Packaging Equipment

Used 3,200 Gallon Stainless Steel Tank – Vertical Dished Vessel with Multiple Po

Used- Stainless Steel Vertical Storage Tank, Approximate 3,200 Gallon Capacity. Approximately 88" diameter x 120" straight side. Dished top, and bottom. Openings Top: (2) 4", (4) 2". 2" Side bottom outlet, 3" bottom & 4" Center Bottom Outlet with approximate 32" discharge height. Side bottom manway with cover. Mounted on (4) stainless steel legs. No mfg tag.

Unused CECO Peerless 324 Gallon 316 Stainless Steel Vertical Oxygen Separator Vessel | ASME Pressure Vessel

Unused CECO Peerless 324 Gallon 316 Stainless Steel Vertical Oxygen Separator Vessel | ASME Pressure Vessel. 42" ID Vertical Oxygen Separator, PMC Part No. VGSP-42I-380SS-001, Drawing No. 9558B-1, is a heavy-wall vertical ASME pressure vessel designed for high-pressure oxygen service and deflagration control applications. Fabricated entirely from 316 stainless steel in accordance with ASME Section VIII Division 1, 2023 Edition, the vessel is rated for full vacuum to 380 PSIG at 194F with a MAWP of 380 PSI at 194F, a MAP of 380 PSI at 100F, and an MDMT of -4F at 380 PSI. The separator is fully ASME U-stamped and National Board registered, requires RT1 radiography, and is hydrostatically tested to 494 PSI for one hour with no PWHT required. Construction includes a 1/2" thick SA-240-316 shell, 1/2" thick 2:1 ellipsoidal heads with 0.4024" minimum formed thickness, heavy-wall Schedule 160 drain and liquid outlet nozzles, reinforced manway assembly, four support legs, lifting lugs, and a davit arm assembly. The vessel includes multiple flanged process and instrumentation connections consisting of 2" inlet, liquid inlet, and outlet nozzles, 3" liquid outlet and drain nozzles, a 2" gas purging connection, 1" DPIT, pressure indicator, vent, and relief valve nozzles, dual 3/4" level gauge connections, dual 1" level controller connections, four 1" level switch connections, and an 18" Class 300 manway. Internal surfaces are oxygen cleaned with neoprene gaskets and flange covers installed for shipment, while the exterior is cleaned, de-scaled, and finished with a sugar blast coating. Estimated vessel weights are approximately 2,412 lbs empty, 5,154 lbs operating, and 5,163 lbs hydrotest weight, with an internal capacity of approximately 324 gallons and a center of gravity located 13.12" from datum. The engineering design package includes ASME VIII Division 1 stress calculations, nozzle reinforcement analysis, hydrostatic test verification, wind and seismic analysis, structural support calculations

MFR: Peerless

Unused CECO Peerless 316 Stainless Steel Oxygen Separator Pressure Vessel | 380 PSI ASME Vessel

Unused CECO Peerless 316 Stainless Steel Oxygen Separator Pressure Vessel | 380 PSI ASME Vessel. 42" ID Vertical Oxygen Separator, PMC Part No. VGSP-42I-380SS-001, Drawing No. 9558B-1, is a heavy-wall vertical ASME pressure vessel designed for high-pressure oxygen service and deflagration control applications. Fabricated entirely from 316 stainless steel in accordance with ASME Section VIII Division 1, 2023 Edition, the vessel is rated for full vacuum to 380 PSIG at 194F with a MAWP of 380 PSI at 194F, a MAP of 380 PSI at 100F, and an MDMT of -4F at 380 PSI. The separator is fully ASME U-stamped and National Board registered, requires RT1 radiography, and is hydrostatically tested to 494 PSI for one hour with no PWHT required. Construction includes a 1/2" thick SA-240-316 shell, 1/2" thick 2:1 ellipsoidal heads with 0.4024" minimum formed thickness, heavy-wall Schedule 160 drain and liquid outlet nozzles, reinforced manway assembly, four support legs, lifting lugs, and a davit arm assembly. The vessel includes multiple flanged process and instrumentation connections consisting of 2" inlet, liquid inlet, and outlet nozzles, 3" liquid outlet and drain nozzles, a 2" gas purging connection, 1" DPIT, pressure indicator, vent, and relief valve nozzles, dual 3/4" level gauge connections, dual 1" level controller connections, four 1" level switch connections, and an 18" Class 300 manway. Internal surfaces are oxygen cleaned with neoprene gaskets and flange covers installed for shipment, while the exterior is cleaned, de-scaled, and finished with a sugar blast coating. Estimated vessel weights are approximately 2,412 lbs empty, 5,154 lbs operating, and 5,163 lbs hydrotest weight, with an internal capacity of approximately 324 gallons and a center of gravity located 13.12" from datum. The engineering design package includes ASME VIII Division 1 stress calculations, nozzle reinforcement analysis, hydrostatic test verification, wind and seismic analysis, structural support calculations

