Petro Chemical Equipment

3.5" Readco Twin Screw Continuous Processor

Used- 3.5" Readco Twin Screw Continuous Processor, model 3 1/2 HVY DU. Heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die, with spare set of screw splines set up for end bearing housing, on base. Mfg. 1987.

MFR: Readco

Used IKA Works Dispax Reactor – High Shear Inline Disperser, Model DR 2000/10, 30 HP

Used- IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute (8,000 l/h), nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 volt, 3525 rpm motor. 2" Inlet & outlet. Unit mounted on a base. Part# P015742. Serial # 2599-12.

MFR: IKA Works

Used Great Western Manufacturing Type TB, Model 611/4 Tru-Balance Screener

Used- Great Western Manufacturing Tru-Balance Screener, Type TB, 30" Diameter, Model 611/4 (QA30), 304 Stainless Steel. Approximate 500 pounds per minute with wheat flour. Approximate 30" diameter, (4) sieves. Approximate net sieving area 15 square feet. Driven by a 1.5 HP, 3/60/230/460 volt, 1160 rpm motor. 5" top opening, bottom openings: 5", 4". Mounted on a painted carbon steel frame. Serial# 3882. Built 1999.

MFR: BF Gump

Used Bowen BLSA Laboratory Spray Dryer – 316 Stainless | 15–80 lb/hr | 1000°F Inlet | Atomizer | Complete System

Used- Bowen Engineering BLSA Laboratory Spray Dryer. 316 stainless steel. 30" (770 mm) diameter x 28" (720 mm) straight side x 30" (770 mm) coned bottom. Approximate evaporation rate 15-80 pounds (6.8-26.3 kgs) an hour. Atomizer. Air requirements 100 psi (6.66 bar), Inlet temperature range to 1000 degree F (537.77 degree C), side access door. Digital control panel mounted on unit. Mounted on stainless steel legs. Includes cyclone, collection jar, gas heater and blower, piping and additional infrastructure. Previous used in a Nutraceutical application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Bowen

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 1–7 kg/hr | Mobile Unit

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 17 kg/hr | Mobile Unit. Approximate evaporation rate of 1-7 kg/hr. (2.2-15.4 Lbs./hr.) depending on product. Niro centrifugal air operated atomizer. Approx. 800 mm (31-1/2") diameter x 915 mm (36") straight side. Chamber is lagged and clad. Electric heater, cyclone, pipework and additional infrastructure. Mounted on mobile frame on wheels. Reported in good condition. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Niro

Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel

Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.

MFR: Tolhurst

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Diameter Model LS30S Circular Screener, Stainless Steel. Double Deck, 3 separation. Driven by a 1/2 HP, 3/60/230/460 Volt, 1140 rpm motor. Mounted on painted carbon steel base with casters. Serial# 589-74F.

MFR: Sweco

Used 500 Gallon Stainless steel Jacketed Mix Kettle

Used-Jacketed Mix Kettle, 300 Gallon, Stainless steel. With agitation.

Used 300 Cubic Foot Double Ribbon Mixer

Used-300 Cubic Foot Double Ribbon Mixer, ribbons and trough are stainless steel construction. Features carbon steel jacket rated for minus 20 to 250 degrees Fahrenheit at atmospheric pressure. Manufactured by Young Industries. Internal dimensions of mixing trough measure 178" long x 44" wide x 66" deep. Driven by 30 HP motor through heavy duty gearbox. Features end bottom discharge with butterfly valve.

MFR: Young Industries

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech

Groen Double Motion Inclined Agitation Jacketed Kettle – 300 Gallon, 3 HP Drives (Used)

Used- Groen Double Motion Inclined Agitation Jacketed Kettle 300 Gallon, 3 HP Drives. Vertical, flat open top with covers, Hemispherical bottom. Scrape agitation with "Tree" style secondary mixer. Jacket rated 90 PSI @ 332 Deg.F. Jacket tested good. 3 HP Drives. National Board# 12612, Serial# 75854-2-2. Built 2012

MFR: Groen

Used ROSS CDA-300 Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator – 300 Gallon Jacketed Mixing System

Used ROSS CDA-300 Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator 300 Gallon Jacketed Mixing System. 300 Gallon. Unit equipped with Portable Jacketed Tank rated 2 PSI / Full Vacuum @ 300 Deg.F. Jackets rated 50 PSI @ 300 Deg.F.. Approx. 11'1" Overall height. Explosion Proof Motors (XP). (1) 20 HP, 1775 RPM, 208-230/460 volt. (1) 30 HP, 1775 RPM, 208-230/460 volt.

MFR: Ross Industries