Stock No.:
51121011Used Hutchinson Hayes 5500 High-G Centrifuge | 316 SS Wetted Parts | 3700 RPM | 230 GPM (52 m³/hr) | 16" x 55" Bowl | Control Panel | Mounted on Carbon Steel Frame
Used Hutchinson Hayes High-G Centrifuge Model 5500. 316 Stainless Steel Wetted Parts. Max Bowl Speed 3700 RPM, Max Operating Temp 275 F, 52 M3/hr max flow. 230GPM. Approximately 16" diameter x 55" long bowl. Serial# 995500-220. Mounted Control Panel, Centrifuge is mounted on carbon steel frame.
MFR: Hutchinson Hayes
Stock No.:
51188005Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill – Stainless Steel
Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill, All stainless-steel wetted parts. The Chilsonator uses dual 16" x 20" radial cored rolls with controlled hydraulic pressure and feed augers to compact powders into fees screws for improved flow and reduced dust. These feed screws are then processed by the HAS030 Comminutor Mill, which employs interchangeable screens and a hammer/knife design for precise particle size reduction. This integrated system delivers efficient compaction, milling, and screening for pharmaceutical, chemical, food, and specialty material applications. (A 102-1/2" , 5 DECK SCREENER IS NOT INCLUDED WITH THIS SYSTEM. AARON WILL FACILITATE LOADING INCLUDED IN THE FINAL PRICE). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Fitzpatrick
Stock No.:
54066002Used Bay Plastics Machinery BX16G Strand Pelletizer | 16" Wide 30 HP Plastic Pelletizer
Used- 16" Wide Bay Plastics Machinery Strand Pelletizer, Model BX16G. 30 HP. 65" infeed height. 16" (400mm) feed width. 12" (300mm) rotor diameter, Stellite-Tipped. 698 RPM rotor. 260 RPM feed. 4.25" diameter lower feed roll. 2.25" diameter upper feed roll. 30 HP Toshiba AC Motor with ABB Drive Control Panel. 460/3/60, 37.5A. 286T Frame, TEFC. ABB ACS550 Variable Frequency Inverter Drive. Safety Interlock System, Tool-less Cutting Chamber Entry, Slide-Out Discharge, Pneumatic Cutting Housing Lift. Pelletizer Start/Stop Buttons, Red Lion Digital Rotor RPM Readout, Speed POT, West 6100+ Temp Controller, Temp Controller On/Off Toggle Switch. Approximate Dimensions: 92" L x 64" W x 87" H. On Casters. 12848 Hours Showing On Meter.
MFR: BPM
Stock No.:
54176001Used CPM Cracking Mill – Model DPHX1600-84, 125 HP
Used- CPM Cracking Mill, Model DPHX1600-84. (2) pair of 16" Diameter x 84" Long chilled iron rolls. Carbon steel construction, corrugated rolls, manual roll adjustment. High volume pocket feeder. Driven by a 125hp 3/60/460V 1800rpm motor. Built 2020. Previously used on soybeans.
MFR: CPM
Stock No.:
51105005Rebuilt Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge – Alloy 2.4602, 3200 RPM, 30 kW
Rebuilt- Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge. Alloy 2.4602 construction (product contact areas); maximum bowl speed 3200 rpm; approximate single lead conveyor with welded hard facing; Back drive with powerpack; feed pipe; lubrication system; adjustable liquid plate dams; Approx. 30 KW; 400/3/50/2956 rpm ABB main drive motor with frame/casing; vibration isolators; safety guards and control. New 2001. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Flottweg
Stock No.:
45003001Used Alfa Laval PM-3600 Super-D-Canter Centrifuge | 3,500 RPM | Industrial Liquid-Solid Separation
Used- Alfa Laval / Sharples PM-3600 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3500 rpm, 4-1/2" single lead conveyor, liquid plate dams, gearbox 125:1 ratio, base, casing, approximate 37kw (49.6hp) main drive motor (380/50/3), back drive moto. Mounted on a carbon steel sub-frame with vibration isolators, safety guards.
MFR: Sharples
Stock No.:
11453551Used 160 Gallon Feldmeier Reactor, 316L stainless steel construction
Used-160 Gallon Feldmeier Reactor, 316L stainless steel construction, 320 grit and electropolished internal, approximately 48" diameter x 10" straight side, hinged dish top, hemispherical bottom, rated 50 psi and full vacuum at 350 f internal, jacketed for 150 psi at 350 f, anchor agitator with sidewall scrappers, driven by 7.5 hp motor drive, and mechanical seal, bridge mounted tilt out agitation system with hydraulic cylinder and onboard 2 hp hydraulic pump, top mounted baffle, (3)3", 2", (4)1.5" top ports, 2" bottom outlet, on 4 stainless steel legs.
MFR: Feldmeier
Stock No.:
53448002Unused Howden ExVel Turbo Fan HBXrG-20/675-LG0 – High-Performance Industrial Fan
Unused- Howden ExVel Turbo Fan, Model HBXrG-20/675-LG0. Maximum inlet volume; 3.18 m3/s, 6738.99 ACFM. Maximum pressure rise; 290.96 kPa, 42.20 PSI. Maximum inlet temperature; 176.7 C, 350.1 F. Maximum outlet temperature; 196.0 C, 384.8 F. Maximum impeller power; 1196 kW, 1603.9 HP. Nominal operation speed; 5681 rpm. Design temperature; 230.0 C, 446.0 F. Design pressure; 1878 kPa(a), 272.2 PSI. Siemens 1500 series PLC and Bently Nevada 3500 monitor system. Serial # NFF00019-10, Built 2020.
Stock No.:
54660001Unused Alfa Laval TL15-BFG Gasketed Plate Heat Exchanger – 139 Plates
Unused 2022 Alfa Laval Model TL15-BFG gasketed plate heat exchanger with 139 plates and 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.
MFR: Alfa Laval
Stock No.:
546600022022 Alfa Laval TL15-BFG Plate Heat Exchanger – Unused
Unused Alfa Laval TL15-BFG gasketed plate heat exchanger was manufactured in 2022 and includes 139 plates measuring 0.4 mm thick. 1622 SQ FT. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.
MFR: Alfa Laval
Stock No.:
54660003Alfa Laval TL15-BFG Gasketed Plate Heat Exchanger – Never Used
Never placed into service, this 2022 Alfa Laval Model TL15-BFG gasketed plate heat exchanger provides 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.
MFR: Alfa Laval