Used SPX Waukesha CMP Colloid Mill | Stainless Steel High Shear Milling System

Used- SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp electric motor. 575 vac 3 ph power required.

MFR: SPX

Used Waukesha MS Colloid Mill | Stainless Steel High Shear Milling System

Used Waukesha MS Colloid Mill | Stainless Steel High Shear Milling System. Serial number 1000002790489. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp, 3530 rpm electric motor. 460 vac 3 ph power required.

MFR: Waukesha

Used Hoffland 25 Cu Ft Air/Hydraulic Filter Press | 50 Plate 800mm Dewatering System

Used- Hoffland Air/Hydraulic Filter Press, 25 Cubic Foot. (50) 800mm plates. Gasketed. CPVC Flanged Outlets. 169" Between Legs. OAD: 221"L x 42"W x 66"H.

MFR: Hoffland

25 HP Industrial Blower by IATC – 18,000 CFM, Model BISW 365-79 CL2/B

Used- Industrial Air Technology Corp. Blower, Model BISW 365-79 CL2/B 360 CW. 18000 CFM, Serial # 60531-A. Driven by a 25 HP, 3/60/208-230/480V, 1180 RPM motor.

Carver AutoPellet Press - 25 Ton Force, 5” Diameter Platen, 13MM Die

Used- Carver AutoPellet Press, Model 3887.1SD0A06. 25 Ton maximum clamp force. 5" Diameter platen. 13MM Die. Ram stroke 1". Daylight opening 1.5 to 7.25". Mounted on a base. Serial# 110497, Built 2011.

MFR: Carver

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.

MFR: Fitzpatrick

Used Alfa Laval NX-6541 "SanX" Solid Bowl Decanter Centrifuge – Built 2020

Used- Alfa Laval NX-6541 "Sanx" solid bowl decanter centrifuge, SanX model, stainless steel construction (product contact areas), max bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor , base, casing, gearbox 127/1 ratio, 75 hp main drive motor, 30 hp backdrive motor, control (460/3/60). Built 2020

MFR: Alfa Laval

Used Roark Enterprises 25-Gallon Stainless Steel Receiver Tank – 150 PSI, Vacuum Rated

Used- Roark Enterprises 25 Gallon Receiver Tank, Stainless Steel Construction. Approximately 16" diameter x 32" straight side, dish top and bottom. Internal rated 150 psi and full vacuum at 150 degrees F. Serial# 95.709.ME1, National Board# 460.

MFR: Roark Enterprises

Used JWI 800N32-49-25SYLS Filter Press – 49 Chamber, 528 Sq. Ft., 800mm Plates (

Used- JWI Filter Press, Model 800N32-49-25SYLS. Total chamber volume of 25 ft (0.707 m) across 49 chambers. It features a chamber volume of 0.5 ft (0.01 m) and a total filter area of 528 ft (49 m), using 800 mm square plates with Goretex filter cloth. Approximately (49) polypropylene Plates. The overall length and width of the press are 218.63 inches (5553 mm) and 53.29 inches (1354 mm), respectively. The press uses an air-powered hydraulic pump and requires a maximum air supply of 80 scfm at 100 psi. It is equipped with a 6" bore x 24" stroke (152 mm x 610 mm) hydraulic cylinder, with a maximum hydraulic closing pressure of 4100 psi (283 bar). The system includes a 4.5-gallon (17.0 L) reservoir and uses Rykon All Weather Type-46 hydraulic oil. The feed pump pressure is rated at 100 psi, and the manifold style is air blow with precoating capability. Optional features include an auto pump control system, semi-auto shifter, drum disposal system, and Bombay doors. Serial# F05045. This unit was new in 2017. ** PLATES ARE STORED INSIDE**

MFR: JWI

Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022

Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022. Rated 25kW. 42.5kW (approx. 56 HP) at 3600 RPM. Meccalte model ECP28 L4 alternator. On casters. OAD: 60" x 30" W x 52" H.

Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Si

Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Sigma Control 2. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 39,567 run hours and 30,258 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1125, built 2012.

MFR: Kaiser

Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 H

Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 HP | 112 CFM. Rated for 125 PSIG at 112 CFM. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 42,000 run hours and 33,000 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1124, built 2012.

MFR: Kaiser