https://ww2.aaronequipment.com/Images/ItemImages/Plastics-Equipment/Size-Reduction-Dual-Rotor-or-Single-Rotor-Shredders/Shred-Tech-ST-25EL_54687051_aa.jpg

Stock No.:

54687051

Used Shred-Tech model ST-25EL shredder. The shredder has a 16" W x 34.5" L chamber opening, (40) 7.75" diameter knives. Has gear reducer. Missing its motor.

Used-Shred-Tech model ST-25EL shredder. The shredder has a 16" W x 34.5" L chamber opening, (40) 7.75" diameter knives. Has gear reducer. Missing its motor.

MFR: Shred-Tech

https://ww2.aaronequipment.com/Images/ItemImages/Fork-Lifts-Lift-Trucks/Fork-Lifts-Lift-Trucks/MX4-400_54687054_aa.jpg

Stock No.:

54687054

Used TUG electric tow tractor is model# MX4 400, serial number 850007, capacity 4000lbs, built November of 2002. TUG has AC drive system. TUG is 57" wide x 117" long x 66" tall. TUG has warning light...

Used-TUG electric tow tractor is model# MX4 400, serial number 850007, capacity 4000lbs, built November of 2002. TUG has AC drive system. TUG is 57" wide x 117" long x 66" tall. TUG has warning light attached. Mirrors require repair. Two Nutting quad steer trailers each with 4000 lbs capacity with accurate tracking/trailing characteristics for optimal precision maneuverability. Follows directly behind the electric tow tractor. Deck size is 50" wide x 98" long.

https://ww2.aaronequipment.com/Images/ItemImages/Homogenizers/Homogenizers/MT3-95-3A_54687065_aa.jpg

Stock No.:

54687065

Used Kinematica Megatron model MT3-95-3A in-line homogenizer. Type 316L stainless steel construction. Disperses and emulsifies via a rotor/stator shear generator. Operates at 3600 rpm driven by a 35...

Used-Kinematica Megatron model MT3-95-3A in-line homogenizer. Type 316L stainless steel construction. Disperses and emulsifies via a rotor/stator shear generator. Operates at 3600 rpm driven by a 3540 rpm 50 hp motor. Homogenizing generator is equipped with a single mechanical seal and a cooling jacket. Internal operating pressure is 150 psi at 245 F. Flow rate up to 50 gpm (water) depending on product. Requires 440 vac 3 ph electrical power. Assembled on a stainless steel frame with adjustable feet. New 2000. Serial number R95579. Good condition.

https://ww2.aaronequipment.com/Images/ItemImages/Dust-Collectors/Dust-Collectors/Hi-Vac-240_54687068_aa.jpg

Stock No.:

54687068

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 1880.

MFR: Hi-Vac

https://ww2.aaronequipment.com/Images/ItemImages/Dust-Collectors/Dust-Collectors/Hi-Vac-240_54687069_aa.jpg

Stock No.:

54687069

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 3227.

MFR: Hi-Vac

https://ww2.aaronequipment.com/Images/ItemImages/Screeners-Sifters/Circular-Screeners/Kason-K72-1-SS_54687076_aa.jpg

Stock No.:

54687076

Used Kason Model K72-1-SS 72" Single-Deck Circular Vibratory Screener With 2 HP Motor

Used Kason Model K72-1-SS 72" single-deck circular vibratory screener. Unit includes one 18" deep carbon steel upper section with one 18" center opening, (2) 8" openings and one 16" x 8" covered oval side discharge. Screener has one 18" deep stainless steel deck with a funneled 10" bottom opening and 5.5" top opening. Mounted on a 36" high carbon steel base and driven by a 2 hp motor requiring 230/460 VAC, 3-phase electrical service. Approximate overall dimensions are 108" x 80" x 80". Job #83113. Serial #M7128. Manufactured May 2006. Possible applications include screening, scalping, sizing and separation of compatible powders, granules, dry ingredients and other suitable bulk solids.

MFR: Kason

https://ww2.aaronequipment.com/Images/ItemImages/Fork-Lifts-Lift-Trucks/Fork-Lifts-Lift-Trucks/FL40EX_54687089_aa.jpg

Stock No.:

54687089

Used Drexel FL40EX 4,000 lbs explosion proof electric forklift. Serial # 900826-089. Current model. Battery is 36 VDC with a 6 hr rate run time. Has a maximum lift height of 106". The fork legnth is ...

