Your Files Are Being Processed
Please Wait
Aaron Video
Contact Aaron
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: [email protected]
Cart
View Your Price Quote
- Make sure all words are spelled correctly.
- Try different keywords.
- Try more general keywords.
-
{{#each productSuggestedQueries.results}}
- {{query}} {{/each}}
-
{{#each contentSuggestedQueries.results}}
- {{query}} {{/each}}
-
{{#each categories.results}}
- {{html title}} {{/each}}
-
{{#each content.results}}
- {{html title}} {{/each}}
-
{{#each queries.results}}
- {{query}} {{/each}}
630-350-2200
Unused Wisconsin Oven SWH-6126.5-G8 Heavy-Duty Walk-In Oven – Industrial | Temperature 800°F Max
Unused- Wisconsin Oven SWH Series Model SWH-6126.5-G8 Heavy Duty Natural Gas Walk-In Oven. Temperature Rating: Maximum 800 degrees F, Normal 700 degrees F, Minimum 290 degrees F above ambient. Temperature Uniformity: +/- 10 degrees F at 700 degrees F. Chamber Dimensions: 6'0" wide x 12'0" long x 6'6" high. Overall (approximate): 10'6" wide x 13'6" long x 11'8" high. Body Construction: Tongue & groove panel assemblies featuring our patented high efficiency panel seams, 6" of 6# density, industrial board type insulation with a 1,200 degrees F service temperature rating; removable 20 gauge 304 stainless steel interior; 20 gauge carbon steel exterior; 12 gauge base and roof trim. Oven Doors: Bi-parting horizontal swing at one (1) end only. Oven Floor: Reinforced insulated floor (2" thick) with 12 gauge wheel guides, and 1/8" of flat gasket under the wheel guides tracks to be 3" wide and centered 30" with the entrance ends. Recirculation: 11,500 CFM @ 15 HP with stainless steel wheel and shaft; belt driven. Exhaust: 1,900 CFM @ 1 HP; with motorized dampers on both the fresh air inlet and exhaust outlet. Heating Equipment: Industrial air heat burner rated at 800,000 BTU per hour. Hang Rails: Stainless steel load bar supports spaced every 18" each to support 25 lbs. Watlow F4T recorder/controller and a Honeywell 4200 paper recorder, 4.3" color touch screen; graphical trending; USB port for downloading data. Utility Requirements: 208 volt, 3 phase, 60 hertz, 1,000 BTU per cubic foot at a constant pressure of 2-5 PSIG. New in March, 2024.
| Model | SWH-6126.5-G8 |
| Category | Dryers - Drying EquipmentDryers - Drying Equipment |
| Subcategory | OvenOven |
| Chamber Length | 144 |
| Chamber Width | 72 |
| Chamber Height | 78 |
| Temperature Range - Low | 290 F |
| Temperature Range - High | 800 F |
| Power Supply Cycle | 60 |
| Power Supply Phase | 3 |
| Power Supply Voltage | 208 |
| Overall Dimensions | 10'6" wide x 13'6" long x 11'8" high |
| Year Built | 2024 |
Manufacturer Information:
- Brand: Wisconsin Oven
- Model: SWH-6126.5-G8
- Series: SWH Heavy-Duty Walk-In Oven
- Year: New in March 2024
- Type: High-Temperature Industrial Walk-In Oven
Description:
The Unused Wisconsin Oven SWH-6126.5-G8 is a heavy-duty, high-temperature walk-in oven engineered for precision heating applications. Designed with industrial-grade insulation and efficient airflow, it provides uniform heating (+/- 10°F at 700°F) for heat treating, composite curing, powder coating, and industrial drying processes.
Built with a 6" thick high-efficiency insulated panel system, a stainless steel interior, and a reinforced insulated floor, this rugged and reliable oven ensures consistent performance at up to 800°F. It features an industrial air heat burner (800,000 BTU/hr) and a recirculation system rated at 11,500 CFM @ 15 HP, providing efficient heat distribution.
Equipped with an advanced Watlow F4T touchscreen recorder/controller and a Honeywell 4200 paper recorder, the system allows for precise temperature control, graphical trending, and data logging via USB download.
Specifications:
- Maximum Temperature: 800°F
- Normal Operating Temperature: 700°F
- Minimum Temperature: 290°F above ambient
- Temperature Uniformity: ±10°F at 700°F
- Chamber Dimensions: 6'0" W x 12'0" L x 6'6" H
- Overall Dimensions: 10'6" W x 13'6" L x 11'8" H
- Body Construction:
- Tongue & groove panel assemblies with patented high-efficiency seams
- 6” of 6# density industrial board insulation (1,200°F rating)
- Removable 20-gauge 304 stainless steel interior
- 20-gauge carbon steel exterior
- 12-gauge base and roof trim
- Oven Doors: Bi-parting horizontal swing door (one end only)
- Oven Floor:
- 2” thick reinforced insulated floor
- 12-gauge wheel guides with 1/8” flat gasket under tracks
- 3” wide tracks, centered at 30” entrance ends
- Recirculation System:
- 11,500 CFM @ 15 HP
- Stainless steel wheel & shaft, belt-driven
- Exhaust System:
- 1,900 CFM @ 1 HP
- Motorized dampers on both fresh air inlet and exhaust outlet
- Heating System: Industrial air heat burner, 800,000 BTU/hr
- Control System:
- Watlow F4T Recorder/Controller (4.3” color touchscreen)
- Graphical trending & real-time monitoring
- USB port for data download
- Honeywell 4200 Paper Recorder
- Hang Rails: Stainless steel load bar supports every 18”, supporting 25 lbs each
- Utility Requirements:
- 208V, 3 Phase, 60 Hz
- 1,000 BTU per cubic foot at 2-5 PSIG
Applications:
The Wisconsin Oven SWH-6126.5-G8 Walk-In Oven is ideal for:
- Heat Treating & Metal Processing – Stress relieving, annealing, preheating
- Composite Curing – Aerospace, automotive, and industrial components
- Powder Coating & Finishing – Curing coatings on metal and composite materials
- Drying & Dehydration – Removing moisture from industrial components
- Plastics & Rubber Processing – Post-molding heat treatment
- Electronics & Semiconductor Manufacturing – Thermal testing & component drying
Alumina Products, Aluminum, Coating, Coating Products, Curing, Heat Treating, Oven
- Aerospace & Automotive Components – Composite curing & stress relieving
- Metal Parts & Fabrications – Heat treating & tempering
- Industrial Coatings – Powder coating & curing
- Electronics & Electrical Components – Drying & testing applications
- Plastic & Rubber Products – Thermal treatment for durability
- Unused Wisconsin Oven SWH-6126.5-G8 for sale
- Heavy-duty walk-in industrial oven
- 800°F high-temperature heat-treating oven
- Industrial walk-in oven with precision temperature control
- Aerospace & automotive composite curing oven
- Large-capacity industrial powder coating oven
- 800,000 BTU/hr high-performance heating oven
- Walk-in oven with advanced process control system
- Unused Wisconsin Oven SWH-6126.5-G8 industrial walk-in oven for sale
- High-temperature walk-in oven with 800,000 BTU/hr burner
- Aerospace and composite curing oven with uniform heat distribution
- 700°F rated heavy-duty industrial oven with recirculation system
- Walk-in powder coating oven with Watlow F4T control system
- Large industrial oven with stainless steel interior and digital recorder
- High-capacity heat treatment oven for manufacturing and metal processing
"Dealing with Aaron is an easy and enjoyable process"
"Aaron Equipment is always my first call for used process equipment. Their inventory and customer service has ensured successful project results every time. Thanks y’all!"
"I have purchased all different types of equipment from Aaron Equipment over the last 10 years and have always been 100% happy with not only the equipment but with their customer service!"
"Working with Aaron Equipment Company was as easy as it gets."
"It is a pleasure to work with AEK and I would recommend them as an equipment supplier."
"The partnership we enjoy with Aaron has helped our business to be what it is today – thank you guys!”
"I will definitely use Aaron Equipment in the future."
"Aaron’s customer service indicates that they want long term partnerships and that is something we especially appreciate."
"I really value shopping for used equipment from Aaron Equipment Company because the information they present is accurate, their prices fair and their customer service is the best…Highly recommend."
"This is my first time using Aaron Equipment to purchase equipment. They were easy to work with and things were done quickly and efficiently. I will be a repeat customer when the need arises. This is a trustworthy company that delivers what they advertise."
"I have purchased multiple pieces of equipment through Aaron equipment over the past 15 years. The staff has been very knowledgeable on every request & have spent countless hours ensuring that the equipment I was purchasing met my expectations."
"I have been doing business with Aaron equipment for many years. This year I had the need for some used equipment in a new business Venture. I got in touch with Ryan Davies. I could not be happier with the response and honesty exhibited by him. Dealing with them was a pleasure and everything was as represented. Fair an Honest is how I would describe them."
“Aaron Equipment was very easy to get into contact with and get a price on a un-used chiller they were selling. The process was seamless and very easy on our end and we had the equipment much faster than going out for bid on it to multiple vendors and we able to come in under budget on the project.”
"Aaron Equipment is always my first call for used process equipment. Their inventory and customer service has ensured successful project results every time. Thanks y’all!"
"I have purchased all different types of equipment from Aaron Equipment over the last 10 years and have always been 100% happy with not only the equipment but with their customer service!"
"Working with Aaron Equipment Company was as easy as it gets."
"It is a pleasure to work with AEK and I would recommend them as an equipment supplier."
"The partnership we enjoy with Aaron has helped our business to be what it is today – thank you guys!”
"I will definitely use Aaron Equipment in the future."
"Aaron’s customer service indicates that they want long term partnerships and that is something we especially appreciate."
"I really value shopping for used equipment from Aaron Equipment Company because the information they present is accurate, their prices fair and their customer service is the best…Highly recommend."
Unused- Wisconsin Oven SWH Series Model SWH-6126.5-G8 Heavy Duty Natural Gas Walk-In Oven. Temperature Rating: Maximum 800 degrees F, Normal 700 degrees F, Minimum 290 degrees F above ambient. Temperature Uniformity: +/- 10 degrees F at 700 degrees F. Chamber Dimensions: 6'0" wide x 12'0" long x 6'6" high. Overall (approximate): 10'6" wide x 13'6" long x 11'8" high. Body Construction: Tongue & groove panel assemblies featuring our patented high efficiency panel seams, 6" of 6# density, industrial board type insulation with a 1,200 degrees F service temperature rating; removable 20 gauge 304 stainless steel interior; 20 gauge carbon steel exterior; 12 gauge base and roof trim. Oven Doors: Bi-parting horizontal swing at one (1) end only. Oven Floor: Reinforced insulated floor (2" thick) with 12 gauge wheel guides, and 1/8" of flat gasket under the wheel guides tracks to be 3" wide and centered 30" with the entrance ends. Recirculation: 11,500 CFM @ 15 HP with stainless steel wheel and shaft; belt driven. Exhaust: 1,900 CFM @ 1 HP; with motorized dampers on both the fresh air inlet and exhaust outlet. Heating Equipment: Industrial air heat burner rated at 800,000 BTU per hour. Hang Rails: Stainless steel load bar supports spaced every 18" each to support 25 lbs. Watlow F4T recorder/controller and a Honeywell 4200 paper recorder, 4.3" color touch screen; graphical trending; USB port for downloading data. Utility Requirements: 208 volt, 3 phase, 60 hertz, 1,000 BTU per cubic foot at a constant pressure of 2-5 PSIG. New in March, 2024.
Manufacturer Information:
- Brand: Wisconsin Oven
- Model: SWH-6126.5-G8
- Series: SWH Heavy-Duty Walk-In Oven
- Year: New in March 2024
- Type: High-Temperature Industrial Walk-In Oven
Description:
The Unused Wisconsin Oven SWH-6126.5-G8 is a heavy-duty, high-temperature walk-in oven engineered for precision heating applications. Designed with industrial-grade insulation and efficient airflow, it provides uniform heating (+/- 10°F at 700°F) for heat treating, composite curing, powder coating, and industrial drying processes.
Built with a 6" thick high-efficiency insulated panel system, a stainless steel interior, and a reinforced insulated floor, this rugged and reliable oven ensures consistent performance at up to 800°F. It features an industrial air heat burner (800,000 BTU/hr) and a recirculation system rated at 11,500 CFM @ 15 HP, providing efficient heat distribution.
