Used Union Process 1-SDG Attritor - 3 HP XP Motor, 3/230/460V

Used- Union Process Szegvari 1-S Series Laboratory Attritor, Model 1SDG. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 7-1/2" diameter x 7-1/4" deep, 1" diamater shaft with 1/2" posts. Driven by a 3hp, 3/230/460 volt, 1170 rpm xp motor, thru Reeves adjustable speed gearbox. Mounted on painted carbon steel frame. Serial# 891103.

Used Szegvari Lab Attritor - 8” Dia x 8.25” Deep Jacketed Bowl

Used- Union Process 1-S Series , Type B Laboratory Attritor. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 8" diameter x 8-1/4" deep. Missing agitation shaft. Driven by a 3hp, 3/208-230/460 volt, 1725 rpm xp motor, thru Reeves adjustable speed gearbox. Mounted on painted carbon steel frame.

Used Union Process Attritor - Ceramic Lined, 3 HP XP Motor

Used- Union Process Szegvari Attritor. Approximate 8" diameter x 7-1/2" deep ceramic lined jacketed bowl. Mixing agitator approximate 1" diameter shaft, with (4) 1/2" diameter posts. Driven by reeves variable speed motodrive with 3hp, 3/60/230/460 volt, 1170 rpm XP motor. Mounted on carbon steel frame. no manufacturers tag.

Unused- Caterpillar Cogeneration Natural Gas Generator System, 1.5 MW.

Unused- Caterpillar Cogeneration Natural Gas Generator System, 1.5 MW, Permanent. Caterpillar Model CG170-16 Natural Gas Engine Rated at 1556 kW, 4160 V, 3 Phase, 60 Hz at 0.8 Power Factor. Pritchard Brown Enclosure, Cannon Boiler, Boulden Radiator, WHR System, Stueler SCR System to be Installed Outside of the Enclosure, Caterpillar ISO Auxiliary Cabinet. Built 2017.80 hours of Engineering Support to site at customers location. U.S.A. locations only.

MFR: Caterpillar

Used Shanghai Junyu JYC-500 Coating Drum for Sale – Stainless Steel, 1.5 HP Moto

Used Shanghai Junyu Food Machine Co., Lt Coating Drum, Model JYC-500, Stainless Steel. Approximately 40" diameter x 62" long. Driven by a 1.1kW (1.5hp), 1400rpm motor. Approximate 1-3/4" tall flights with 10" spacing. 19-1/2" infeed and outfeed. Control panel with Delta MS-300 drive. Mounted on a stainless steel frame. 3/60/220 Volt.

Used Great Lakes Air GN2-1800C11-XP2 Nitrogen Generator System – 3,745 SCFH, 99.5% Purity with Air Dryer & Tanks

Used- Great Lakes Air Package Nitrogen Generator, Model GN2-1800C11-XP2, Serial #42118. Rated capacity of 3,745 SCFH. Produces Nitrogen at 99.5% purity. Inlet pressure of 110 PSIG. Minimum inlet piping size 2''. Unit includes (2) Penway Inc. air receiver tanks rated at 150 psi at 450 degrees F, National Board #34983, 34984. (2) Manchester Tank 400 gallon tanks rated 200 psi at 450 degrees F. Refrigerated Air Dryer, Model GRF-250A-436, Serial #41822, 3/60/460V. Refrigeration compressor 1.5 HP. R404a refrigerant type. Built 2013. Overall dimensions: 85'' wide x 125'' long x 117'' tall.

MFR: Great Lakes

Used Coperion Werner & Pfleiderer ZSK 40 Twin Screw Extruder

Used Coperion-Werner & Pfleiderer 40mm Co-Rotating Twin Screw Extruder, Type ZSK 40. Extruder features a 44:1 L/D ratio, maximum screw speed of 1,200 RPM, and 150 HP motor rated for 460 VAC, 60 Hz, 3-phase power. Equipped with a Flender 1.43:1 ratio gearbox and Brunel coupler. Barrel is electrically heated and water cooled. Controls include an Allen-Bradley SLC 5/05 PLC with 120 VAC control voltage and Coperion-Werner & Pfleiderer control panel. Includes Coperion ZS-B40 side feeder powered by a 3 HP, 460 VAC, 60 Hz, 3-phase motor with an adjustable screw speed range of 44-400 RPM. Includes control cabinet and drive cabinet. Possible applications include compounding, mixing, blending, and extrusion of suitable process materials and products. Serial # 53002, Built 2005.

