feeder assemblies and less whizzer separator assembly, also missing the gearbox. Unit has low operating hours and is in excellent condition. This machine is commonly used in the production of Gypsum Board and Drywall.

MFR: CE Raymond

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Phlauer-AJSP-486-6-SPSS_53824001_aa.jpg

Stock No.:

53824001

Used Phlauer / A&J Mixing Modular Paddle Mixer – 74 Cu. Ft., 30 HP, 304 Stainless Steel

Used- Phlauer / A&J Mixing Modular Paddle Mixer, Model AJSP 486-6 SPSS. Approximate 74 cubic feet, 304 stainless steel. Non-jacketed trough approximate 48" wide x 78" long x 44" deep. 5" Diameter shaft with (16) 13-3/4" x 6-3/4" x 3/8" thick paddles welded on 2" diameter posts. Driven by a 22kW (30 hp), 3/60/230/460 volt, 1770 rpm gear motor, 75.69 to 1 ratio, final rpm 23. Openings top: 12", 2-3/4", side: (4) 30" x 15-1/2" hinged inspection doors. 14" x 8" End bottom discharge with pneumatic discharge valve. Includes outboard roller bearings, air seals, and a control panel. Mounted on (4) stainless steel legs. Serial# 99111.

MFR: Phlauer

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.