Used Eden Labs Supercritical CO2 Extractor – 2000 PSI, 316SS, Fully Integrated

DOWNLOAD ALL PHOTOS FOR THIS ITEM WITHOUT AARON WATERMARK

SELL US YOURS

Stock # 52279001

Used Eden Labs CO2 Extraction System; Model 20L 2000 PSI; Extraction Vessel : Volume: 20L vessel holds up to 10 pounds of dry, ground material; maximum pressure 2000 psi (137.895 bar); maximum temperature 200F (93C); Jacket volume 4.5 Liters (1.2 gallons) 316 Stainless Steel Construction; CO2 Recirculation Pump: Flow rate: .85 Gallons per minute; Air drive piston liquid pump; In line particulate filter; all wetted parts are 316 stainless steel; Separators: (2) Separators with product collection valve; Volume: 2.5 Liters per separator; Maximum pressure 1100 psi (62.05 bar); Temperature up to 200F (93C); 316 stainless steel; Liquid Gas Separator; Tube style Heat Exchangers, 304 stainless steel; Recirculating chiller/heater, Temperature range: 4.4C to 100C (40F to 212F); 304 Stainless Steel Frame 40" L x 48" W x 60" H; Compressed Air: Energy Efficient 5 HP screw drive Chicago Pneumatic; System Requirements: Extractor Electrical 115V AC, 60 hz, 15A; Chiller/Heater Electrical 220V AC, 1 phase, 60 hz, 20A; Heaters 220V 30A single phase. 115V Standard outlet; Liquid Co2; Air Compressor 5HP Screw drive Single phase or 3 phase available

SPECIFICATIONS

Manufacturer	Eden LabsEden Labs
Model	20L 2000 PSI
Category	Cannabis EquipmentCannabis Equipment
Subcategory	Extraction & Processing EquipmentExtraction & Processing Equipment

Used Equipment Facts About This Machine

Manufacturer Information:

Manufacturer: Eden Labs
Model: 20L CO₂ Extraction System
Type: Supercritical/Subcritical CO₂ Extractor
Condition: Used – Complete, Operational Setup

Description:

Used Eden Labs 20L CO₂ Extraction System, a robust and reliable supercritical extraction system ideal for cannabis, hemp, and botanical oil processing. Features a 316 stainless steel 20L extraction vessel that holds up to 10 lbs of dry, ground material, with a maximum pressure of 2000 PSI and temperature capacity up to 200°F (93°C). Includes dual 2.5L product separators, a CO₂ recirculation pump, liquid-gas separator, tube-style stainless steel heat exchangers, and a recirculating chiller/heater with a wide temp range (4.4°C to 100°C). Operates with a 5HP Chicago Pneumatic screw air compressor, and all wetted parts are 316 stainless steel for cGMP and food-grade applications.

Specifications:

🧪 Extractor Vessel:

Volume: 20 Liters
Material Load: Up to 10 lbs of dry, ground botanical material
Max Pressure: 2000 PSI (137.9 bar)
Max Temperature: 200°F (93°C)
Jacket Volume: 4.5L (1.2 gal)
Material: 316 Stainless Steel

🔁 CO₂ Recirculation Pump:

Flow Rate: 0.85 GPM
Pump Type: Air-driven piston liquid pump
In-line particulate filter
Wetted Parts: 316 Stainless Steel

🔄 Separators (2 units):

Volume per Separator: 2.5 Liters
Max Pressure: 1100 PSI (62 bar)
Max Temp: 200°F (93°C)
Construction: 316 Stainless Steel
Features: Product collection valve

🌡 Thermal Management:

Liquid-Gas Separator
Heat Exchangers: Tube style, 304 Stainless Steel
Chiller/Heater: Recirculating, Temperature Range: 40°F to 212°F (4.4°C to 100°C)

⚙️ Air Compressor:

Type: Screw drive
Power: 5 HP
Brand: Chicago Pneumatic
Phase: Single or 3-Phase (Available options)

🔌 Electrical Requirements:

Extractor: 115V AC, 60 Hz, 15A
Chiller/Heater: 220V AC, 1 Phase, 60 Hz, 20A
Heaters: 220V, 30A, Single Phase
Additional Power: 115V standard outlet

📏 Dimensions (System Frame):

40" L x 48" W x 60" H
Frame Material: 304 Stainless Steel

Applications:

