Used IKA Works High Shear Mixer / Homogenizer – Stainless Steel, 20 HP

Used- IKA Works Mixer/Homogenizer Model DR 2000/10. Approximately 7-1/2" diameter x 6" deep chamber. Missing internals. Top bolt on cover with 2" diameter tri-clamp opening, 2" side bottom outlet. Driven by a 20hp 3/60/575V, 3537 rpm motor. Mounted Aerni Pressure Vessel, Model AR 139 rated for 26bar (377psi) at -70 to 200 degrees C (-94 to 392 degrees F). No Manufacturers tag, frame mounted.

MFR: IKA Works

Used Trane CGAM 020F 20-Ton Air-Cooled Chiller with Electric Heat Air Handler

Used Trane Model CGAM 020F High-Efficiency 20-Ton Air-Cooled Scroll Liquid Chiller With Dual 5 HP Pumps And Trane Performance Climate Changer Air Handler. Industrial and commercial chilled water cooling system designed for building air conditioning, HVAC and process cooling applications. Rated for approximately 20 tons of cooling capacity (240,000 BTU/hour). Utilizes R-410A refrigerant with an approximate 45 lb refrigerant charge and features an air-cooled condenser with lanced aluminum fins for efficient heat transfer. Refrigeration system has a high-side design pressure of 650 psi and low-side design pressure of 238 psi. Equipped with (2) 5 HP circulation pumps for chilled water distribution. Electrical requirements are 460 volts, 3-phase, 60 Hz. UL listed. Includes Trane Model CSAA006UBL00 Performance Climate Changer air handler with electric heating coil section rated at 17.5 kW, requiring 460 volts, 3-phase, 60 Hz electrical service, and a maximum output air temperature of 104 F. Chiller Serial #U21M04243. Full chiller model configuration: CGAM 020F 2W03 AXD2 A1A1 B1AX XA1C 1A4X XX8B 1A1A 3A1D 1XXC XX. Possible applications include commercial building air conditioning, chilled water HVAC systems, industrial process cooling, manufacturing equipment cooling, food and beverage processing, plastics manufacturing, pharmaceutical facilities and other compatible commercial or industrial applications requiring chilled water cooling and air handling.

MFR: Trane Co

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator. Rated 125 psig. 97.2 CFM. 20 HP, 3/60/460V. With SPVG 120 gallon vertical air receiver Tank; Mikropor Model MK-US-125 Digital 125 SCFM air dryer; and Clean Resources Model IDC Pak Series oil water separator. 32,211 hours. Built 2010.

MFR: Quincy

Used Gifford-Wood W750H High Shear Colloid Mill – 20 HP, 3,500 RPM Cart-Mounted Processing System

Used- Gifford-Wood High Shear Colloid Mill, Model W750H. Powered by a 20 HP, 3500 RPM, 3/60/230-460V Pacemaker motor. With control panel. Mounted on cart.

Used Shred-Tech model ST-50 2-shaft shredder. It has an approximately 3.4 cu.ft. feed hopper with a hydrualic ram feed system. Hydraulic power unit is missing. Unit has control panels. Shredder has 2...

Used-Shred-Tech model ST-50 2-shaft shredder. It has an approximately 3.4 cu.ft. feed hopper with a hydrualic ram feed system. Hydraulic power unit is missing. Unit has control panels. Shredder has 21" x 40" cutting chamber with (48) 10" diameter knives. Driven by (2) 20 hp 1750 rpm motors requiring 230/460 vac 3 ph electricity. Blades are .75" wide.

MFR: Shred-Tech

Used Patterson-Kelley 20 cuft stainless steel twin shell "V" blender. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 10...

Used-Patterson-Kelley 20 cuft stainless steel twin shell "V" blender. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 105 lbs/cuft. The two shells measure about 31" diameter x 53" long. This unit is set up for an intensifier bar belt driven by a 5 hp motor. THE BAR ITSELF IS MISSING. There is a 7.5" discharge with a pneumatically operated butterfly valve. Overall dimensions with carbon steel stand are 116" wide x 68" deep x 112" tall. Serial # 234005. This unit comes with fence panels for a safety and a platform with a stairway. The platform is 103" wide x 83" deep x 48.5" tall to the floor. OAD of the platform with stairway are 103" w x 112" long x 91" h. Requires 230/460 vac 3 ph electrial supply. Good condition.

MFR: Patterson Kelley

Used Cowles model 720 VH disperser has a stainless steel shaft length of 50" and a blade diameter of 14". Unit is equipped with an air over oil lift. Driven by a 40/20 hp motor that runs1750/870 rpm ...

Used-Cowles model 720 VH disperser has a stainless steel shaft length of 50" and a blade diameter of 14". Unit is equipped with an air over oil lift. Driven by a 40/20 hp motor that runs1750/870 rpm and requires 220 vac, 3 ph electricity. The motor is tagged for hazardous location however the junction box attached to the motor does not appear to be. Serial no. 720 C46 Overall dimensions are approximately 54" w x 94" l x 78" h.

MFR: Cowles

Used This Cowles disperser has a stainless steel shaft length of 52" and a blade diameter 14". Unit is equipped with an air over oil lift. Driven by a 40/20 hp, 1800/900 rpm motor that requires 230 v...

Used-This Cowles disperser has a stainless steel shaft length of 52" and a blade diameter 14". Unit is equipped with an air over oil lift. Driven by a 40/20 hp, 1800/900 rpm motor that requires 230 vac, 3 ph electricity. Overall dimensions are approximately 54" w x 90" l x 80" h.

MFR: Cowles

Used 20"dia. x 12" deep Tolhurst center slung perperated basket centrifuge. Solid bottom. Sight glass in the lid. Tripod suspension. V belt drive. 1600 rpm. On casters. Driven by a 5 hp 230/460 vac ...

Used-20"dia. x 12" deep Tolhurst center slung perperated basket centrifuge. Solid bottom. Sight glass in the lid. Tripod suspension. V belt drive. 1600 rpm. On casters. Driven by a 5 hp 230/460 vac 3 ph motor that is tagged for hazarous locations. Serial number T-71879.

MFR: Tolhurst

Used Progressive Industries, Inc model MS-20 air classifier only. Carbon steel construction. For particles 3 microns down to 0.4 micron average diameter. It can handel feed rates of 1 ton to 20 tons ...

Used-Progressive Industries, Inc model MS-20 air classifier only. Carbon steel construction. For particles 3 microns down to 0.4 micron average diameter. It can handel feed rates of 1 ton to 20 tons per hour. The diameter of the chamber is 46" and the overall length is about 119". The rotor is driven by a 20 hp, 230/460 vac 3 ph electric motor. This unit is for air classifing after milling. Serial # 88 14.

Used Hi Speed Disperser has two 50" stainless steel shafts with two 8" diameter blades on each. Unit is equipped with an air over oil lift. Variable speed. Driven by a 20 hp, 1755 rpm motor that re...

Used-Hi Speed Disperser has two 50" stainless steel shafts with two 8" diameter blades on each. Unit is equipped with an air over oil lift. Variable speed. Driven by a 20 hp, 1755 rpm motor that requires 230/460 vac, 3 ph electricity. Overall dimensions are approximately 32" w x 80" l x 80" h. Motor is tagged for hazardous location.

Buy Used Blue M POM-371A-2 Oven – 8.25 Cu Ft, Electrically Heated

Used- Blue M Model POM-371A-2 Oven. 8.25 Cubic feet capacity. Maximum temperature 212 degrees F (100 C). Stainless steel interior, inside dimensions measure 27" wide X 20" high X 24" deep. Electrically heated, rated for 208/240 Volts, Single phase, 60 Hz. B.O.M. NO. E3-00041. Serial# P20-312.

MFR: Blue M