Confectionary Equipment

Used Lowe Industries C-20 Heavy-Duty 316 Stainless Steel Ribbon Blender – 20 Cubic Foot Cosmetic & Industrial Blender

Used Lowe Industries C-20 Heavy-Duty 316 Stainless Steel Ribbon Blender 20 Cubic Foot Cosmetic & Industrial Blender. Trough measures 60" long X 27' wide X 27" deep. Rotation is CCW. Serial# 787. Center discharge. Mounted on stainless steel structure with side catwalk. Built in 1992. Previously used in cosmetics.

MFR: Lowe

Used Patterson-Kelley 20 cu. ft. Stainless Steel Twin Shell “V” Blender | 3 HP Drive | Platform & Safety Fencing | Good Condition

Used Patterson-Kelley 20 cu. ft. Stainless Steel Twin Shell V" Blender | 3 HP Drive | Platform & Safety Fencing | Good Condition. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 105 lbs/cuft. The two shells measure about 31" diameter x 53" long. This unit is set up for an intensifier bar belt driven by a 5 hp motor. THE BAR ITSELF IS MISSING. There is a 7.5" discharge with a pneumatically operated butterfly valve. Overall dimensions with carbon steel stand are 116" wide x 68" deep x 112" tall. Serial # 234005. This unit comes with fence panels for a safety and a platform with a stairway. The platform is 103" wide x 83" deep x 48.5" tall to the floor. OAD of the platform with stairway are 103" w x 112" long x 91" h. Requires 230/460 vac 3 ph electrial supply. Good condition.

MFR: Patterson Kelley

Used CB Mills Batchranger Disperser – 20 HP, Air Tilt, Hoist Mounted

Used- CB Mills Batchranger Stand-Alone Hoist Mounted Disperser, Model FDD-611. Air operated tilt. Enclosed shear grid/stator and high pressure impeller. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm xp motor. Mounted on painted carbon steel hoist. Serial# 2985-0000.

Used Toshin TDS75-100MF Double Arm Dispersion Mixer – 75L Capacity, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Double Arm Dispersion Mixer, Model TDS75-100MF, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front rotor 27 rpm, rear rotor 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75kw (100hp), 3/60/480 volt, 1760 rpm motor thru a reducer no ratio. Includes an operator panel and control panel. Mounted on a base. Serial # 916. For Chewing Gum.

MFR: Toshin

Used Toshin Co. Double Arm Mixer / Hybrid Kneader - Dispersion Mixer – 75L, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Model TDS75-100MF Double Arm Dispersion Mixer, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front 27 rpm, rear 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75 kw (100 hp), 3/60/480 volt, 1760 rpm motor thru a reducer ratio 20.272 to 1. Includes an operator panel and control panel. Mounted on a base. Serial # 1298. For Chewing Gum.

MFR: Toshin

Buy Used Blue M POM-371A-2 Oven – 8.25 Cu Ft, Electrically Heated

Used- Blue M Model POM-371A-2 Oven. 8.25 Cubic feet capacity. Maximum temperature 212 degrees F (100 C). Stainless steel interior, inside dimensions measure 27" wide X 20" high X 24" deep. Electrically heated, rated for 208/240 Volts, Single phase, 60 Hz. B.O.M. NO. E3-00041. Serial# P20-312.

MFR: Blue M

Used Doyle and Roth Vertical Shell & Tube Heat Exchanger – 20.2 Sq Ft

Used- Doyle and Roth Vertical Shell and Tube Heat Exchanger, Approximate 20.2 Square Feet. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes rated 15 psi / FV at -20 to 300 degrees F. Openings: (1) 4", (2) 1", (3) .75". 40,025 BTU/H. Single pass. Baffle spacing 4.125". Side lug mounted. National Board# 20734, Serial# S1989-4, 2008. No bottom head.

MFR: Doyle & Roth

Doyle and Roth Vertical Shell and Tube Heat Exchanger. Used.

Used- Doyle and Roth Approximate 20.2 Square Feet Vertical Shell and Tube Heat Exchanger. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes rated 15 psi / FV at -20 to 300 degrees F. Openings: (1) 4", (2) 1", (3) .75". 40,025 BTU/H. Single pass. Baffle spacing 4.125". Side lug mounted. National Board# 20733, Serial# S1989-3, 2008. No bottom head.

MFR: Doyle & Roth

Doyle and Roth Shell & Tube Exchanger – 20.2 Sq Ft, Side Lug Mount

Used- Doyle and Roth Shell and Tube Vertical Heat Exchanger, Approximate 20.2 Square Feet. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes rated 15 psi / FV at -20 to 300 degrees F. Openings: (1) 4", (2) 1", (3) .75". 40,025 BTU/H. Single pass. Baffle spacing 4.125". Side lug mounted. National Board# 20732, Serial# S1989-2, 2008. No bottom head.

MFR: Doyle & Roth

Used Cherry-Burrell 200 Gallon Stainless Steel Jacketed Processor Tank – Scrape Surface Agitation

Used- Cherry-Burrell 200 Gallon Cone-Bottom Stainless Steel Jacketed Processor Tank with Scrape Surface Agitation. Vessel measures 48" diameter x 30" deep with bridge mount agitation, hinged lids, and 2-1/2" center bottom outlet with tri-clamp connection. Agitator is driven by 3 HP, 230/460V, 3/60 Hz, 1700 RPM motor thru right-angle gearbox with 85.65:1 ratio, resulting in 20 output RPM. Vessel includes self contained heating system for jacket with an electrically heated inline heater and small centrifugal circulation pump. Unitized on stainless steel frame with (4) legs. Serial number E-524-9. Previously used at dairy processing facility.

MFR: Cherry Burrell

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.

MFR: Aaron Process