Supercritical CO₂ extraction for cannabis and hemp
Botanical oil extraction (turmeric, hops, ginger, etc.)
Terpene and essential oil separation
Nutraceutical and natural product development
Solvent-free concentrate manufacturing
GMP/cGMP and food-grade extraction labs

What products would this be used for:

Cannabis oil (THC & CBD concentrates)
Full-spectrum hemp extracts
Terpene isolates
Botanical essential oils
Crude oil for distillation
Topical and ingestible oil formulations
Vaping oil base
Natural flavoring extracts
Functional food supplements
Solvent-free botanical isolates

PRODUCT DETAILS

CO2 extractor
Eden Labs extractor
supercritical extractor
20L extractor
cannabis extractor
botanical extractor
2000 PSI extractor
stainless extractor
used extractor
oil extraction system
used Eden Labs CO2 extraction system
20L supercritical CO2 extractor
cannabis extraction equipment
CO2 extractor with chiller and separator
dual separator oil extractor
316 stainless cannabis extractor
screw drive air compressor CO2 extractor
botanical oil extraction machine
GMP compliant extractor system
Eden Labs 2000 PSI extractor
used Eden Labs 20L supercritical CO2 extractor for cannabis and hemp oil
CO2 extraction system with dual separators and recirculating chiller
fully integrated CO2 extraction skid with 2000 PSI pressure rating
cannabis extraction machine with 316 stainless steel contact parts
high efficiency CO2 extractor with 10 lb material capacity per run
GMP-ready botanical extractor with air-driven pump and 5 HP compressor
Eden Labs CO2 extraction equipment with heat exchanger and heater system
complete extraction setup with 40°F–212°F temperature control
compact footprint CO2 extractor with Chicago Pneumatic air compressor
solvent-free essential oil and terpene extractor for natural products
CO2 cannabis extractor
used CO2 extraction system
Eden Labs equipment
supercritical extraction
20L extraction vessel
cannabis oil equipment
botanical CO2 system
stainless extractor
hemp oil extractor
cannabis processing machine
buy used CO2 extractor
Eden Labs extractor for sale
cannabis extraction system used
supercritical CO2 machine buy
sell botanical extraction equipment
2000 PSI extractor used
used extraction system with chiller
10 lb batch CO2 extractor
CO2 extraction unit GMP
oil extraction machine used

Standard Terms and Conditions

FINANCING AVAILABLE

MORE INFO

APPLY NOW

We offer a variety of finance programs. Contact your sales person or Fred Fial direct for more information on our finance services available.

Fredric S. Fial, CLFP
Ascentium Capital
Work: 281.921.3883
Cell: 602.524.2196

"Dealing with Aaron is an easy and enjoyable process"

"Aaron Equipment is always my first call for used process equipment. Their inventory and customer service has ensured successful project results every time. Thanks y’all!"

"I have purchased all different types of equipment from Aaron Equipment over the last 10 years and have always been 100% happy with not only the equipment but with their customer service!"

"Working with Aaron Equipment Company was as easy as it gets."

"It is a pleasure to work with AEK and I would recommend them as an equipment supplier."

"The partnership we enjoy with Aaron has helped our business to be what it is today – thank you guys!”

"I will definitely use Aaron Equipment in the future."

"Aaron’s customer service indicates that they want long term partnerships and that is something we especially appreciate."

"I really value shopping for used equipment from Aaron Equipment Company because the information they present is accurate, their prices fair and their customer service is the best…Highly recommend."

"This is my first time using Aaron Equipment to purchase equipment. They were easy to work with and things were done quickly and efficiently. I will be a repeat customer when the need arises. This is a trustworthy company that delivers what they advertise."

"I have purchased multiple pieces of equipment through Aaron equipment over the past 15 years. The staff has been very knowledgeable on every request & have spent countless hours ensuring that the equipment I was purchasing met my expectations."

"I have been doing business with Aaron equipment for many years. This year I had the need for some used equipment in a new business Venture. I got in touch with Ryan Davies. I could not be happier with the response and honesty exhibited by him. Dealing with them was a pleasure and everything was as represented. Fair an Honest is how I would describe them."

“Aaron Equipment was very easy to get into contact with and get a price on a un-used chiller they were selling. The process was seamless and very easy on our end and we had the equipment much faster than going out for bid on it to multiple vendors and we able to come in under budget on the project.”

DESCRIPTION