Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder – Compact Pilot Compounding System

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder Compact Pilot Compounding System. 30 KG (66 lbs) per hour. (2) 30 mm diameter side by side screws, 10:1 L/D ratio. Electrically heated water cooled barrel. Driven by a 4 kw (5.36hp) -440-volt AC drive motor via a gear box. Screw speed maximum 161 RPM. Frame mounted on 4 wheels. K-Tron T22 twin screw feeder. Control panel mounted on extruder. Weight approx. 400 kgs. Extruder: 1800 mm L x 800 mm W x 2200 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: APV

Used This disperser has two (2) stainless steel shafts that measure 62" and 68" long with a blade diameter of 18". Each shaft is driven by a 60/30 hp, 1780/890 rpm motor that requires 440 vac, 3 ph e...

Used-This disperser has two (2) stainless steel shafts that measure 62" and 68" long with a blade diameter of 18". Each shaft is driven by a 60/30 hp, 1780/890 rpm motor that requires 440 vac, 3 ph electricity. Unit is equipped with an air over oil lift. Rated for hazardous locations.

Used Granutec plastic granulator model 1216PG-30. The serial number is 302-3795. The throat is 11" by 11". It has 7 knives. The motor is 30 hp and requires 230/460 vac 3 ph and goes 1760 rpm. On cast...

Used-Granutec plastic granulator model 1216PG-30. The serial number is 302-3795. The throat is 11" by 11". It has 7 knives. The motor is 30 hp and requires 230/460 vac 3 ph and goes 1760 rpm. On casters.

MFR: Granutec

Used SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit i...

Used-SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp electric motor. 575 vac 3 ph power required.

MFR: SPX

Used 30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body...

Used-30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body flange. Glass Col 9 circuit electric jacket heat with 9 each 1,650 circuits. One 3" 300# RFSO with sight glass, one 3" 300# pad flange, three 2" 300# RFSO flnges, one 1" 3000# coupling, one 1" flush mount bottom ball valve., three 3000# couplings, and three 1/2" 3000# couplings. Tank on a stand. Material 316 stainless steel. ASME "U" stamped. National Board Number1759. Internal welds has #3 polish.

Used Coaire CAS30S24 30 HP Rotary Screw Air Compressor With Schulz Dryer

Used Coaire Model CAS30S24 oil-injected, fixed-speed rotary screw air compressor, Serial #SS030HG187, with Schulz Model ADS 125 non-cycling refrigerated compressed air dryer, Serial #210009427. The Coaire CAS S-Series is a fixed-speed industrial rotary screw compressor line featuring a high-efficiency motor and cooler with direct or gear drive. The CAS030S is rated at 30 HP, with published S-Series capacities ranging from 127 CFM at 100 psi, 124 CFM at 125 psi, and 111 CFM at 150 psi depending on configuration. Included Schulz ADS 125 refrigerated air dryer has a nominal capacity of 125 SCFM, 1-1/4" NPT-F inlet/outlet connections, 115V/1-phase/60 Hz electrical service, and an 88 lb net weight. The dryer is designed to remove moisture from compressed air before it reaches downstream equipment.

MFR: Coair

Used Quadro Comil Model 198 Stainless Steel Conical Mill – 30 HP

Used Quadro Comil Model 198 Stainless Steel Conical Screen Mill With 30 HP Drive, Built 2024. High-capacity industrial milling and particle size reduction system designed for controlled grinding, deagglomeration, delumping and sizing of compatible dry powders, granules and bulk solid materials. Rated for processing capacities up to 16,000 lbs per hour, depending on product characteristics, screen configuration and application. Features 304 stainless steel construction with 316 stainless steel impeller and screens for product processing. Operates at speeds ranging from approximately 200 to 900 RPM, providing flexibility for different material processing requirements and particle size specifications. Driven by a 30 HP WEG motor operating on 230/460 volts, 3-phase, 60 Hz electrical service. Serial #1980262. Manufactured in 2024. Possible applications include dry powder milling, granule sizing, deagglomeration, particle size reduction and processing of compatible pharmaceutical powders, nutraceutical ingredients, food powders, sugar, salt, starch, powdered chemicals, mineral powders, pigments, polymer additives and other suitable dry bulk solids.

MFR: Quadro

Stainless Steel Seasoning Drum – 30" x 44" Industrial Tumbler

Used- Stainless Steel Seasoning Drum. Approximate 30" diameter x 27" long straight side x 44" total length. (8) Internal flights. Has adjustable pitch. 20" Inlet, 23" outlet. Driven by 1/2hp, 90 volt, 1750 rpm motor. Control panel with variable speed adjustment. Mounted on stainless steel frame with casters. 120 Volt.

Used Stainless Steel Flavoring Drum with Adjustable Pitch & Control Panel

Used Seasoning Drum, Stainless Steel, Approximate 30" diameter x 27" long straight side x 44" total length. (8) Internal flights. Has adjustable pitch. 20" Inlet, 23" outlet. Driven by 1/2hp, 90 volt, 1750 rpm motor. Control panel with variable speed adjustment. Mounted on stainless steel frame with casters. 120 Volt.

Industrial Stainless Steel Seasoning Tumbler for Snacks & Food Processing

Used Approximate 30" Diameter Stainless Steel Seasoning Drum. 27" Long straight side x 44" total length. (8) Internal flights. Has adjustable pitch. 20" Inlet, 23" outlet. Driven by 1/2hp, 90 volt, 1750 rpm motor. Control panel with variable speed adjustment. Mounted on stainless steel frame with casters. 120 Volt.

Used CMS Heat Transfer 30.3 Sq Ft 304L Stainless Steel Shell and Tube Heat Exchanger, Naphthalene Cooler

Used CMS Heat Transfer Division 30.3 Square Foot 304L Stainless Steel Horizontal Shell And Tube Heat Exchanger With 190 PSI Pressure Rating. Industrial shell and tube heat exchanger designed for liquid-to-liquid heat transfer, process cooling and industrial temperature control applications. Features approximately 30.3 square feet of heat transfer surface area with (12) straight tubes constructed of 304L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 304L stainless steel and rated for a maximum allowable working pressure of 190 psi and full vacuum at temperatures ranging from -20 F to 400 F. Process connections include (2) 3" shell-side openings, (2) 3" tube-side openings and (4) 3/4" auxiliary nozzles. Originally designed as a naphthalene final cooler, Equipment Tag E-626. Manufactured by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #3194.8. National Board #2251. Possible applications include industrial process cooling, naphthalene cooling, chemical processing, liquid-to-liquid heat exchange, solvent cooling, circulating water systems, heat recovery and temperature control of other compatible chemical and industrial process fluids.

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech