Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

IN STOCK and NEW- Paul O Abbe Model RB-265 Ribbon Blender

NEW & IN STOCK- Paul O. Abbe Model RB-265 Ribbon Blender. In -Stock .265 Cubic Foot working capacity. 289 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 63" wide x 130" long x 67.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 26 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 14,960 pounds. Approximate overall dimensions: 81" wide x 206.5" long x 94.8" high. Controls are available upon request.

MFR: Paul O Abbe

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System – Complete Pharma Line with Chiller & Granulator (2010)

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System Complete Pharma Line with Chiller & Granulator (2010). Capacity 200 kgs/hr (440 lbs/hr.). Co-Rotating, (2) 27 mm diameter side by side screws, 40:1 L/D ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. Hastelloy C-276. Driven by a 22.5HP/15 kw-400-volt 1750rpm AC drive motor via a gear box. Screw speed maximum 500 RPM. Serial# 3899, Built 2010. Includes K-Tron Unit, (3) Temp Control Units, SKA-12-W Chiller, Granulator, Electrical Cabinet, Spare Parts. Weight 1.2 tonnes. Overall dimensions: 3650 mm L x 1150 mm W x 1800 mm H. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System – Pharma Grade with K-Tron Feeders & Full Package

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System Pharma Grade with K-Tron Feeders & Full Package. Capacity 200 kgs/hr (440 lbs/hr.). Co-Rotating, (2) 27 mm diameter side by side screws, 40:1 L/D ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. Hastelloy C-276. Driven by a 22.5HP/15 kw-400-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Serial# 3778, Built 2008. Includes (2) K-Tron feeders, Control Cabinet, (3) Temp Control Units, Barrel Lift, Spare Parts. Weight 1.2 tonnes. Overall dimensions: 3650 mm L x 1150 mm W x 1800 mm H. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder – Pharmaceutical Grade 27mm Co-Rotating Extruder System

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder Pharmaceutical Grade 27mm Co-Rotating Extruder System. Capacity 200 kgs/hr (440 lbs/hr.). Co-Rotating, (2) 27 mm diameter side by side screws, 40:1 L/D ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. Hastelloy C-276. Driven by a 22.5HP/15 kw-400-volt 1750rpm AC drive motor via a gear box. Screw speed maximum 500 RPM. Serial# 3659, Built 2007. Weight 1.2 tonnes. Overall dimensions: 3650 mm L x 1150 mm W x 1800 mm H. Includes Control Cabinet, (3) Temp Control Units, Barrel Lift. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used Leistritz ZSE 27 MAXX/48D Twin Screw Extruder System with Feeders and Vacuum Package

Used Leistritz ZSE 27 MAXX/48D Twin Screw Extruder System with Feeders and Vacuum Package. (2) 1.05" (27 mm) diameter screws. 48:1 L/D Ratio. Co-rotating. 12-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM. Via a gearbox, Incl. (2) Leistriz Twin Screw side feeders, (1) Brabender feeding system, (1) Bush vacuum pump, type Mink MM 1144BC, (1) Temperature control, (1) Control panel. Previously used in a plastic lab. Overall dimensions: 3300 mm L x 1000 mm W x 2200 mm H, Weight 1 tonnes (extruder only).

MFR: Leistritz Corporation

Used 270 Cu. Ft. Stainless Steel Double Ribbon Blender – 75 HP, Center Discharge

Used- Stainless Steel Double Ribbon Blender. 270 Cubic foot capacity. Non-jacketed trough approximately 144" L x 60" W x 66" D and has a center bottom discharge. Ribbon is chain driven by a Reliance 75 HP 1785 RPM 460-volt 3-phase motor through a gearbox (presently missing). Serial# 70-202.

MFR: Unknown

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m³/h | 53.8 Barg | 270 HP | 2023

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m/h | 53.8 Barg | 270 HP | 2023. 6 cylinder, 2 stage, 1000 cubic meters per hour volumetric flow rate, max. working pressure 53.8 barg. Discharge relief valve set pressure 56.5 barg, water cooled. Complete with controls, fully automated with HMI screen and mounted on a steel skid. 270 HP, 460/3/60, 307 FLA. Serial number 113730, new in 2023. Previously used for testing a NASA system. Reported to have 47.9 run hours.

Used Thermax TAC L5 E1 Vapor Absorption Chiller – 276 Ton, 970 kW, 2019 Build, 200 Hours

Used- Thermax Vapor Absorption Chiller, Model TAC L5 E1. 276 ton cooling capacity; 970 kW; 166.5 cubic meters/hour chilled water circuit flowrate; 276 cubic meters/hour cooling water circuit flowrate; 106 cubic meters/hour hot water circuit flowrate. Components included: VFD's, HMI and sensors. OAD: 15.5' L x 7.0' W x 10.5' H. 3/60/575V. Built 2019. Reported to have 200 hours. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used 2019 SPX Marley AquaTower AQ492G1BAF Cooling Tower – 28 Nominal Tons, 2 HP Fan, Crossflow Design

Used SPX Marley AquaTower cooling tower, Model AQ492G1BAF, built 2019. Marley engineering data for the 492G configuration lists approximately 28 nominal tons of cooling capacity based on 95 F hot water, 85 F cold water, 78 F wet bulb and 3 GPM per nominal ton. Factory-assembled induced-draft crossflow design with PVC film fill, integral louvers and drift eliminators. 36" diameter fan driven by a 2hp 3/60/208-230/460v 1750rpm motor. 4" inlet and outlet connections. Overall Dimensions 72" long x 48" wide x 90" tall. Serial #10183156-A1. Possible applications include heat rejection and recirculating cooling-water service for compatible HVAC systems, process equipment, chillers, heat exchangers, compressors and other industrial or commercial cooling-water applications.

Unused 8,000 Liter 304 Stainless Steel Double Ribbon Blender – 75 HP Industrial Batch Mixer

Unused Double Ribbon Blender. 8,000 liter/approximately 282 cubic feet capacity. 304 stainless steel construction. Unit is equipped with a center bottom outlet and driven by a 75 HP, 1,140 RPM, 3 phase, 60 Hz, 575V motor through a 47.94:1 reduction gearbox. Blender is mounted on a carbon steel support frame. Built 2023.

MFR: Unknown