Buy Used 6" PFA Jacketed Column – Heat Transfer & Corrosion Protection

Used- 6" PFA lined column, jacketed.

MFR: Unknown

Used Stewart Bolling 6" x 12" Pilot Two Roll Rubber Mixing Mill

Used Stewart Bolling 6" x 12" Pilot Scale Two Roll Mixing Mill With 5 HP Gear Motor. Designed for laboratory, pilot plant and small-batch processing of compatible rubber, plastic and polymer compounds. Features (2) chrome-cored rolls measuring approximately 6" diameter x 12" long, driven by a 5 HP single-speed gear motor with a fixed gear ratio. Equipped with two-point manual roll gap adjustment for controlling material thickness and split end guides for containing material within the working roll area. Safety features include front and rear knee-operated safety mechanisms and an over-the-roll safety cage. Electrical requirements are 220/440 volts, 3-phase, 60 Hz. Serial #2560. Possible applications include rubber compounding, polymer blending, plastic material processing, sheeting, mastication and mixing of compatible natural rubber, synthetic rubber, elastomers, thermoplastic compounds, pigments, fillers and other suitable rubber or polymer formulations.

MFR: Stewart Bolling

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation. Stainless Steel. Main drive motor 7.5 hp 3/60/230-460 volts, fixed speed. Backdrive motor2 hp 3/60/208 230-460 volts fixed speed. 6000 rpm max speed, 95:1 gearbox. Mounted on table with vibration isolators.

MFR: Sharples

Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI

Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.

MFR: Vulcan

Lodige FKM600D Plow Mixer

Used- Lodige Model FKM600D batch-type plow mixer with 6 cubic feet working capacity and 10 cubic feet total capacity. 304 stainless steel, non-jacketed mixing chamber approximately 32" diameter x 50" long with 4" diameter shaft, (3) bolt-on plows, (2) bolt-on end scrapers, (2) 18" x 15-1/2" side access doors, and (2) 12" top openings. 9" x 7" bottom outlet with manually operated door and air-purge seals. Serial # 9046. Driven by an approximately 10 hp motor through Falk reducer. Includes control panel with Allen-Bradley PanelView 600 and SLC 5/04 CPU. Mounted on carbon steel stand. Suitable for dry powders, premixes, granular ingredients, spices, nutraceuticals, feed additives, chemical blends, and similar products.

MFR: Lodige

Industrial Used Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying

Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air temperature 250 degrees F. Built 2017. Last ran wet coffee grounds.

MFR: Belt-O-Matic

Used Cumberland Quietizer Model 6 Plastic Pelletizer with 10 HP Drive

Used Cumberland Quietizer Model 6 Industrial Pelletizer With 10 HP Variable Speed Drive. Designed for cutting and pelletizing compatible plastic and polymer materials. Features an approximately 6-5/8" long x 8" diameter cutting rotor with a 16-blade configuration and (8) blades installed. Equipped with an approximately 3" diameter rubber feed roll for feeding material into the cutting assembly. Driven by a 10 HP variable-speed gear motor rated at 1,745 RPM, operating on 230/460 volts, 3-phase, 60 Hz electrical service. Unit is mounted on a painted carbon steel support frame. Serial #326050-B-85005. Possible applications include pelletizing, cutting and size reduction of compatible plastic strands, extruded polymer materials, thermoplastic compounds and other suitable plastic processing materials.

MFR: Cumberland

Used Leistritz ZSE 60 MAXX-36D Twin Screw Extrusion Line with Pelletizing System – 495 kW Drive – Auction Asset

Used Leistritz ZSE 60 MAXX-36D Twin Screw Extrusion Line with Pelletizing System 495 kW Drive Auction Asset. Line consists of (1) Koch Technik Feeding System & Scholz Dosiertechnik Dosing unit, (1) Leistritz Twin Screw Extruder, Type ZSE 60 MAXX-36D. (2) 60 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM. Flender Gearbox is direct driven via a 742 HP/495 kW 400volt/50cycle/3Ph motor. Free standing control panel with microprocessor and interconnecting wiring. Built in 2014 Serial# 04489, (1) BD Plast Double Screen Changer, type BDL, (1) Ettinger ERF 200 melt pump, Waterbath incl 2 siflers, Stainless steel, on legs, (1) ECON Pelletizer, type EUP 600, New 2014, (1) Tredkamp Mixing Silo, type 1C-T, Stainless steel, Volumen 10 m3. New 2007, (1) Moton Mixing Silo 14 m3 volume. on legs, control panel incl. elevator, (1) Big Bag System. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will added to the purchasing price.

MFR: Leistritz Corporation

Used Noris ZSC 60 Twin Screw Extrusion Line – 650-800 kg/hr Polymer Compounding System

Used- Noris ZSC 60 Twin Screw Extrusion line with a capacity of 650 800 kgs/hr. consisting of: Noris ZSC 60 Twin Screw Extruder, (2) 60 mm diameter screws, 40:1 L/D ratio, co-rotating inter-meshing side by side screw design, (9) heated barrels, electrically heated water cooled. Driven by a 400volt drive motor via a PIV gear box, screw speed maximum 746 RPM, (1) Ettinger Melt Pump, type ERF 200, (1) Stainless Steel Water Bath, (1) Pelletizer, (1) Control panel. Incl. additional infrastructure. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.

Used Leistritz ZSE 60 MAXX-44D Twin Screw Extruder – 60 mm Co-Rotating Extruder – Built 2018

Used- Leistritz Twin Screw Extruder, Type ZSE 60 MAXX-44D. (2) 60 mm) diameter screws. 44:1 L/D Ratio. Co-rotating. 10-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM via a Flender Gearbox is direct driven via a 400volt/50cycle/3Ph motor. Incl. control panel. Built in 2018. Serial# 04977. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.

MFR: Leistritz Corporation

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011, SN 4064, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

Used O’Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower

Used O'Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower, SN 4063, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara