Large Capacity 10,000 Gallon 304L Stainless Steel Process Tank

Used 304L Stainless Steel Tank, Approximately 8,500 gallon. Tank measures approximately 110" diameter x 197" straight sidewall with a 15" cone bottom and is supported by (4) 48" legs. Features a cone bottom with center outlet, (6) 2" top fittings, and (1) 2" bottom outlet for process connections. The tank previously held a non-toxic latex solution and has been cleaned out. The tank was originally insulated, but the insulation has been removed, leaving the stainless steel exterior exposed.

Used 8,600 Gallon Stainless Steel Storage Tank – Food & Beverage Grade

Used- Approximate 8,600 Gallon 304 Stainless Steel Insulated Bulk Storage Tank, Vertical. Vessel measures 94" diameter X 288" straight side, sloped bottom leading to 3" diameter side bottom outlet. Also includes side bottom manway with cover. Vessel is fully insulated with foam and outer shroud. Previously used at juice facility. 304 SS

Used Tranter Superchanger 878.8 Sq. Ft. Heat Exchanger – 150 PSI, Expandable Frame

Used- Tranter Superchanger Approximate 878.8 Square Feet Surface Area Plate Heat Exchanger, Model 06-T16-UP-146. Approximate (146) 29" wide x 68" tall 316 stainless steel plates rated 150 psi at 20 to 200 degrees F. (2) 6" Diameter, (2) 8" diameter inlet & outlets. Mounted on an expandable carbon steel frame. Serial #SC-22880. Shop order # 83735. Built 1999. No National Board #. Unit is U stamped.

MFR: Tranter

Used Industrial Tranter Plate Heat Exchanger – 878.8 Sq. Ft., 150 PSI, Stainless Steel

Used- Tranter Superchanger Model 06-T16-UP-146 Plate Heat Exchanger, Approximate 878.8 Square Feet Surface Area. Approximate (146) 29" wide x 68" tall 316 stainless steel plates rated 150 psi at 20 to 200 degrees F. (2) 6" Diameter, (2) 8" diameter inlet & outlets. Mounted on an expandable carbon steel frame. Serial # SC-16071. Shop order # 71975. Built 1996. No National Board #, unit is U stamped.

MFR: Tranter

Used Tranter Superchanger Plate Heat Exchanger – 878.8 Sq. Ft., 316 Stainless Steel, 150 PSI

Used- Tranter Superchanger Plate Heat Exchanger, Approximate 878.8 Square Feet Surface Area, Model 06-T16-UP-146. Approximate (146) 29" wide x 68" tall 316 stainless steel plates rated 150 psi at 20 to 200 degrees F. (2) 6" Diameter, (2) 8" diameter inlet & outlets. Mounted on an expandable carbon steel frame. Missing manufacturers tag.

MFR: Tranter

Used Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001

Used- Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox rated at 1080 HP at a service factor of 1.5; Gearbox is direct driven in a wrap-around manner by a 900 HP Reliance Super RPM D/C motor; Liquid cooling system with heat exchanger for gearbox protection; 16" x 9 1/2" on center feed throat entrance; PSI continuous screen changer w/ stand is mounted on the extruder discharge. 16" x 9.5" feed throat with magnet; 52,000 lbs. extruder weight; 1,000 lbs. motor weight. Rare opportunity to purchase an extruder of this size. Per Davis Standard the thrust bearing rating is actually 1,468,000 pounds or 665,874 kgs. Unit was miss tagged at the factory. Serial# AA454. Built 2001. Last used in the extrusion of PP sheet. SCR and temperature control panel not included.

MFR: Davis Standard

Used Kent 9" x 24" Three Roll Mill – Industrial TRM for Fine Grinding & Dispersion

Used- Kent 9" 24" three roll mill with manual roll/apron and temperature control, 10 hp silent chain drive. (TRM). with manual roll set, manual apron set, and manual roll temperature control. Probably driven through a silent chain drive by a 10 HP motor. Does not have an electrical package.

GEA Nu-Con DT500 DEM Stainless Steel Rotary Air Lock Valve – 0.37kW Drive

Unused GEA Nu-Con Sanitary Stainless Steel Rotary Air-Lock Valve, Model DT 500 DEM. Material of construction: SS SS ICS. Includes drive, .37kW, gearmotor. Serial# 91611349.

MFR: Nu-Con Engineering

Used B&G Stainless Steel Tote – 9.5 cu ft Capacity

Used B&G Stainless Steel Tote 9.5 cu ft Capacity, approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.

MFR: B & G

Used Industrial Stainless Steel Tote Bin | 9.5 cu ft | B&G Storage Tank

Used- Industrial 304 Stainless Steel Tote Bin | 9.5 cu ft | B&G Storage Tank, approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.

MFR: B & G

Used Heavy-Duty Industrial Bin | 9.5 cu ft Stainless Steel

Used- Heavy-Duty Industrial Bin | 9.5 cu ft Stainless Steel, Manufactured by B&G. Approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.

MFR: B & G

Used 9.5 cu ft Stainless Steel Storage Bin | Food & Chemical Applications

Used- 9.5 cu ft Stainless Steel Storage Bin | Food & Chemical Applications, Manufactured by B&G. Approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.

MFR: B & G