Used Brighton Corporation 49.7 Gallon Reactor – 316L Stainless Steel, Dimple Jacketed

Used- Brighton Corporation Reactor, 49.7 Gallon. 316L Stainless Steel, Vertical. 20" Diameter x 36" straight side. Removable top dished head, dished bottom. Internal rated 25 psi and Full Vacuum at 250 degrees F. 304 Stainless steel dimple jacket rated 25 psi and Full Vacuum at 250 degrees F. Openings top: (1) 4" for spray ball, (1) 4" with sight glass, (1) 3", (2) 1-1/2", (2) 1". 1-1/2" Center bottom outlet. (2) Side mounting brackets. Serial # B8432-3. National Board # 4299.

MFR: Brighton Corp

Unused Sonic Colloid Roto-Mill RM4 | 4" High-Shear Sanitary Colloid Mill (316L SS)

Unused Sonic Colloid Roto-Mill, Model RM4. 4" size. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.

MFR: Sonic

Sonic RM4 Sanitary Colloid Mill | Unused 4" High-Shear Roto-Mill

Sonic RM4 Sanitary Colloid Mill | Unused 4" High-Shear Roto-Mill. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.

MFR: Sonic

Unused Sonic RM4 Colloid Roto-Mill | High-Shear Inline Processing System

Unused Sonic RM4 Colloid Roto-Mill | High-Shear Inline Processing System. 4" size. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.

MFR: Sonic

Sonic RM4 Mobile Colloid Mill | 4" High-Shear Emulsification System

Sonic RM4 Mobile Colloid Mill | 4" High-Shear Emulsification System. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.

MFR: Sonic

Used Alloy Products 5-Gallon 316L Stainless Steel Pressure Tank – 135 PSI, Vertical

Used- Alloy Products Pressure Tank, Approximately 5 Gallon, 316L Stainless Steel, Vertical. 9' Diameter x 14" straight side. Dished top and bottom. Polished internal rated 135 psi at 20 to 135 degress F. Openings top (2) 7/8, (2) 3/8, 5 x 6 oval, no cover. Rubber skirt mounted.

MFR: Alloy Products

Used Mooney Slow-Speed Disperser – 5 HP, 18” Bowtie Blade, Air/Oil Lift

Used- Mooney Slow Speed Disperser. 1-1/2" Diameter x 48" long shaft with a 18" diameter bowtie blade. Driven by a 5hp, 3/60/230/460 volt, 1730 rpm motor. Manual speed control, air/oil lift. Pedestal mounted.

MFR: Mooney

Lee Jacketed Mix Kettle

Used- Lee 5 Gallon (20L) Jacketed Mix Kettle with Scraper Blades. Internal rated 20 PSI at 332 Degrees F. Jacket rated 90 PSI @ 332 Degrees F. No motor included. Unit has tilt out mixer, air actuator assist needs to be replaced.

MFR: Lee Ind

Used Cumberland 1456i Granulator – 75 HP Twin Shear Rotor with 68" Pull Rolls

Used- Cumberland Granulator, Model 1456i. 14" x 56" feed throat. Three (3) knife twin shear rotor with two (2) bed knifes. Rotor is belt driven by a 75 HP, 3/60/460 Volt motor. 68" wide in feed pull rolls with 5 HP D/C motor. Feed rolls are pneumatically actuated. Upper and lower feed rolls are poly covered. Pull roll hopper only. No controls included.

MFR: Cumberland

Used K & H Manufacturing Post-Type Mixer – 5 HP, Manual Height Adjustment

Used- K & H Manufacturing Post-Type Mixer. Shaft measures 1-1/2" diameter with 6" diameter housing. Housing includes (2) paddle blades with one blade measuring 18" long x 1-1/2" wide extending from bottom of housing. Mounted on frame with manual height adjustment. Driven by 5 hp, 220/440 V, 1200 rpm, 3/60Hz motor. Previously used at paint processing facility. Good condition.

MFR: K & H Manufacturing

Used Gifford Wood Model 3H-71 High Shear Homogenizer – 5 HP, 316 SS, XP Motor

Used Gifford Wood Model 3H-71 High Shear/ Homogenizer/ Disperser/ Emulsifier. Mixer is 316 stainless steel and includes stand with hydraulic jack for placement inside mixing vessel. Driven by 5 HP, 230/460 Volt, 3505 RPM, UL Explosion Proof (XP) Motor. Shaft size is 1-3/16" diameter X 46" long with 3-7/8" diameter homogenizing head. Stand includes Westward 8-Ton Hoist with manual hydraulic jack.

Buy Used Entoleter ECM Impact Mill – High-Speed Pulverizer, 3600 RPM

Used- Entoleter Centrimil Impact Mill, Model ECM. Carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom discharge. Driven by 5 HP, 220/440V, 3-phase, 60 Hz, 3600 RPM motor. Mounted on a frame. Catalog# 110778-20, Serial# 3931.

MFR: Entoleter