Complete Sheeting Line – 24" Cooling Stack, Puller Cutter, Trim Press & Heater

Used- 24" Vinyletech Abbottstown Sheeting Cooling Stack, Model D9060. Approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, serial# 22654, Vinyletech serial# 06181. includes Abbottstown puller cutter combo, model D9051, serial# 22952, Abbottstown trim press, model D8652, serial# 22657, 36 kw Compaheat heating system, model TC4-9-4P4 zone, 9 kw per zone, 208-230 volt, serial# 23010, 75 kva transformer.

Used Reiter Automatik ASG300 Strand Pelletizer – 30-Knife Rotor, 10,500 lbs/hr Capacity

Used- Reiter Automatik Strand Pelletizer, Model ASG300. (30) Knife solid helical rotor, power roll feed with pneumatic tension control. Belt driven motor. Mounted on a base. Approximate rating up to 10,500 pounds per hour. Serial # 18002-3188.

MFR: Rieter

Used Vector Freund Hi-Coater Coating Pan – Stainless Steel, 24" Diameter

Used- Vector Freund Hi-Coater Coating Pan. Stainless Steel coating chamber approximate 24" diameter x 16" deep with internal baffles. Unit includes blowers and control panel. New York Blower, Shop # C-5206-110, size 2104A05, driven by 5 hp, 3/60/230/460 volt, 3470 RPM motor, 3.5" diameter inlet, 3" outlet. Requires spray gun. Previously used in pharmaceutical application.

MFR: Vector/Freund

Used Thomas Engineering Accela-Cota Coating Pan – Model 24-111, Stainless Steel

Used- Thomas Engineering Coating Pan, Model "Accela-Cota" 24-111, Stainless Steel. Approximate working capacity of 40 pounds. Serial # 24-328.

MFR: Thomas Engineering

Used Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer – 24” x 20’ ASME Rated

Used- Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer, 24" diameter X 20' long. Constructed from 316L stainless steel. Screws and jacket are rated for 100 PSI/FV @ 350 degrees / -20 degrees Fahrenheit. Previously used to dehydrate food waste. Previously heated by hot oil. ASME code built.

MFR: Anderson Dahlen

Stainless Steel 24” U-Trough Screw Conveyor with Thermal Heating & Cooling

Used- S. Howes U-Trough Thermal Processing Screw Conveyor, Model 24U24-JS. 24" diameter screw, 24' Long inside dimension. Oversized 16" diameter shaft pipe, Journals thru-bored to allow heating fluid flow through shaft. 22' Overall jacket length; 14.9 psig design pressure. Designed for thermal fluid heating/cooling media or low pressure steam. 316 stainless steel construction in product contact and jacket areas. 3" inlet/outlet on main body; 1" on heated/cooling screw. Fulton control panel 120-VAC, 1-Phase, 60HZ with 6 digital PID temperature controllers. 3 x 3" pneumatic valves for inlet fluid control on main body of screw conveyor. 1 x 1" pneumatic valve for inlet fluid control on screw. 10 x 3" manual gate valves for support plumbing, Sectional covers. Driven by a 15 hp, 3/60/460V motor. Machine # 117390, New in 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: S Howes

Used Kason 24" Portable Stainless Steel Screener | Model K-24-2-SS-P | 1/3 HP Motor | Includes Decks, Rings & Screens

Used Kason 24" Portable Stainless Steel Screener, Model K-24-2-SS-P, 1/3 HP Motor. Includes Decks, Rings & Screens. Driven by a 1/3hp, 3/60/460 volt, 1140rpm motor. Mounted on carbon steel cart with casters. Serial# KC-1045.

MFR: Kason

Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System

Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.

MFR: Denver

Used Oberlin OPF-24 Fully Automatic Horizontal Pressure Filtration System

Used Oberlin Fully Automatic Horizontal Pressure Filtration System, Model OPF-24. Serial/configuration OPF24-165MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.

MFR: Oberlin

Used Oberlin OPF-24 Pressure Filtration System – Up to 960 GPM

Used- Oberlin Model OPF-24 Fully Automatic Horizontal Pressure Filtration System. Serial/configuration OPF24-167MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.

MFR: Oberlin

Used Bird 3600 Stainless Steel Decanter Centrifuge – 24" x 60" Bowl, 30 HP with Hard-Faced Scroll

Used Bird 3600 Stainless Steel Decanter Centrifuge 24" x 60" Bowl, 30 HP with Hard-Faced Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.

MFR: Bird

Used Bird 3600 Industrial Dewatering Centrifuge – 24" x 60" Stainless Bowl with Wear-Resistant Scroll

Used Bird 3600 Industrial Dewatering Centrifuge 24" x 60" Stainless Bowl with Wear-Resistant Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.

MFR: Bird