Equipped with an advanced Watlow F4T touchscreen recorder/controller and a Honeywell 4200 paper recorder, the system allows for precise temperature control, graphical trending, and data logging via USB download.
Specifications:
- Maximum Temperature: 800°F
- Normal Operating Temperature: 700°F
- Minimum Temperature: 290°F above ambient
- Temperature Uniformity: ±10°F at 700°F
- Chamber Dimensions: 6'0" W x 12'0" L x 6'6" H
- Overall Dimensions: 10'6" W x 13'6" L x 11'8" H
- Body Construction:
- Tongue & groove panel assemblies with patented high-efficiency seams
- 6” of 6# density industrial board insulation (1,200°F rating)
- Removable 20-gauge 304 stainless steel interior
- 20-gauge carbon steel exterior
- 12-gauge base and roof trim
- Oven Doors: Bi-parting horizontal swing door (one end only)
- Oven Floor:
- 2” thick reinforced insulated floor
- 12-gauge wheel guides with 1/8” flat gasket under tracks
- 3” wide tracks, centered at 30” entrance ends
- Recirculation System:
- 11,500 CFM @ 15 HP
- Stainless steel wheel & shaft, belt-driven
- Exhaust System:
- 1,900 CFM @ 1 HP
- Motorized dampers on both fresh air inlet and exhaust outlet
- Heating System: Industrial air heat burner, 800,000 BTU/hr
- Control System:
- Watlow F4T Recorder/Controller (4.3” color touchscreen)
- Graphical trending & real-time monitoring
- USB port for data download
- Honeywell 4200 Paper Recorder
- Hang Rails: Stainless steel load bar supports every 18”, supporting 25 lbs each
- Utility Requirements:
- 208V, 3 Phase, 60 Hz
- 1,000 BTU per cubic foot at 2-5 PSIG
Applications:
The Wisconsin Oven SWH-6126.5-G8 Walk-In Oven is ideal for:
- Heat Treating & Metal Processing – Stress relieving, annealing, preheating
- Composite Curing – Aerospace, automotive, and industrial components
- Powder Coating & Finishing – Curing coatings on metal and composite materials
- Drying & Dehydration – Removing moisture from industrial components
- Plastics & Rubber Processing – Post-molding heat treatment
- Electronics & Semiconductor Manufacturing – Thermal testing & component drying
Alumina Products, Aluminum, Coating, Coating Products, Curing, Heat Treating, Oven
| Model | SWH-6126.5-G8 |
| Category | Dryers - Drying Equipment |
| Subcategory | Oven |
| Chamber Length | 144 |
| Chamber Width | 72 |
| Chamber Height | 78 |
| Temperature Range - Low | 290 F |
| Temperature Range - High | 800 F |
| Power Supply Cycle | 60 |
| Power Supply Phase | 3 |
| Power Supply Voltage | 208 |
| Overall Dimensions | 10'6" wide x 13'6" long x 11'8" high |
| Year Built | 2024 |
- Aerospace & Automotive Components – Composite curing & stress relieving
- Metal Parts & Fabrications – Heat treating & tempering
- Industrial Coatings – Powder coating & curing
- Electronics & Electrical Components – Drying & testing applications
- Plastic & Rubber Products – Thermal treatment for durability
- Unused Wisconsin Oven SWH-6126.5-G8 for sale
- Heavy-duty walk-in industrial oven
- 800°F high-temperature heat-treating oven
- Industrial walk-in oven with precision temperature control
- Aerospace & automotive composite curing oven
- Large-capacity industrial powder coating oven
- 800,000 BTU/hr high-performance heating oven
- Walk-in oven with advanced process control system
- Unused Wisconsin Oven SWH-6126.5-G8 industrial walk-in oven for sale
- High-temperature walk-in oven with 800,000 BTU/hr burner
- Aerospace and composite curing oven with uniform heat distribution
- 700°F rated heavy-duty industrial oven with recirculation system
- Walk-in powder coating oven with Watlow F4T control system
- Large industrial oven with stainless steel interior and digital recorder
- High-capacity heat treatment oven for manufacturing and metal processing
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENT
View our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory