2800L (740 gal) Mueller "f" tank. 316 stainless

Used- 2800L (740 gal) Mueller "f" tank. 316 stainless inner shell, Dual 304 jackets, 2" insulation, 304 stainless cladding. Tank MAWP - 60psi @ 350F Jacket MAW - 100psi @ 350F The tank bottom actuated valve was updated/replaced by mueller in 1993 with Saunders 70v61-315-p4 tbv Have drawings from mueller. Includes lightnin vektor VKS37 agitator. Serial# R0037042201. Does not have motor.

MFR: Mueller Corp

PulsaFeeder 7440-S-AE Metering Pump – 5 HP, 230/460V, XP Motor

Used- PulsaFeeder Diaphragm Metering Pump, Model 7440-S-AE, series 40, nominally rated 8.55 gph at 330 psi, with 5 hp, 230/460 volt XP motor, Serial # 9560471-2.

Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger

Used- Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger. Approximately 745 square foot 316L stainless steel 20" diameter X 20' face to face length. 316L SS shell side rated 150 PSI @ 20 to 320 degrees F. (190) 3/4" 316L SS tubes rated 150 PSI @ 20 to 305 degrees F. 3" Process nozzles with 1" vent and drain. 3" service nozzles. NB# 3879, S/N: 06- 290. Built 2007. Weight 6150#. Missing one head

MFR: Sisterville Tank Works

Used Eirich RV-15 Mixer – 750L, 1200 kg Capacity, 75 HP Tool, 304 Stainless, Industrial Intensive Mixer

Used- Eirich Mixer, Model RV-15. 304 stainless steel product contact surfaces. Approximately 750 liter bowl. 1200 kg max capacity. 75 hp mixing tool. 10 hp pan motor. On board lubrication system with 2 hp pump. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Eirich

Used Lee 75-Gallon Tilt-Back Dual Motion Agitator – 316 SS, XP Motor, Industrial Mixer

Used- Lee Floor Mounted 75 Gallon Dual Motion Tilt Back Agitator Assembly, Model 9M, 316 Stainless Steel. Approximate 30" wide anchor style agitator. Inner bars 11" x 1.5" wide x 5/16" thick. Outer bars 11.5" x 1.5" x 5/16" thick. Driven by a 2hp, 3/60/230/460 volt, 1725 rpm XP motor, thru dodge gearbox. Has tilt mounted stainless steel frame. Serial# 17378-2.

MFR: Lee Ind

Used Conair CW1836 Thin Gauge Sheet Granulator – 75 HP, 18” x 36” Throat, Servo Feed, Built 2019

Used- Conair Thin Gauge Sheet Granulator, Model CW1836. 75 HP motor. 18" x 36" Throat size opening. (5) rotor knives. (2) bed knives. Hydraulic lift for easy screen change. Servo pull rolls for auto feed. Stand alone control panel. 3/60/460V. Built 2019.

MFR: Conair

Used Sullair Rotary Screw Air Compressor – Model 16-75

Used- Sullair Rotary Screw Air Compressor, Model 16-75. Maximum pressure rating 110 PSIG. Driven by 75 HP motor. 60,531 Hours.

MFR: Sullair

Used Hoffman 38602 Centrifugal Blower | 75 HP Industrial Air Blower

Used Hoffman 38602 Centrifugal Blower | 75 HP Industrial Air Blower. Blower is driven by a 75 hp electric motor at 3565 rpm. Blower has a 14" flanged air intake and export ports. Serial number 0484027. Requires 460 vac 3 phase electrical supply.

MFR: Hoffman

Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics

Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics. With dispersion blades and extruder screw discharge. Internal pressure: Atmospheric @ 353F shell is 7/16" thick. Jacket pressure: 125 psi @ 353F jacket is 3/8" thick. Mixer Dimensions: 32" x 32" x 25" high, approximate total capacity is 110 gallons. Extruder screw is 8" diameter driven by a hydraulic motor, and hydraulic tilt discharge are both powered by 30 HP 230/460 volts Vickers Hydraulic pumping system. Mixer Blades driven by a 25 hp US. varidrive motor, 220/440 volt. 31 to 125 RPM to chain and sprocket to give you approximately 15 to 62.5 RPM output speed on the blades. NB #1117, SN 86065. Built 1971.

MFR: J H Day

Used Retech VH34/75 Horizontal Shredder – 75 HP, 34” Feed, Vibratory Conveyor, 2” Screen, Built 2006

Used- Retech Model VH34/75 Horizontal Shredder. 5" x 34" in-feed opening, 16" diameter 44 cutter rotor with a 390 RPM rotor speed. Rotor is belt driven by a 75 HP 460V 1185 RPM motor. Two infeed rollers are powered by approximately 1 Kw SEW Euro drive motors and gearboxes. 41.5" in-feed height. 2" holes screen installed. Gravity discharge. Includes stand-alone starter / control panel and a 30' long vibratory in-feed conveyor. Model VR85/12, Serial# 8809020. No controls for conveyor. Serial# 8810010, Built 2006.

MFR: Retech

Used Retech / Vecoplan VH34/75 Horizontal Shredder – 75 HP with 30' Vibratory Infeed Conveyor

Used- Retech/Vecoplan Model VH34/75 Horizontal Shredder. 5" x 34" in-feed opening, 16" diameter 44 cutter rotor with a 390 RPM rotor speed. Rotor is belt driven by a 75 HP, 460 Volt, 1185 RPM motor. Two infeed rollers are powered by approximately 1 Kw SEW Eurodrive motors and gearboxes. 41.5" in-feed height. 2" holes screen installed. Gravity discharge. Includes stand-alone starter / control panel and a 30' long vibratory in-feed conveyor. Model VR85/12, S/N 8809020. No controls for conveyor. Built 2006.

MFR: Retech

Used Belshaw Adamatic OVEN 2020 Double Rack Oven – 275,000 BTU/hr | Natural Gas/Propane | 2 B-Style Racks | 2019

Used- Belshaw Adamatic Double Rack Oven, Model OVEN 2020. Natural gas or propane with automatic electric switch over; 275,000 btu/hr; Stainless steel construction; Heavy duty rack lift, accepts A, B, or C-styles, 46" long B-style lift, with spare lift for (2) B-style single racks; 39" wide x 75" tall door; 10" diameter exhaust, with 10" to 12" diameter adapter; Dayton 12" diameter exhaust fan; Oven is 72" wide x 62" long plus 30" long exhaust hood; Stainless steel floor insert; Natural Gas or Propane (Electronic automatic switch over). 3/60/208/240V New in May 2019.

MFR: Belshaw