Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System

Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.

MFR: Denver

Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel

Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.

MFR: Carrier

Used Oberlin OPF-24 Fully Automatic Horizontal Pressure Filtration System

Used Oberlin Fully Automatic Horizontal Pressure Filtration System, Model OPF-24. Serial/configuration OPF24-165MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.

MFR: Oberlin

Used Oberlin OPF-24 Pressure Filtration System – Up to 960 GPM

Used- Oberlin Model OPF-24 Fully Automatic Horizontal Pressure Filtration System. Serial/configuration OPF24-167MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.

MFR: Oberlin

Used Bird 3600 Stainless Steel Decanter Centrifuge – 24" x 60" Bowl, 30 HP with Hard-Faced Scroll

Used Bird 3600 Stainless Steel Decanter Centrifuge 24" x 60" Bowl, 30 HP with Hard-Faced Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.

MFR: Bird

Used Bird 3600 Industrial Dewatering Centrifuge – 24" x 60" Stainless Bowl with Wear-Resistant Scroll

Used Bird 3600 Industrial Dewatering Centrifuge 24" x 60" Stainless Bowl with Wear-Resistant Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.

MFR: Bird

Used Alar Auto-Vac Rotary Vacuum Drum Filter System – 2' x 2', Model 220

Used- 2' x 2' Alar "Auto-Vac" Rotary Vacuum Drum Filter System. Drum measures 2' diameter x 2' long. Model Auto-Vac 220. Carbon steel drum. With motorized advancing knife discharge. On base with poly tank and .3 HP Lightnin Agitator drive, shaft and prop, 5 HP Atlantic Fluidics Vacuum Pump and receiver pump. Filter agitator with .3 HP drive. .5 HP drum drive gear reduced, chain driven with guard. Unit looks to be in good condition.

MFR: Alar Engineering

Used Sweco SS24Y44A3P3WCXB Stainless Steel Vibratory Screener – 24" Single Deck Separator

Used- Sweco Stainless Steel Screener, Model SS24Y44A3P3WCXB. 24" diameter. Single deck, 2 separation. (2) 6" diameter outlets. Driven by 1/3 hp motor, 1145 rpm, 460V. Serial# 953894-A08/10. Mounted on stand.

MFR: Sweco

Used Thomas Engineering Accela-Cota Coating Pan – Model 24-111, Stainless Steel

Used- Thomas Engineering Coating Pan, Model "Accela-Cota" 24-111, Stainless Steel. Approximate working capacity of 40 pounds. Serial # 24-328.

MFR: Thomas Engineering

Used Vector Freund Hi-Coater Coating Pan – Stainless Steel, 24" Diameter

Used- Vector Freund Hi-Coater Coating Pan. Stainless Steel coating chamber approximate 24" diameter x 16" deep with internal baffles. Unit includes blowers and control panel. New York Blower, Shop # C-5206-110, size 2104A05, driven by 5 hp, 3/60/230/460 volt, 3470 RPM motor, 3.5" diameter inlet, 3" outlet. Requires spray gun. Previously used in pharmaceutical application.

MFR: Vector/Freund

Used Reiter Automatik ASG300 Strand Pelletizer – 30-Knife Rotor, 10,500 lbs/hr Capacity

Used- Reiter Automatik Strand Pelletizer, Model ASG300. (30) Knife solid helical rotor, power roll feed with pneumatic tension control. Belt driven motor. Mounted on a base. Approximate rating up to 10,500 pounds per hour. Serial # 18002-3188.

MFR: Rieter

Complete Sheeting Line – 24" Cooling Stack, Puller Cutter, Trim Press & Heater

Used- 24" Vinyletech Abbottstown Sheeting Cooling Stack, Model D9060. Approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, serial# 22654, Vinyletech serial# 06181. includes Abbottstown puller cutter combo, model D9051, serial# 22952, Abbottstown trim press, model D8652, serial# 22657, 36 kw Compaheat heating system, model TC4-9-4P4 zone, 9 kw per zone, 208-230 volt, serial# 23010, 75 kva transformer.