Used-Drexel FL40EX 4,000 lbs explosion proof electric forklift. Serial # 900826-089. Current model. Battery is 36 VDC with a 6 hr rate run time. Has a maximum lift height of 106". The fork legnth is 35.25". Mast has lift and tilt controls. Equipped with brass clad forks to prevent sparks. Includes MAC-Motor Model 18M1050-9C22 battery charger. Forklift weight with battery is 8530 pounds. Hour meter shows 1061 hrs. Built 9-27-91. The battery has been charged and seems to hold a charge. This forklift has low hours and appears to be in very good operational condition. (Is stored inside at our Warehouse) Good condition. Tires are for outside use. New cost is $75,776.00 including the battery and charger.

https://ww2.aaronequipment.com/Images/ItemImages/Plastics-Equipment/Wash-Lines/54687106_aa.jpg

Stock No.:

54687106

Used Two-stage spray washer. The conveyor spray washer consists of a 73" wide x 99" long interlocking plastic conveyor belt inlet, (2) 8" diameter x 73" long brush rollers for cleaning the bottom, a ...

Used-Two-stage spray washer. The conveyor spray washer consists of a 73" wide x 99" long interlocking plastic conveyor belt inlet, (2) 8" diameter x 73" long brush rollers for cleaning the bottom, a 24" long washing station that uses water and a large brush roller for cleaning the top, a 12" long drying section that uses an air knife, a 73.75" wide 54" long interlocking plastic conveyor belt outlet, and a stainless steel tub that is used for the collection of waste water. The washer has a 73" wide x 2.25" tall work opening and a 36" working height. Overall dimensions are 110" wide x 200" long x 70" tall. This conveyor washer unit was last used for washing stone table top counters.

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Continuous-Mixer/Oakes-8MB51_54687109_aa.jpg

Stock No.:

54687109

Used Two Oakes Model 8MB51, jackted high shear continuous rotor stator pin mill mixers with 316 stainless steel contact parts mounted on a stainless steel base. Rated from 50 to 1,000 lb per hour. 2....

Used-Two Oakes Model 8MB51, jackted high shear continuous rotor stator pin mill mixers with 316 stainless steel contact parts mounted on a stainless steel base. Rated from 50 to 1,000 lb per hour. 2.5" feed flanges. Mixers are driven by 5 hp, 1680 rpm motors requiring 460 V, 3 ph electricity. Allen Bradley powerflex 70 controls. System mounted on a stainless steel base frame. Overall dimensions are approximately 45" W x 50" L x 79" H

MFR: Oakes

https://ww2.aaronequipment.com/Images/ItemImages/Homogenizers/Homogenizers/Sonic-XS-1500_54687115_aa.jpg

Stock No.:

54687115

Used Sonic Corp. Sonolator model XS-1500 inline high pressure homogenizer with a Moyno model 9P8-SSE-X 8" progressive cavity pump. The Sonolator is an in-line homogenizing device that uses high press...

Used-Sonic Corp. Sonolator model XS-1500 inline high pressure homogenizer with a Moyno model 9P8-SSE-X 8" progressive cavity pump. The Sonolator is an in-line homogenizing device that uses high pressure and ultrasonic cavitational energy to create emulsions. The positive displacement pump has a 4" sanitary tri-clamp fitting that connects to an 8" flanged inlet and the Sonolator has a 2" sanitary tri-clamp outlet. The pump has up to an estimated 20 gpm and a 600 psi discharge pressure. Driven by a 40 hp 3560 rpm motor that has a 6.2:1 reducer. Overall dimensions are 30" wide x 200" long x 32" tall. Requires 230/460 vac 3 phase electrical supply. Fair condition.

MFR: Sonic

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Continuous-Mixer/Oakes-14MC20_54687117_aa.jpg

Stock No.:

54687117

Used Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable...

Used-Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable speed drive. The mix head is jacketed. The mix head has 1.5" triclamp connections. Equipped with a size 30 Waukesau positive displacement pump with 1.5" triclamp connections. All mounted in a stainless steel skinned cabinet on casters. 230/460 vac 3 ph power required. Oakes mixers are designed to homogenize or aerate slurry to produce a highly uniform and stable cell structure. OAD 41" wide x 74" long x 77.5" tall.

MFR: Oakes

https://ww2.aaronequipment.com/Images/ItemImages/Filters/Filter-Press/Sweco-WWF30S-3L_54687122_aa.jpg

Stock No.:

54687122

Used Sweco White Water Filter. Model WWF30-3L. Serial Number 76835-C-1194. 304 stainless steel construction. Filter has a high flow rate, centrifugal screening of suspended solids down to 500 mesh (2...

Used-Sweco White Water Filter. Model WWF30-3L. Serial Number 76835-C-1194. 304 stainless steel construction. Filter has a high flow rate, centrifugal screening of suspended solids down to 500 mesh (25 Microns)(May require change of screens), a flow rate of 1350-600 GPM, (9) 10"x 20" screen panels, (9) 10" x 10" screen panels, (1) 8" infeed flanged connector, (1) 12" outfeed flanged connector, and (1) 8" concentrate flanged connector. Filter was new in 1994. Have manual on file. Good condition.

MFR: Sweco

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.