Used – Praj Industries 1185 sq. ft. Horizontal Shell & Tube Heat Exchanger – 304L SS Shell, NB Code

Used Praj Industries 1185 sq. ft. Horizontal Shell & Tube Heat Exchanger 304L SS Shell, NB Code. (2) saddle supports. (4) lifting trunnions. 304L stainless steel shell. 304 stainless steel tubes. 304 stainless steel heads. 25 psi @ 293 degrees F shell. 56 psi @ 122 degrees F. tubes. 1" tube diameter. 9'6" tube length. 460 tube holes. 1.25" tube pitch. .063" tube wall. 1 pass shell. 2 pass tubes. NB code. 4" and 8" shell nozzles. (2) 12" tube nozzles. (9) baffles. 10" baffle spacing. 2'8" shell diameter. 13'8" overall length. Built 2008.

Used 4,500 Liter Stainless Steel Beer Barrel Tank | Jacketed Brewery Process Vessel

Used- 1188.77 gal (4500 L) Beer Barrel tank, built by ABC- Kinglai Co, Ltd for Glacier Tanks LLC. Built 05/2016. This stainless steel tank is about 59" in diameter with a 81" straight side and 12" dished heads. Volume 4.5 m3. Design pressure shell 0.1 MPa, jacket 0.15 Mpa. Design temperature 98 degrees C. jacket on the side of tank only. Dished heads. Two top lift lugs. Tank has four legs. Top has one 3" tri clamp nozzle and one 1.25" tri clamp nozzle. Bottom nozzles one 1.25" tri clamp and one 1.5" tri clamp. Side nozzles one 16" x 13" elliptical hinged lid manway, five 1.25" tri clamp nozzles for jackets, two 1.25" tri clamp, two .75" tri clamp nozzles, and one .75" coupling. Serial# AKL16-A-10005. Overall dimensions70" x 70" x 122" tall.

MFR: ABC

Used Sonoma Stainless 11,960 Gallon Wine Tank | Glycol Jacketed & Insulated Stainless Vessel

Used- Sonoma Stainless Wine Tank, 11,960 gallon. Stainless steel. Glycol jacketed. Exterior foam insulated. 236" overall height x 127" diameter. 34" high legs/tank stand. Previously used for wine storage.

Used Vivtek LSD-H1500F/T Spray Dryer | Lab Scale Spray Drying System 1500 ml/hr

Used- Vivtek Instruments Spray Dryer, Model LSD-H1500T. 1500 ml H2O/hour evaporation rate. Two-fluid nozzle w/ needle, 1/1.5mm atomizer. 12" diameter x 16" length drying chamber. 5" diameter x 20" length cyclone. 80-280 degrees C (176-536 degrees F.) inlet gas temp., 50-120 degrees C (120-248 degrees F.) outlet gas temp. 3,000 W heater. 200 cfm airflow. 50/60 hZ, 230V. Built 2022.

Bonnot Co. 12" Extruder – 40 HP Jacketed Grooved Barrel Industrial Screw Extruder

Used- The Bonnot Co. 12" Extruder. 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height approximately 41-1/2". Mounted on painted carbon steel frame with 4 legs. Serial # B3269. S. O. B6669. Date 8-16-93. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Bonnot

Bonnot Co. 12" Industrial Extruder – 40 HP Jacketed Barrel Screw Extruder (2000)

Used- Bonnot Co. 12" Industrial Extruder 40 HP Jacketed Barrel Screw Extruder (2000). 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height approximately 41-1/2". Mounted on painted carbon steel frame with 4 legs. Serial # B3269. S. O. B6669. Date 8-16-93. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Bonnot

Used Buhler AG MOXJ-27/200 Continuous Intensive Mixer | 316 Stainless Steel Industrial Mixer

Used Buhler AG MOXJ-27/200 Continuous Intensive Mixer | 316 Stainless Steel Industrial Mixer. Serial number 20762199. Constructed of 316 stainless steel. It is designed with a screw infeed, then a 12" dia. x 73" long mixing chamber. The rotor has 8 rows of 40 each 1.5" wide x 2.125" long x .375" paddles. The inlet and outlet are roughly 7 3/4" x 4 3/4". It has a side access door that is nearly the length of the mixing chamber. It is driven by a 17.3 KW (23hp) TEFC motor. 460 vac 3 ph electric power required. It can mix up to 4,000 kg/hr. Overall dimensions are 104" long x 48" wide x 37.25" tall mounted on its stainless steel stand.

MFR: Buhler Inc.

Used Twin Screw Stainless Steel Hollowscrew Dryer. Twin 12" diameter x 128" long scre

Used Twin Screw Stainless Steel Hollowscrew Dryer. Twin 12" diameter x 128" long screws. Trough is jacketed and insulated. The trough measures 142" long x 20.5" wide x 16" deep. The trough top has a 13.25" x 16" inlet, 6" x 9" inlet, and grating on the rest of the top. 6" diameter flanged outlet with gate valve. Screws are driven by a 1.5 hp 1140 rpm motor through a reducer down to 6.9 rpm. Dryer sits on a carbon steel frame with catwalk and ladder. Overall dimensions are 75" wide x 205" long x 120" tall. Requires 230/460 vac 3 phase electrical supply.

Used Screw Conveyor – 12" Diameter x 6' Long, Stainless Steel | Efficient Bulk Material Handling for Industrial Applications

Used- Screw Conveyor, 12" diameter x 6' long, stainless steel. "U" Trough style with cover and motor.

MFR: Unknown

Used Beringer Model 1200 Slide Plate Screen Changer – 12" Breaker Plates, Hydraulic Power Pack

Used- Beringer Model 1200 Slide Plate Screen Changer. (2) Nominal 12" diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42" discharge height. Package includes a 10 HP Power Motion hydraulic power pack with two(2) with high pressure accumulators. Screen changer is missing hydraulic cylinder and guards.

MFR: Beringer

Used MGB 12" Slide Plate Screen Changer – High-Performance Polymer Filtration

Used- MGB Model SC12 Slide Plate Screen Changer. (2) Nominal 12" diameter breaker plates. Unit is mounted on a stand with casters supplying approximately 42" discharge height. Package includes a 10 HP Power Motion hydraulic power pack with four (4) high pressure accumulators. Job# 1700. Serial# SC12-0697-156.

MFR: MGB

Used MGB Model SC12 Slide Plate Screen Changer – 12" Breaker Plates, Hydraulic Power Pack

Used- MGB Slide Plate Screen Changer, Model SC12. (2) Nominal 12" diameter breaker plates. Unit is mounted on a stand with casters supplying approximately 42" discharge height. Package includes a 10 HP Power Motion hydraulic power pack with four (4) high pressure accumulators.

MFR: MGB