Fabsco Shell and Tube Heat Exchanger, 299 Square Foot

Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.

MFR: Fabsco

Used 100mm Buss Kneader System with Hot Feed Extruder & Gala Underwater Pelletizer | 200 HP | 2,000 lb/hr PVC Line

Used 100mm Buss Kneader System with Hot Feed Extruder & Gala Underwater Pelletizer | 200 HP | 2,000 lb/hr PVC Line, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approximately 5.5" o.d. (140mm) hot feed extruder with 7/1 L/D, jacketed barrel driven by 75 hp motor. Includes Used #6 Gala underwater pelletizer with 12.1 ECLNBF Gtala spin dryer. Extra new die plates available at additional cost. The Buss line was last run on flexible PVC at 2000 lb/hr in August 2022.

MFR: Buss

Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed

Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.

MFR: Fitzpatrick

Used Novatech MCS-206 3-Component Blending System – Pneumatic Pump, 3 HP, Controls

Used- Novatech 3 Component Blending System, Model MCS-206. Consisting of: (1) Novatec pneumatic pump, Model UPU, driven by a 3 hp motor with filter, and multi-station panel, Serial # 12-343-0842. Includes receivers, and controls, Serial # 12-243-0177. Last used with a 2.5" extrusion line.

MFR: Novatec

Unused Alfa Laval Tri-Clover 3" 316L Stainless Y Body Shut-Off Valves

Unused Tri-Clover (Alfa Laval) "Y" Body Shut-Off Valves, Model 761-90M-29L-3-316L-34-4-3, Lot of 4. 316L Stainless steel. Molded rubber seat. 3" Port size. Air-Actuated. New in box. (Quantity of 4).

MFR: Crepaco

Used Sturtevant Sample Grinder – Model 2-10, 100-400 lbs/hr Capacity, Carbon Steel

Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170.

MFR: Sturtevant

Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel

Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.

MFR: Scott Turbon

Pre-Owned Paul O Abbe Jar Rolling Mill – 3” x 60” Rolls, 86-258 RPM

Used- Paul O Abbe Single Tier Jar Rolling Mill Enclosure, Model JRM. 3" Diameter x 60" wide rolls. Roll speed: 86 to 258 rpm, set rolls at 169 rpm. Approximate 3/4hp, 3/60/230/460 volt, motor. Sound attenuated enclosure. Mounted on fork-liftable base. Serial# A35796. Capable of being two-tier. ***THIS MACHINE IS OFFERED FOR RENTAL. ASK AN AARON EQUIPMENT PROFESSIONAL FOR MORE INFORMATION***

MFR: Paul O Abbe

Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel

Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. Touch screen operator control. Direct driven by a 412kW (approx. 550 HP) variable frequency motor, 3/60/480V. Serial# 8454. Built 2009.

MFR: Welex

Used Charles Ross HSD-3 High Speed Disperser 3 Gallon Lab Mixer

Used Charles Ross & Son High Speed Disperser, Model HSD-3. Designed for laboratory and pilot-scale mixing and dispersion. Approximate 3-gallon working capacity, vertical shaft batch type, handling viscosities up to approximately 50,000 cP. 5-1/4" Diameter disperser blade. Driven by approximately 3 HP inverter-duty TEFC motor, 230/460V, 3 phase, 50/60 Hz, with variable speed drive. Wetted parts are 304 stainless steel with painted carbon steel frame and V-belt drive. Features air/oil hydraulic lift with adjustable head. Bench or floor mounted, open vessel design. Suitable for paints, coatings, inks, adhesives, and chemical applications.

MFR: Ross Industries

Used Vacudyne Corporation tobacco conditioning unit.Fumigator. Serial # J71-53 . The unit uniformly adds or removes amounts of moisture to bulk products such as tobacco, starches, etc. This is accom...

Used-Vacudyne Corporation tobacco conditioning unit.Fumigator. Serial # J71-53 . The unit uniformly adds or removes amounts of moisture to bulk products such as tobacco, starches, etc. This is accomplished by added steam heat, evacuating using vacuum and repeating as necessary. Unit requires 130 psig steam , 460 vac 3 ph electric and 60 gpm 70f water supplies. Maximum steam temperature of 200f and a maximum of 25" hg vacuum. Unit is equipped with vacuum jet and steam condensing unit with 1 hp recirculating pump. The interior space measures 9' 3" long x 5' wide and 6' 6" tall. Unit is also equipped with hinged ramp at the door. Good condition.

Used Myers Engineering model V550/500A-3-3 vacuum mixer has a 14" diameter x 14" deep stainless steel jacketed tank that is rated for 14 psi maximum. Mixing blades are lowered/raised via air over oi...

Used-Myers Engineering model V550/500A-3-3 vacuum mixer has a 14" diameter x 14" deep stainless steel jacketed tank that is rated for 14 psi maximum. Mixing blades are lowered/raised via air over oil lift. Driven by two (2) variable speed 3 hp motors that are UL tagged for hazardous locations and require 230/460 vac, 3 ph electricity. Unit is equipped with vacuum cover but not vacuum pump. High speed agitator has a 1.25" diameter shaft with a 4" sawtooth blade. Slow speed agitator has 3 blades on bottom that extend 10" up the sides as wipers. Unit is also equipped with a safety chain for the tank. Serial no. 673

MFR: Myers