MFR: Coperion

Used Unique Mixers & Furnaces MME-3 PVT Mixtruder – 6 Liter Stainless Steel Masticator Mixer Extruder

Used Unique Mixers & Furnaces MME-3 PVT Mixtruder 6 Liter (1.58 Gallons) Stainless Steel Masticator Mixer Extruder. 316 stainless steel product contact surfaces, 304 stainless steel non contact surfaces. 6 liter (1.58 gallon) total capacity, 3 liter (.80 gallon) working capacity. Masticator blades, jacketed bowl rated 4 kg/ sq centimeter (56 psi). 3 HP, 230/460 volt, 1705 rpm motor thru 17.12:1 gearbox mixer motor drive. Extruder screw driven by 3 hp, 230/460 volt, 1705 rpm thru 17.12:1 gearbox extruder motor drive. Removable end plates, flat cover, mounted on unitized base. External control panel with VFD motor controllers, order# U-2805. Built 2006

MFR: Unique

Unused Paul O. Abbe Model RCVD 1.1 Sanitary Rota-Cone Vacuum Dryer – 1.7 Cu. Ft.

Unused- Paul O. Abbe (Certified by DCI Inc.) Model RCVD 1.1 Sanitary Rota-Cone Vacuum Dryer. Working capacity. 1.7 Cubic Foot, Total Capacity (12 Gallon). Type 316L Stainless Steel Construction. 18" Inside Diameter Shell that is Electropolished. Sanitary 6" Inlet with Gasketed Cover and 3" Sanitary Outlet, No Valve. Internal Rated 35 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 35 PSI/Full Vacuum. Type 304 Stainless Steel Jacket rated 45 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 45 PSI/Full Vacuum. Jacket Volume is 2-gallon capacity. Vessel is Insulated with 1" Chloride Free Insulation with 316L SS Shroud. National Board, ASME & U Stamped. Includes Stainless Steel Hp TEFC Motor, 400 Volt, 3/50. CE Certified. Hollow Bore Gear Motor. Approx. 8 RPM Output Speed, mounted through Aluminum Frame Gear Reducer at 188.5/1 Ratio. 304 Stainless Steel Tubular Legs and Base. Includes Internal Sanitary Vacuum Line, Gas Purge and RTD Probe. Stainless Steel Rotary Unions. Includes Brake Motor with Inverter, and Positioning Disc. Does Not Include Control Panel. Drawings and Manual are available. Serial Number JS7845A, Built in 2020. Built for a Pharmaceutical Company in the UK and it was NEVER USED. Still in storage in the UK. Ready for Shipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Paul O Abbe

Unused Paul O. Abbe Sanitary Rota-Cone Vacuum Dryer – Model RCVD 1.1 | 316L Stainless Steel

Unused- Paul O. Abbe (Certified by DCI Inc.) Sanitary Rota-Cone Vacuum Dryer, Model RCVD 1.1, 316L Stainless Steel. Working capacity. 1.7 Cubic Foot, Total Capacity (12 Gallon). Type 316L Stainless Steel Construction. 18" Inside Diameter Shell that is Electropolished. Sanitary 6" Inlet with Gasketed Cover and 3" Sanitary Outlet, No Valve. Internal Rated 35 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 35 PSI/Full Vacuum. Type 304 Stainless Steel Jacket rated 45 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 45 PSI/Full Vacuum. Jacket Volume is 2-gallon capacity. Vessel is Insulated with 1" Chloride Free Insulation with 316L SS Shroud. National Board, ASME & U Stamped. Includes Stainless Steel Hp TEFC Motor, 400 Volt, 3/50. CE Certified. Hollow Bore Gear Motor. Approx. 8 RPM Output Speed, mounted through Aluminum Frame Gear Reducer at 188.5/1 Ratio. 304 Stainless Steel Tubular Legs and Base. Includes Internal Sanitary Vacuum Line, Gas Purge and RTD Probe. Stainless Steel Rotary Unions. Includes Brake Motor with Inverter, and Positioning Disc. Does Not Include Control Panel. Drawings and Manual are available. Serial Number JS7845A, Built in 2020. Built for a Pharmaceutical Company in the UK and it was NEVER USED. Still in storage in the UK. Ready for Shipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Paul O Abbe

Used Sullair RC-250-460-3-60-A Refrigerated Air Dryer – 250 SCFM

Used- Sullair Model RC-250-460-3-60-A Refrigerated Air Compressed Dryer. 250 Scfm. Maximum air pressure 230 PSIG at maximum air inlet temperature 150 degrees F. R134a refrigerant, 35 ounces. Compressor driven by a 1.77hp, 3/60/208-230/460 volt, 3155 rpm motor. Fan driven by .39HP. Serial#1412SA01020. 3/60/460 Volt.

MFR: Sullair

Sturtevant Model 3B Simpactor Mill, 16" Diameter.

Used- Sturtevant Model 3B 16" Diameter Simpactor Mill. Carbon steel construction. Approximate capacity 3.5 tons per hour, depending on product. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial# 504.

MFR: Sturtevant