Used American Process Systems Forberg Fluidized Zone Mixer – 35 Cu. Ft. Stainless Steel

Used- American Process Systems Forberg Fluidized Zone Mixer, Model FZM-35, 35 Cubic Feet Working Capacity, 304 Stainless Steel. Non-jacketed chamber approximate 58" long x 67" wide. (2) 4" Diameter shafts with (16) paddles per shaft, paddles 11-9/16" wide x 3/8" thick welded to 1-1/2" diameter posts. Driven by 30 hp, 3/60/208-230/460 volt, 1760 rpm motor with 30.05:1 gearbox ratio. (2) 20" x 20" side access doors, (2) 9" x 57" Bombay door style outlets. Includes stainless steel stand, Bag Dump Station. Serial# F1041. Last used for Cereal / Food Product. Great alternative for Ribbon and Paddle Mixer.

MFR: American Process Systems

IN STOCK& NEW- Paul O. Abbe, Model RB-35 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe, Model RB-35 Ribbon Blender. In -Stock .35 Cubic Foot working capacity. 39 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 33.4" wide x 59.1" long x 37.4" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 25 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 42 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 19.7" wide x 31.5" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 24" discharge height. Approximate weight 2,860 pounds. Approximate overall dimensions: 52.7" wide x 107.5" long x 84.3" high. Controls are available upon request.

MFR: Paul O Abbe

Karl Schnell Dual Ribbon Blender, type 740 Schraubenwellen

Used- Karl Schnell Dual Ribbon Blender, type 740 Schraubenwellen. Stainless steel construction. Total capacity approx. 35.3 Cu. Ft (1000 liter), working capacity 26.48 cu. Ft (750 liter) dependent on product density. (2) Double ribbons; (2) End outlets. (1) Hydraulic operated top cover. (2) 4,4 / 5,5 kW 400 Volt - 50 cycle - n1: 1420 / n2: 39 / n1: 2860 / n2: 78 rpm 1090 / 675 Nm. motors. Incl. control panel (mounted on mixer). Previously used in a cheese application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Karl Schnell

Used Lleal AME-2600 SF-H Double Sigma Extruder Kneader | 350 Gal Working | Vacuu

Used- Lleal Model AME-2600 SF-H Double Sigma Extruder Kneader, 316 Stainless Steel. Useful volume 350 gallon, total volume 2,600 liter (680 gallon). Vacuum Rated 356 degrees F at 60psi. Sigma blades. Hydraulically driven. Driven by a 300 hp motor. Serial# 14162. Includes Rexroth hydraulic Skid Order# 14/250391. Includes Control panel.

Buy Used Generac 350kW Standby Generator – 800A Breaker, Only 277 Hours

Used Generac 350 kW Standby Diesel Generator Set, Model SD0350-G36160D18GPSY, Mitsubishi 16L engine rated at 1800 RPM, Serial# 0A8829. Unit configured for 3/60/120/208V, 12 lead reconnectable to other voltages. 800 Amp main-line circuit breaker. Generac digital control panel. 24 Volt DC Battery Charger. Sound attenuated enclosure. 706 gallon UL listed sub-base fuel tank with secondary containment. 277 Hours. Serial# 2089404, Built 2006. Overall dimensions 200"L x 58"W x 118"T.

MFR: Generac

Used Ingersoll-Rand H300 Skid-Mounted Rotary Screw Air Compressor – 1264 CFM, 350 HP, Built 2014

Used Ingersoll-Rand H300 Skid-Mounted Rotary Screw Air Compressor 1264 CFM, 350 HP, Built 2014. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours.

MFR: Ingersoll-Rand

Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor – 1264 CFM, 350 HP Skid Mounted System

Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor 1264 CFM, 350 HP Skid Mounted System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.

MFR: Ingersoll-Rand

Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor – 350 HP, 1264 CFM Plant Air System

Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor 350 HP, 1264 CFM Plant Air System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.

MFR: Ingersoll-Rand

Used 2020 Caterpillar D3506C 350 kW Diesel Generator Set

Used 2020 Caterpillar 350 kW diesel generator set, model D3506C, powered by a CAT C13 diesel engine, serial number PW30188. Generator operates at 1800 RPM and is rated for 3-phase, 60 Hz, 480V electrical service. Unit has 779 operating hours and is equipped with a weather enclosure and sub-base fuel tank. Possible applications and suitable uses include standby or backup electrical power for industrial plants, manufacturing facilities, warehouses, commercial buildings, and other 480V 3-phase operations. Built 2020.

MFR: Caterpillar

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel. 7'9" D x 12' OAH. Dome top, sloped bottom. Side manhole. Side discharge outlet. Side-mounted agitator. Has CIP sprayball. Inlets at top of tank. On stainless steel legs. Previously used in a beverage application.

Used Crepaco 3500-Gallon Stainless Steel Tank – Vertical for Sale

Used- Crepaco 3,500-gallon vertical tank constructed of 304 stainless steel, measuring approximately 96" diameter x 118" straight side. Tank features a dished top with dent, coned bottom, fixed stainless steel agitator bridge, (1) internal baffle, and (1) spray ball. Top openings include (2) 1-1/2" openings, (1) 2-1/2" opening, (1) 4" drive opening, and (1) 12" manway with cover. Side includes (1) 20" x 16" oval manway with cover, with a 2" center bottom outlet for product discharge. Tank is supported by (6) stainless steel legs. Serial #C6934, Built 2000. Possible applications and suitable products include beverage batching, liquid food storage, ingredient blending, chemical intermediates, wash-water/CIP storage, and non-pressure bulk liquid storage.

MFR: Crepaco

Used Prodex / Henschel High-Intensity Mixer – Model 35JSS

Used Prodex / Henschel High-Intensity Mixer Model 35JSS. Carbon steel jacketed bowl with 304 stainless steel Interior. Approximate working capacity 100 Liters or 3.5 Cubic Feet (Total Capacity: 150 Liters or 5 Cubic Feet). Measures 24" diameter x 24" deep with 2-tier blades, 8" side bottom outlet with air actuated discharge and hinged top cover. Driven by 32/16 HP, 220V, 3-phase, 60 Hz, 3450/1790 RPM two-speed motor. Serial# 820786.

MFR: Prodex