MFR: Peerless

Used 333 Sq Ft Heat Exchanger, Duplex 2205 Construction, 662 PSI Shell Rating, 2023

Used Wuxi Chemical Equipment Horizontal 333 sq. ft. Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 288.3 psi at 32 to 330 degrees F, 16' 7'' tube length. Duplex 2205 shell rated 662.3 psi at 32 to 300 degrees F. 15'' Shell diameter. Carbon steel head. National Board #573, Serial #WHA22-087-2-2-C, built 2023.

Used Wuxi Chemical Equipment 333 Sq Ft Shell & Tube Heat Exchanger, Duplex 2205, 2023

Used Wuxi Chemical Equipment 333 Square Foot Horizontal Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 288.3 psi at 32 to 330 degrees F, 16' 7'' Tube length. Carbon steel head. 15'' Shell diameter. Duplex 2205 shell rated 662.3 psi at 32 to 300 degrees F. National Board #572, Serial #WHA22-087-2-1-B, built 2023.

Wuxi 333 Sq Ft Shell and Tube Heat Exchanger, Duplex 2205 Tubes & Shell, High Pressure

Used Wuxi Chemical Equipment 333 Square Foot Shell and Tube Heat Exchanger, Horizontal. Duplex 2205 stainless steel tubes rated 288.3 psi at 32 to 330 degrees F, 16' 7'' Tube length. 15'' Shell diameter. Carbon steel head. Duplex 2205 shell rated 662.3 psi at 32 to 300 degrees F. National Board #574, Serial #WHA22-087-2-2-D, built 2023.

Used Meridian 3,400 Gallon Stainless Steel Vertical Storage Tank – 72" Diameter × 216" High

Used Meridian 3,400 Gallon Stainless Steel Vertical Storage Tank 72" Diameter 216" High. Top manhole. Dished Top, Slight Cone Bottom. Center bottom outlet. On (4) stainless steel legs. Serial# 6763918.

MFR: Meridian MFG

Used 3,400 Gallon (14,000 Liter) Vertical 304 Stainless Steel Tank

Used- 3,400 Gallon (14000 Liter) Tank, 304 Stainless Steel, Vertical. Approximately 86" diameter x 131" straight side.14-gauge side wall and 12 gauge top and bottom. Openings Top: 18" manway, with 2" Side port, 2" Bottom center discharge. Mounted on 6 legs. No manufacturers tag.

Shell & Tube Heat Exchanger, 4 Pass U Tube, Unused

Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-076, National Board# 2060, built 2015. OAD 358"L X 44"W X 82"T, 26609 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Shell & Tube Heat Exchanger, Unused- U Tube

Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-078, National Board# 2062, built 2015. OAD 358"L X 44"W X 82"T, 26609 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

U Tube Shell & Tube Heat Exchanger, Unused- 4 Pass

Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-071, National Board# 2055, built 2014. Unused- 4 Pass U Tube. OAD 358"L X 44"W X 88"T, 27313 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Unused 3,409 Sq. Ft., Carbon Steel 4-Pass U-Tube Shell & Tube Heat Exchanger – Industrial

Unused- Carbon Steel Approximate 3409 Square Feet 4-Pass U Tube Shell & Tube Heat Exchanger, Tema Type AEU, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-072, National Board# 2056, built 2015. OAD 358"L X 44"W X 82"T, 26609 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation