Used Urschel Dicers - Slicers

Stock# 11252185

Used Urschel Model G-A Dicer, set up for 5/16" dices. Driven by 2 HP, 208 Volt, 3-phase 60 Hz motor. Previously used at production kitchen to supply meals for school district. Manufacturer info: The Model G-A produces uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables. Maximum infeed product entering either machine should not exceed 5-1/2" (140 mm) in any dimension. A wide selection of interchangeable cutting parts enables the user to obtain gentle, clean cutting through a wide range of sizes at high production capacities. Mounted on stainless steel portable frame with control panel.

Stock# 11252186

Used Urschel G Dicer, driven by 2 HP motor, previously dicing apples 3/8" x 3/8". Currently less cutting blades..

Stock# 11252187

Used Urschel M Dicer / Strip Cutter, Stainless Steel construction. Capable of cutting square or rectangular dices from 1/8" x 3/16" to 1-1/2" x 3", maximum thickness 1". Belt fed to dicing area with feed roll, circular knives, stripper plate, feed drum, crosscut knives. Complete with drive and control panel. Mounted on a stainless steel frame.

Stock# 48193006

Used Urschel Model GK-A Dicer. Currently Set 3/8" Dice. Electrical requirements: 460 Volt, 3 Phase Impeller housing is grooved. Stainless steel construction. Mounted on casters. Serial# 4768.

Stock# 52156001

Used Urschel Comitrol Processor, Model 3600, Stainless Steel. Approximate 7" diameter x 3" deep cutting head, impeller driven by approximate 10hp motor with brake. Has feed hopper. Mounted on stainless steel frame with casters. Serial# 249. Last used in Aloe.

Stock# 52848023

Used Urschel Comitrol Spindle Drive Assembly, for a Model 9300, Stainless Steel Construction. 4" diameter x 4" long.

Stock# 53125004

Used Urschel Dicer, Model G-A. Food grade stainless steel construction; Up to 5.5" any dimension product size; Strip cut, slice, and dice cut types; Approx. 18" L x 12" W x 45" H feed hopper dims; Approx. 7" L x 12" W x 30" H discharge hopper dims; 2HP fully enclosed motor w/brake; OAD: x 72" L x 61" W x 62" H; Approx. 1200lbs. Currently has 17 blade set-up and multiple cutting angles for dicing. 3Ph/6.4/3.2amps/50-60Hz/208-230/400-416V.

Stock# 53476002

Used Urschel Slicer, Model CC. Currently set up to run approximately 1600 lbs/hour; Stainless steel and manganese aluminum bronze contact areas; 3.75" (any dimension) max. input product size; Currently configured for strip cut; Flat cut capable; V-slice and crinkle cut blades included. Mounted on a 5x4x5 metal frame. 2 HP motor. 3/60/230/460V. Built 2002. Previously used for vegetables.