Used 750 Gallon Stainless Steel Vertical Mix Tank – Dual Turbine & Emulsifier (N

Used 750 Gallon Stainless Steel Vertical Mix Tank, Stainless Steel. Approximately 58" diameter x 60" straight side. Dome Top, Dome Bottom. Top center entering emulsifying agitator, no drive. Top offset entering Dual 3 turbine agitator, no drive. Openings Top: 22" for agitator, 21" manway (no cover), 3", (4) 2", 2" side bottom outlet. 3" Center bottom outlet with 6" discharge height. Mounted on (4) stainless steel legs.

Used Caterpillar 3508 Diesel Generator | 750 kW Industrial Power Generation Unit

Used- Caterpillar Model 3508 Diesel Generator. Open skid unit. Rated 750kW 23Z02373 3508STD 1025 hours 10wire No control panel No breaker 480 Volt 1128 Amp 60 Hertz.

MFR: Caterpillar

Used Circleville Metal Works 750 Gallon 304 Stainless Steel Mix Tank | Anchor Agitator | 5 HP Motor | Dished Top & Bottom

Used- Circleville Metal Works Inc. approximately 750 gallon Mix Tank. 304 stainless steel vertical 60" diameter X 60" high straight side. Internal rated 0.25 PSI @ 212 F. S/N CMW-940. Dished top and bottom. Top fittings: 20" manway, (2) 1.5", (2) 2", (3) 3", and (1) 4". 2" center bottom drain. Equipped with anchor style agitator driven by Philadelphia right-angle drive Model MT04. S/N 508380 rated 1750 RPM input, 84 RPM output. Powered by 5HP 3/60/230-460 volt motor. Mounted on (4) legs giving 27" clearance. Built 1975.

MFR: Circleville Metal

Used 7,500 Gallon Alloy Fabricators 316L Stainless Steel Vertical Storage Tank with Side Manway

Used-7,500 Gallon Alloy Fabricators Stainless Steel Tank. 316L Stainless steel. Approximately 10' diameter x 155'' tall. Side manway. Flat top.

MFR: Alloy Fab

Used 7,500 Gallon Alloy Fabricators 304L Stainless Steel Vertical Storage Tank

Used 7,500 Gallon Alloy Fabricators 304L Stainless Steel Vertical Storage Tank. Approximately 12' diameter x 9' tall. Flat top. Built 1995.

MFR: Alloy Fab

Unused Watson Metal Masters 7,500 Gallon 304 Stainless Steel Tank – 122" Diameter x 153" Straight Side – Built 2021

Unused Watson Metal Masters 304 Stainless Steel Construction Tank, 7,500 Gallon. Approximately 122" diameter x 153" straight side. Dome top, flat bottom. Rated Atmos at 100 F internal. 20" side bottom manway. Approximately 170" OAH. Serial 7067-1. Built 2021.

MFR: Watson

Unused Watson Metal Masters 7,500 Gallon 304 Stainless Steel Tank – 304 SS – Built 2021 – Atmospheric Storage Vessel

Unused Watson Metal Masters 7,500 Gallon 304 Stainless Steel Tank 304 SS Built 2021 Atmospheric Storage Vessel. Approximately 122" diameter x 153" straight side. Dome top, flat bottom. Rated Atmos at 100 F internal. 20" side bottom manway. Approximately 170" OAH. Serial 7068-1.

MFR: Watson

Used CE Howard 7,500 Gallon Stainless Steel Jacketed Tank – 304 SS

Used- CE Howard 7,500 Gallon Stainless Steel Jacketed Tank, 304 stainless steel, measures 118" diameter x 162" straight side with dome top and flat bottom. Unit has dimple jacket wrapped around bottom section of tank, 48" high, rated for 85 PSI at 300 degrees Fahrenheit to negative 20 degrees Fahrenheit. Includes (1) 4" diameter side bottom outlet, (2) 2" top ports and (3) 3" top ports with 22" x 10" manhole.

MFR: C E Howard

Used Mueller 7,500 Gallon Jacketed Pressure Tank | 30,000 Liter Stainless Steel Fermentation Vessel

Used Mueller 7,500 Gallon Jacketed Pressure Tank, approximately 30,000 liter capacity, Model F, constructed of 304 stainless steel with a vertical design featuring a dish top and cone bottom. Overall dimensions are approximately 10' 2 5/16" outside diameter x 22' 3 1/2" overall height. The vessel is rated for 25 psi internal pressure at 100 F, with a jacket rated for 100 psi at 100 F. Manufactured in 2008, Serial #384634-2. Previously used in beer brewing.

MFR: Mueller Corp

Used 7,600 Gallon 316L Stainless Steel Vertical Storage Tank with Side Manway & Bottom Outlet

Used-7,600 Gallon Vertical Stainless Steel Tank. 316L Stainless steel. Approximately 10' diameter x 13' tall. Side manway. Side bottom outlet.

Unused Tarmac Int. Inc. Heat Exchanger – 768 Sq. Ft., 1.8 MMBTU/H, Stainless Steel

Unused- Tarmac Int. Inc Heat Exchanger, (Never set up on the Hot side). Model 48-30DPL48-0.625-IU. 768 sqft. Stainless steel. Size: 48"*48"*54.25, CFM: 8100 CFM. Material: High temperature SST, Surface area: 768 Ft square. Total heat transfer rate: 1.8 MMBTU/Hour. Type: Plate/plate heat exchanger. Max Temp Hot Gas Inlet: 662 F. Efficient: 64.3%. Suitable to handle particulate gases from solid combustion and also applicable in clean combustion Outlet temp hot side: 249F , 11 GA. 304 S.S. casing with 18 GA. 304 S.S. expansion joints at 3 connections, 12 Ga. C.S. cladding with 3 x 3 x C S flanges primed and painted. STRUCTURAL STAND EQUAL TO OR LESS THAN 5 HEAT EXCHANGER ELEVATION. Year 2021. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations

Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.

MFR: Smithco Engineering