Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger

Used- Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger. Approximately 745 square foot 316L stainless steel 20" diameter X 20' face to face length. 316L SS shell side rated 150 PSI @ 20 to 320 degrees F. (190) 3/4" 316L SS tubes rated 150 PSI @ 20 to 305 degrees F. 3" Process nozzles with 1" vent and drain. 3" service nozzles. NB# 3879, S/N: 06- 290. Built 2007. Weight 6150#. Missing one head

MFR: Sisterville Tank Works

Reportedly Unused Mid-South Maintenance 745.7 Sq Ft 304 Stainless Steel Shell and Tube Heat Exchanger, 2016

Reportedly Unused Mid-South Maintenance horizontal shell-and-tube heat exchanger, 745.7 sqft, 304 stainless steel construction. Shell measures 20-inch OD 183-3/4 inches long, with 3/8-inch wall thickness. Includes (248) straight 304 stainless steel tubes, 3/4-inch OD 0.065-inch wall, with welded 304 stainless steel tube sheets. Shell-side MAWP 300 PSI at 500F; tube-side MAWP 100 PSI at 500F. Includes flanged stainless steel end chambers with elliptical heads, (2) 6-inch Class 150 inlet/outlet connections, (3) 2-inch Class 300 connections, and two welded saddle supports. Built to ASME Section VIII, Division 1. Serial number 316-0007, National Board number 2157. Manufactured 2016. s/n 316-0007

MFR: Mid South Maintenance

Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics

Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics. With dispersion blades and extruder screw discharge. Internal pressure: Atmospheric @ 353F shell is 7/16" thick. Jacket pressure: 125 psi @ 353F jacket is 3/8" thick. Mixer Dimensions: 32" x 32" x 25" high, approximate total capacity is 110 gallons. Extruder screw is 8" diameter driven by a hydraulic motor, and hydraulic tilt discharge are both powered by 30 HP 230/460 volts Vickers Hydraulic pumping system. Mixer Blades driven by a 25 hp US. varidrive motor, 220/440 volt. 31 to 125 RPM to chain and sprocket to give you approximately 15 to 62.5 RPM output speed on the blades. NB #1117, SN 86065. Built 1971.

MFR: J H Day

Used Retech VH34/75 Horizontal Shredder – 75 HP, 34” Feed, Vibratory Conveyor, 2” Screen, Built 2006

Used- Retech Model VH34/75 Horizontal Shredder. 5" x 34" in-feed opening, 16" diameter 44 cutter rotor with a 390 RPM rotor speed. Rotor is belt driven by a 75 HP 460V 1185 RPM motor. Two infeed rollers are powered by approximately 1 Kw SEW Euro drive motors and gearboxes. 41.5" in-feed height. 2" holes screen installed. Gravity discharge. Includes stand-alone starter / control panel and a 30' long vibratory in-feed conveyor. Model VR85/12, Serial# 8809020. No controls for conveyor. Serial# 8810010, Built 2006.

MFR: Retech

Used Retech / Vecoplan VH34/75 Horizontal Shredder – 75 HP with 30' Vibratory Infeed Conveyor

Used- Retech/Vecoplan Model VH34/75 Horizontal Shredder. 5" x 34" in-feed opening, 16" diameter 44 cutter rotor with a 390 RPM rotor speed. Rotor is belt driven by a 75 HP, 460 Volt, 1185 RPM motor. Two infeed rollers are powered by approximately 1 Kw SEW Eurodrive motors and gearboxes. 41.5" in-feed height. 2" holes screen installed. Gravity discharge. Includes stand-alone starter / control panel and a 30' long vibratory in-feed conveyor. Model VR85/12, S/N 8809020. No controls for conveyor. Built 2006.

MFR: Retech

Used Sullair Rotary Screw Air Compressor – Model 16-75

Used- Sullair Rotary Screw Air Compressor, Model 16-75. Maximum pressure rating 110 PSIG. Driven by 75 HP motor. 60,531 Hours.

MFR: Sullair

Used Conair CW1836 Thin Gauge Sheet Granulator – 75 HP, 18” x 36” Throat, Servo Feed, Built 2019

Used- Conair Thin Gauge Sheet Granulator, Model CW1836. 75 HP motor. 18" x 36" Throat size opening. (5) rotor knives. (2) bed knives. Hydraulic lift for easy screen change. Servo pull rolls for auto feed. Stand alone control panel. 3/60/460V. Built 2019.

MFR: Conair

Used Lee 75-Gallon Tilt-Back Dual Motion Agitator – 316 SS, XP Motor, Industrial Mixer

Used- Lee Floor Mounted 75 Gallon Dual Motion Tilt Back Agitator Assembly, Model 9M, 316 Stainless Steel. Approximate 30" wide anchor style agitator. Inner bars 11" x 1.5" wide x 5/16" thick. Outer bars 11.5" x 1.5" x 5/16" thick. Driven by a 2hp, 3/60/230/460 volt, 1725 rpm XP motor, thru dodge gearbox. Has tilt mounted stainless steel frame. Serial# 17378-2.

MFR: Lee Ind

Unused Komarek DH-300 Heavy-Duty Briquetting Press – 2–10 Tons/Hr, 75-Ton Roll Force, 75 HP

Unused Komarek Heavy-Duty Two-Roll Briquetting Press, Model DH-300. 75 tons of roll separating force. Rated throughput of 2-10 tons/hour depending on briquette size and density. Roll dimensions: 13'' - 20.5'' diameter x 4'' - 13'' width. Driven by a 75 HP motor. Gravity fed. Possible applications include briquetting and compacting operations for carbon based fuels, inorganic chemicals, mineral ores, industrial by-products, and metal powders. Serial# 051740-1-1, built 2022.

MFR: Komarek Greaves

Used Eirich RV-15 Mixer – 750L, 1200 kg Capacity, 75 HP Tool, 304 Stainless, Industrial Intensive Mixer

Used- Eirich Mixer, Model RV-15. 304 stainless steel product contact surfaces. Approximately 750 liter bowl. 1200 kg max capacity. 75 hp mixing tool. 10 hp pan motor. On board lubrication system with 2 hp pump. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Eirich

Amherst 75 Gallon Agitated Stainless Steel Pressure Tank

Used- Amherst Stainless Steel Pressure Tank, Approximately 75 Gallon, 304L Stainless Steel, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, (2) 2", 1/2". Center bottom outlet with manual ball valve. (1) 500 PSI Basket Strainer and Bag Filter. Control panel. Mounted on (4) legs with casters. National Board# 1472, Serial# 1707, Built 2021. Previously used for raw materials used in the production of molded fiber products.

Amherst 304L Stainless Steel 75 Gallon Vertical Pressure Tank

Used- Amherst 304L Stainless Steel Pressure Tank, Approximately 75 Gallon, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5 HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, 3", (2) 2", 1". 3" Center bottom outlet with manual valve. Mounted on (4) legs with casters. National Board# 1379, Serial# 1601, Built 2020. Previously used for raw materials used in the production of molded fiber products.