Used Sweco 60" Vibro Energy Separator – Model LS60C, Stainless Steel, Single Deck

Used- Sweco 60" Vibro Energy Separator, Model LS60C, Stainless Steel. Single Deck. Driven by a 2.5hp, 3/60/460 volt motor. Includes top cover. Serial# LS60-481-54. Incomplete.

MFR: Sweco

Used Chicago Blower Size 300 Centrifugal Fan | 60 HP Industrial Blower System

Used Chicago Blower Size 300 Centrifugal Fan | 60 HP Industrial Blower System. Size 300. Rated up to 18,000 cfm @ 15.3 SP. Serial number 308227. Inlet 30" diameter with cone to 42" diameter. Outlet 32" x 23.5"" with damper. Overall size " wide x " tall x " long. Motor 60 HP. Electrical power 230/460 vac 3 phase. OAL dimensions 84" wide x 80" long x 71" tall.

MFR: Chicago Blower

Used Vecoplan RG42/60XL Shredding System – 60 HP, Double-Row Cutter Rotor, Infeed/Discharge Conveyors, OEM Controls

Used- Vecoplan Model RG42/60XL Shredding Package.15" diameter rotor with double row of 48 total cutters. Single counter knife. Powered by a 60 HP 460-volt motor through a Flender gearbox. 51" x 42" chamber opening with 1.7 KW (2.2 HP) hydraulic ram. Gravity discharge. Mounted on a 24" tall riser base. Hopper has a 89" x 80 feed opening with forklift unload rails, and has an in-feed height of 120". 3/8" holes screens installed. Machine base is 108" x 85". With original OEM PanelView Plus 1000 control panel. Includes one shredder in-feed conveyor that is 12" wide x 21' long. 2" cleats on 24" centers. Powered by a 2 HP motor thru 30:1 gearbox. Also includes 12" wide x 12' long discharge conveyor with 2" cleats on 24" centers. Powered by a 1 HP motor thru 30:1 gearbox. 460/3/60 operation. 81.2 FLA.Built 2008, Serial# 11357010.

MFR: Vecoplan

Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024

Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.

MFR: Sweco

Used Sweco Vibro-Energy Separator 60" Diameter – Model XS60Y88HSTL, Single Deck

Used Sweco Vibro-Energy Separator 60" Diameter, Model XS60Y88HSTL. Stainless steel contact parts. Single deck, 2 separation. Driven by a 2.5hp, 3/60/460 volt, 1740rpm motor. No top cover. Mounted on painted carbon steel base. Serial# 167005-A06/18.

MFR: Sweco

Used 60kW Caterpillar Natural Gas Generator – Model G3304NA, Enclosed, 3-Phase, Skid Mounted

Used 60kW Caterpillar Natural Gas Generator Model G3304NA, Enclosed, 3-Phase, Skid Mounted; 3 phase, 60Hz, 480V, 1800rpm; load tested & ready to ship.

MFR: Cat

Used Leistritz ZSE-60 GL Twin Screw Extruder – 36:1 L/D, 150 HP, Side Stuffer, Strand Dies, Screws & Spares

Used Leistritz ZSE-60 GL Twin Screw Extruder 36:1 L/D, 150 HP, Side Stuffer, Strand Dies, Screws & Spares. With (9) modular barrel sections. 114 kW / 150 HP Baumueller DC motor, 500 rpm max. screw speed, Barrels are electrically heated and internally cored for liquid cooling. Includes stand-alone Electrical enclosure/control panel (controls appear non-operational), LSB-47 twin screw side stuffer, Stand-alone pump tank/heat exchanger for barrels cooling, Two (2) Complete screw sets, segmented design with splined shafts, fully assembled, Approximately 25 pairs of spare screw elements, consisting of both flighted/conveying and mixing elements, Two (2) complete swing gate-type strand die assemblies, Three (3) or four (4) spare die plates. Numerous (approx.. 8-10) spare barrel closures & inserts Yr. 2000. Includes Allen Bradley DC Motor Drive. 480 50/60hz.

MFR: Leistritz Corporation

Used Atlas Copco Model GA45 Industrial Rotary Screw Air Compressor | 60 HP

Used- Atlas Copco Rotary Screw Air Compressor, Model GA45. Liquid cooled; rated 294 cfm at 107 psi; 107 psig max. discharge pressure; Elektronikon control panel. Driven by a 60 hp, 3/60/230/460 volt, 3550 rpm motor. 17537 load hours.

MFR: Atlas Copco

Used Leistritz ZSE 60 MAXX-36D Twin Screw Extrusion Line with Pelletizing System – 495 kW Drive – Auction Asset

Used Leistritz ZSE 60 MAXX-36D Twin Screw Extrusion Line with Pelletizing System 495 kW Drive Auction Asset. Line consists of (1) Koch Technik Feeding System & Scholz Dosiertechnik Dosing unit, (1) Leistritz Twin Screw Extruder, Type ZSE 60 MAXX-36D. (2) 60 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM. Flender Gearbox is direct driven via a 742 HP/495 kW 400volt/50cycle/3Ph motor. Free standing control panel with microprocessor and interconnecting wiring. Built in 2014 Serial# 04489, (1) BD Plast Double Screen Changer, type BDL, (1) Ettinger ERF 200 melt pump, Waterbath incl 2 siflers, Stainless steel, on legs, (1) ECON Pelletizer, type EUP 600, New 2014, (1) Tredkamp Mixing Silo, type 1C-T, Stainless steel, Volumen 10 m3. New 2007, (1) Moton Mixing Silo 14 m3 volume. on legs, control panel incl. elevator, (1) Big Bag System. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will added to the purchasing price.

MFR: Leistritz Corporation

Used Noris ZSC 60 Twin Screw Extrusion Line – 650-800 kg/hr Polymer Compounding System

Used- Noris ZSC 60 Twin Screw Extrusion line with a capacity of 650 800 kgs/hr. consisting of: Noris ZSC 60 Twin Screw Extruder, (2) 60 mm diameter screws, 40:1 L/D ratio, co-rotating inter-meshing side by side screw design, (9) heated barrels, electrically heated water cooled. Driven by a 400volt drive motor via a PIV gear box, screw speed maximum 746 RPM, (1) Ettinger Melt Pump, type ERF 200, (1) Stainless Steel Water Bath, (1) Pelletizer, (1) Control panel. Incl. additional infrastructure. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.

Used Leistritz ZSE 60 MAXX-44D Twin Screw Extruder – 60 mm Co-Rotating Extruder – Built 2018

Used- Leistritz Twin Screw Extruder, Type ZSE 60 MAXX-44D. (2) 60 mm) diameter screws. 44:1 L/D Ratio. Co-rotating. 10-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM via a Flender Gearbox is direct driven via a 400volt/50cycle/3Ph motor. Incl. control panel. Built in 2018. Serial# 04977. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.

MFR: Leistritz Corporation

Used Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88

Used- Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless steel frame with casters. Serial# US60-387-03.

MFR: Sweco