Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

Commercial Stainless Steel Groen TDH-40 Kettle – 40 Qt, Self-Contained Steam

Used- Groen Stainless Steel Table Top Kettle, Model TDH/40-SP, 40 Quart Capacity. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 32385, Serial# 32385. 1/60/110 Volt.

MFR: Groen

Used Patterson-Kelley 10 Cu. Ft. 304 Stainless Steel Twin Shell V-Blender – 135 Lb./Cu. Ft. Density Rating

Used- Twin Shell (V-Blender) - Patterson Kelly 10 Cubic Foot 304 Stainless Steel. Rated maximum material density 135 lbs./cu. Ft. Has (2) 18" top charge ports and a 8" bottom discharge with a butterfly valve. Interior has milled finish. Unit is direct driven by approximately 2HP right angle geardrive with an electric brake. Has Dodge pillow block bearings. Mounted on carbon steel stand giving 48" from bottom valve to floor. Overall dimensions 91" long X 30.5" wide X 101" tall.

MFR: Patterson Kelley

Unused LACT Hydraulic Pump Unit | 200 GPM @ 45 PSI | Viking Q4127A Pump | 10 HP Motor | 3” Stainless Piping | Static Mixer, Valves & Meter | Skid-Mounted | Built 2021

Unused- LACT Hydraulic Pump Unit. 200 GPM flowrate at 45 PSI discharge pressure. 3" stainless steel piping. Includes Viking Q4127A Pump, driven by a 10hp 3/60/460v 1800rpm motor. static mixer, valves, and meter. Skid mounted. Built 2021.

IKA Works DR2000/5 High Shear Disperser 3-Stage Stainless Steel

Used IKA Works High Shear Dispersing Machine DISPAX-REACTOR, Type DR2000/5. Three-stage high shear inline disperser. Flow rate maximum 10 GPM, depending on product. Sanitary clamp, 2" inlet, 1.5" outlet, made of 316 stainless steel. Thermal jacket rated 36 psi (2.5 bar) at 120 degrees C. Driven by 10 HP, 230/460 Volt, 3 Phase, 60 Hz, 3600 rpm, Inverter duty, TEFC, Explosion Proof motor. Serial # 3778-20.

MFR: IKA Works

Used Cumberland 284 GRAN 3KN Plastic Granulator – 10 HP, 13" Cutting Chamber with 3-Blade Open Rotor

Used Cumberland Granulator, Model 284 GRAN 3KN. Approximately 10" x 12" feed opening. 13" diameter cutting chamber 3-Blade open rotor blades approximately 12" long x 2-3/4" wide x 1/8" thick. Driven by approximate 10hp motor. Serial# 425000-7644. Mounted on casters. Possible applications include granulating and size reduction of compatible plastic materials, scrap and other materials suitable for the machine's existing cutting configuration. 3/60/208 Volt.

MFR: Cumberland

Used Premier Mill ESD/V-10/5 Stainless Steel Media Mill – 10-Liter Grinding Chamber, 10 HP Drive

Used- Premier Mill Corp. Media Mill. Model ESD/V-10/5, Stainless steel. Manufactured in May 2000. 208 V power with a 10 HP drive motor and a 5 HP pump motor. In Premier's ESD nomenclature, the "10" designates the grinding chamber volume of 10 liters (2.64 U.S. gallons) rather than a batch size, since the machine is a continuous-flow mill and has no fixed batch capacity. Throughput and batch size depend on the product viscosity and the particle fineness required, with the mill paired to a feed or recirculation tank 10100 gallons for lab and pilot work, and 50300 gallons for production recirculation. Floor mounted construction and configured for high-shear mixing and dispersion with recirculation through the product loop, suitable for paints, inks, coatings, adhesives, chemicals, and specialty product formulations in laboratory, pilot, and production service

MFR: Premier

Used Stokes 33 station model 328-1 rotary tablet press. This is a rotary high speed tablet compressing machine. Tablet press has a 10 ton compression force, a 1-1/16" maximum tablet diameter, and a 1...

Used-Stokes 33 station model 328-1 rotary tablet press. This is a rotary high speed tablet compressing machine. Tablet press has a 10 ton compression force, a 1-1/16" maximum tablet diameter, and a 1-3/8" maximum depth of fill. The press is rated 1200 up to 3300 tablets/minute. Driven by a 7.5 hp 1800 rpm motor. Serial number T-664172. Press comes with many different die change parts. Requires 460 vac 3 phase electrical supply.

MFR: Stokes

Used APV Crepco liquid product temperature control system. Total 10 sq ft from all 3 stages. This is a custom made system that uses chilled and hot water to control and record product temperature. Eq...

Used-APV Crepco liquid product temperature control system. Total 10 sq ft from all 3 stages. This is a custom made system that uses chilled and hot water to control and record product temperature. Equipped with APV model Junior 3 sectioned plate and frame heat exchanger. The heat exchanger uses 34° F chilled water from an Edwards Engineering Model LSCC3A chiller. Chiller Serial # 853790. Chiller is rated at 36,000 BTU/HR. 281° F steam for hot water is supplies by outside source. Good condition.

MFR: APV

Used Sano 10” IBC Extrusion Die - Single Layer, High-Quality Film Production

Used- Sano 10" single layer blown film IBC die, 1.75" bore opening, .070 gap.

MFR: Sano

Used Film Extrusion Die - Filmaster 10” Single Layer, .070” Gap

Used- Filmaster 10" Single Layer Blown Film IBC Extrusion Die, .070 gap.

MFR: Filmaster

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot