Stock No.:
10755143Used Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned
Used-Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ratio of 10.73:1 and is direct driven by a 60 HP D/C motor with Saftronics SCR control. Manual screen changer mounted on the extruder discharge. Includes panel with controls. Reported to be reconditioned.
MFR: Gloucester
Stock No.:
10755144Used Gloucester 2.5" Single Screw Extruder – 32:1 L/D, Air-Cooled & Vented
Used- Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control panel and 5-hole strand die
MFR: Gloucester
Stock No.:
10755152Used Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor
Used- Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is supplied loose. Includes two (2) new / rebuilt screws. 460/3/60. Serial# 36736/25.
MFR: Gloucester
Stock No.:
42530005Used Stokes BB2 Rotary Tablet Press – 27 Stations, High-Speed Tablet Production
Used- Stokes Rotary Tablet Press, Model BB2. 27 Stations. Keyed upper punch guides, 3/60/220/440, rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons.
MFR: Stokes
Stock No.:
42530006Used Stokes BB2 Rotary Tablet Press – 27 Stations, 1,400 Tablets/Min
Used- Stokes Model BB2 Rotary Tablet Press. 27 Stations. Rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons. Keyed upper punch guides. 3/60/220/440 Volt.
MFR: Stokes
Stock No.:
53011032Unused APV Crepaco W30/25 Stainless Steel Centrifugal Pump – 155 GPM, 7.5 HP, 2.5" Inlet & 2" Outlet
Unused- APV Crepaco Centrifugal Pump, Stainless Steel, Model W30/25. Approximate 155 gallons per minute, 141 head feet @ 3500 rpm. Approximate 2.5" inlet, 2" outlet. Driven by a 7.5hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9344-95.
MFR: APV/Crepaco
Stock No.:
54307001Parr 4561 Mini Reactor System 300 mL 350°C 3000 PSI Used Laboratory Reactor
Used 2023 Parr 4561 mini bench top reactor system, 300 mL, rated 3000 psi at 350 Degrees C, complete with A2590HC11EB heater/cooler block and Parr 4848 controller, designed for high pressure lab scale reaction and hydrogenation work. Cylinder 2.5" I.D. x 4" deep. Rated 3000 psi at 350 degrees C. With Model A2590HC11EB HTR/Cool ALUM BLK. Includes model 4848 reactor controller. Serial# 4560-2304-156654. Manufactured in 2023 and removed from lab/process service; reported in very good condition. Photos, data plate, and any available documentation are recommended for buyer verification
MFR: Parr
Stock No.:
43753014Used Glatt 78L Stainless Steel Tote – 20.6 Gallon, 2.7 Cubic Feet
Used- Glatt Tote, 78 Liter (20.6 Gallon), 2.7 Cubic Feet, Stainless Steel. No valve or cover.
MFR: Glatt
Stock No.:
1015138920mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder
Used-20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extruder is powered by 5 hp AC motor with Allen Bradley 1336 impact drive unit, 588 rpm screw speed. Includes Brabender 1/2 hp model MS-FW40/Optus-70 feeder, spare used motor and gearbox.
MFR: Werner & Pfleiderer
Stock No.:
10151643Used Patterson-Kelley 20 Cu. Ft. Stainless Steel V-Blender – 5 HP Drive with 2 HP Intensifier Bar
Used Patterson-Kelley 20 Cu. Ft. Stainless Steel V-Blender 5 HP Drive with 2 HP Intensifier Bar. Machine rated 65# per cubic foot. On stand with 5 HP, 230/460 volt drive motor and intensifier bar 2 HP motor. (2) 18" loading covers with (1) 8" discharge port with air operated butterfly valve. Last used on starch.
MFR: Patterson Kelley
Stock No.:
44847019Used Pfaudler 20-Gallon Reactor – 316 Stainless Steel, Vertical | Pressure-Rated Industrial Reactor with Anchor Agitator
Used- Pfaudler Reactor, 20 Gallon, 316 Stainless Steel, Vertical. Approximately 18" diameter x 18" straight side, dished top and bottom. Internal rated 60 psi or full vacuum at 350 degrees F, carbon steel jacket rated 90 psi at 350 degrees F. Anchor style agitator blade, driven by a Pfaudler drive, size 2.5 TWV, model SV-48270C-AKC, serial #25032X, ratio 5 to 1, set up for hydraulic drive, connection for drive broken off and missing, no power pack. Openings: top, 1", 1-1/2", (3) 2", (2) 4" hand holes; 2" center bottom outlet. Mounted on 3 carbon steel legs. National Board #28175, serial #E369-1492.
MFR: Pfaudler
Stock No.:
45648001Used Alfa Laval / Sharples PM-40000 (P-4600) Super-D-Canter Centrifuge – 3,350 RPM
Used- Alfa Laval / Sharples PM-40000 (Same as a P-4600) Super-D-Canter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 3350 rpm. 5.5" single lead conveyor with sintered tungsten carbide wear protection tiles, hogged-out cake discharge ports with replaceable wear liners, base, casing, feed pipe, P90 gearbox 98:1 ratio, main drive sub-base, 60 hp drive motor, 575/3/60, Eddy current backdrive, lube system, vibration isolators, safety guards, includes control panel with Danfoos electronic drive.
MFR: Sharples