Used Marley Double Flow Cooling Tower | 450 Ton Industrial Cooling System (Model MHF7113)

Used- 450 Ton Marley Double Flow Cooling Tower Model MHF7113. 410-746 ton cooling capacity, based on 3gpm/ton at 95 f hot water 85 F cold water 78 F wet bulb configuration. Built 2016. Dimensions 13'-11" long x 25'-10" wide x 22' tall 41,310lbs.

MFR: Marley

Used Mueller 4,150 Gallon Stainless Steel Jacketed Tank | Brewery Fermentation Vessel

Used- Mueller 4,150 gallon Stainless Steel Jacketed Tank.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-1. Previous use was for brewery fermentation.

MFR: Mueller Corp

Mueller 4,150 Gallon Stainless Steel Fermentation Tank – Jacketed Vessel

Mueller 4,150 Gallon Stainless Steel Fermentation Tank Jacketed Vessel.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom. Serial # 164585-2.Previous use was for brewery fermentation.

MFR: Mueller Corp

Used Mueller 4,150 Gallon Brewery Fermenter – Stainless Steel Tank

Used Mueller 4,150 Gallon Brewery Fermenter Stainless Steel Tank. 97 7/16" OD x 219".Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-3.Previous use was for brewery fermentation.

MFR: Mueller Corp

Used Double Drum Dryer – (2) 42" x 120" Chrome Rolls, Hydraulic Drive

Used- Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated rolls, each rated 160 psi at -20 to 650 degrees F, serial #s 490K and 491K. National Board #s 425 and 426, built 2006, certified by PFE Rolls. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides and panel. Mounted on stainless steel end frames.

Used Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated

Used- Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated rolls. Approximate rating 100 psi at 450 degrees F. National Board# 1782-2, Certified by Beloit / Overton Machine Co, Built 1962. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides and panel. Mounted on stainless steel end frames.

Used Spray Dynamics Spray Coating System – FastBack Feeder, Liquid & Dry Applicators, SS Mix Tanks, Built 2008

Used- Spray Dynamics Spray Coating System. Consisting of: Heat and Control Fast Back conveyor feeder, Model CV-FB200A15; Spray Dynamics Soft Flight stainless steel coating drum (42" D x 96" L) w/ Model MS-III liquid applicator; Uni-Spense dry ingredient dispensing system; Tank system w/ 150 gallon stainless steel mix tank w/ agitation and 200 gallon stainless steel single wall tank w/ agitation; Control panel. Built 2008. Previously used for cereal.

Used Devine rotary vacuum dryer with 42 cu. ft. total capacity. Dryer has about 30 cu. ft. working capacity and stainless steel construction including the jacket. It has 36" diameter ribbons, 3.75" d...

Used-Devine rotary vacuum dryer with 42 cu. ft. total capacity. Dryer has about 30 cu. ft. working capacity and stainless steel construction including the jacket. It has 36" diameter ribbons, 3.75" diameter shaft and outboard bearings. Equipped with a 11" center bottom flush valve with a pneumatic actuator. It has (2) 15" manways in top with lids. The necks of the manways are jacketed. This unit is rated at 50 psi @ 300° F. National board # 775. Serial number D-11319-1. Was mounted on a raised platform. (not included). Drive is 7.5 hp 220/440 vac 3 phase. Drive is loose from unit, it was mounted to the stand. Good condition.

MFR: Devine

Used Single Drum Dryer Roll

Used- Single Drum Dryer Roll Only. Approximate 42" diameter x 120" face chrome plated roll. Rated 160 psi at 450 degrees F., serial# 3487-2, National Board# 1316-2, built, certified by Overton Machine.

Single Drum Dryer Roll Only-Used

Used- Single Drum Dryer Roll Only. Approximate 42" diameter x 120" face chrome plated roll. Rated 160 psi at 450 degrees F., serial# 3487-1, National Board# 1316-1, certified by Overton Machine.

Unused Scott TSM42156 Twin-Shaft Continuous Mixer – 5 TPH Industrial Continuous Paddle Blender

Unused Scott TSM42156 Twin-Shaft Continuous Mixer 5 TPH Industrial Continuous Paddle Blender. 42" x 156" shaft dimensions. Designed for 33 lbs/cubic foot. Rated 5 tons/hour. 5 minute retention time. Carbon steel construction. 12" x 24" inlet, 12" x 36" discharge. 120 RPM blender speed. 20 HP shaft mount gear reducer. Driven by a 20 HP, 3/60/230-460V motor. Built 2021.

MFR: Scott Turbon

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – XP Agitator – Tycon Reglass – QVF System

Used- R & M 160 Liter Italia Glass Reactor Train with 160 Liter Glass Lined Reactor. Removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at +356/-112 F internal, jacketed for 150 psi and full vacuum at +356/-112 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, internediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, reactor and receiver bottom lift/lower mechanisms, reglass tycon reactor bottom serial# 1109, national board# 650, receiver serial# 8037, national board# 423, reactor reglassed by Tycon in 2005.