Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...

Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.

MFR: Philadelphia

Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...

Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.

MFR: Philadelphia

Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...

Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.

MFR: Philadelphia

Unused Meridian 20,000 Gallon Stainless Steel Tank | 304SS Vertical Storage Vessel

Unused Meridian 20,000 Gallon Stainless Steel Tank. Constructed of 304 stainless steel with a vertical, single-wall design featuring a slight dished top and sloped bottom. Approximate dimensions are 162" diameter x 204" straight side. Top openings include (1) 25" manway, (1) 22" opening, (1) 3" nozzle, and (1) 2" nozzle. Side openings include (1) 25" manway, (1) 3" nozzle, and (1) 1" nozzle. Suitable for a wide range of storage applications including liquid fertilizers and agricultural chemicals, food and beverage ingredients such as syrups, edible oils, and sweeteners, industrial and process liquids where stainless steel construction and large storage capacity are required, and water or wastewater equalization and storage where 304 stainless steel offers excellent corrosion resistance and long service life.

MFR: Meridian MFG

Used Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel

Used- Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1/2" (530 mm) long x 20-1/2" (530 mm) width x 19-1/2" (500 mm) deep jacketed bowl. Jacket estimated rated for 75 psi (5 bar). Sigma style blades with a speed of 17/21 RPM. Tangential. 6" (150 mm) dia. screw shafts. Standard packing glands. Counter balanced top cover. Screw product discharge. Belt driven thru gearbox by a 22.5HP/15 kw-380V/50cycle/3Ph-1475 RPM motor. Safety belt cover. Screw product discharge by a 11.25HP/7.5Kw-380volt/50cycle/3Ph motor. Frame mounted. Overall dimensions: 85" (2600 mm) long x 52" (1600 mm) width x 5.9" (1800 mm) high. Weight 3 tonnes. Serial # 193951. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Werner & Pfleiderer

Cataract Steel Industries Shell and Tube Heat Exchanger

Used- Cataract Steel Industries Shell and Tube Heat Exchanger, Model SG-33006-SETT, Approximate 21.2 Square Feet. Carbon steel shell rated 60 psi at -20 to 300 degrees F. (27) 3/4" diameter x 48" long 316L Stainless steel tubes rated 100 psi at -20 to 300 degrees F. Openings: (2) 6", (2) 2", (2) 3/4". Side lug mounted. National Board# 4639, Serial# 33006, built 2013. No top or bottom heads, Flange cut on one side.

Luwa 21.6 Sq. Ft. 316L Stainless Steel Thin Film Evaporator

Used Luwa Model NL3-300/2200/HT vertical thin-film evaporator with 21.6 square feet of heat-transfer surface and 316L stainless steel construction. The evaporator measures 12" in diameter x 96" long in two sections and features a three-star Type L rotor, radial separator, mechanical seal, conical bottom with 2" diameter discharge, and 12" diameter vapor outlet. The internal chamber is rated for full vacuum at 365 F, and the jacket is rated for approximately 150 psi at 365 F. Driven by a 7.5 horsepower belt-drive motor rated for 230/460 volts, 3 phase, 60 hertz, and 1,720 revolutions per minute. Support ring is missing. Possible applications include evaporation, concentration, solvent recovery, stripping, and separation of suitable heat-sensitive, viscous, chemical, food, pharmaceutical, and specialty process products.

MFR: Luwa

Used Morton Machine Plow Mixer, Model FKM600D | 600 Liter (21.18 Cu Ft) | 321 Stainless Steel | 50 HP | Pneumatic Discharge | Side Chopper Provision

Used- Morton Machine Plow Mixer, Model FKM600D, 321 Stainless Steel. Total capacity 21.18 cubic foot (600 liter), working capacity 14.13 cubic foot (400 liter). Approximately 790mm (31.1") diameter x 1240mm (48.8") long mixing chamber. Internal plows, driven by approximate 37kW (50hp) motor, thru gear box, 14:1 ratio. (2) 400 (15.75") x 450mm (17.7") side access doors. Openings top: 350mm (13.78"), 250mm (9.84"). 450mm (17.7") Center bottom outlet with 300 (11.8") x 240mm (9.45") sandwich type pneumatically operated door. Provision for side choppers. Mounted on frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Morton

Used - Buss Paddle Rotary Vacuum Dryer (6000L) – Stainless Steel, Industrial-Grade

Used- Buss Paddle Rotary Vacuum Dryer. (6000 liter) 211 cubic foot working capacity. 316L stainless steel contact parts. 1600mm (62.992") diameter x 4100 mm (161.417") long, dished ends. Rated internal vacuum jacket 2 bar. Openings: top 18", (2) 4-3/4" sightglass; side (2) 11" x 15" inspection doors. Center plug valve outlet 9-1/2". Bare shafted. Driven By 11 Kw 6 RPM Fixed Gear Motor Drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Buss

Used Niro Soavi NS3037-H High-Pressure Homogenizer – Up to 13,500 PSI with Alfa Laval Feed Skid

Used- Niro Soavi Homogenizer, Model NS3037-H, 2507 Stainless Steel. Approximate capacities 3170 gallons per hour at 1500 psi to 211 gallons per hour at 13,500psi. Driven by a 40 hp, 3/60/230/460 volt 1190 rpm motor. Serial # 2437, built 1993. Includes a feed skid with an Alfa Laval GHPD positive displacement pump, Model SRU-4NLS, Serial # 02-5-10008A, driven by a 5 hp, 3/60/230/460 volt, 1725 rpm gear motor, ratio 4.5 to 1, (1) L.J. Star bubble trap, (1) Allegheny Bradford heat exchanger. Shell & tubes rated 150 psi at -20 to 350 degrees F, Serial # 10923-1-1, built 2002, and (2) control panels. Both pieces mounted on casters. Rebuilt by GEA in 2022.

MFR: Niro

Used Walker 316L Stainless Steel Reactor, Model SP | 800L (211 Gal) | 50 psig | Agitated & Jacketed | NB#1646

Used- Walker 316L Stainless Steel Reactor, Model SP. 800L (approx. 211 gallons) capacity. Vessel internal rated 50 psig and full vac at 275 degrees F. Jacket rated 50 psig MAWP at 275 degrees F. -20 degrees F at 50 psi MDMT. Dish top and bottom. 2" tri-clamp center bottom outlet. Openings: (2) 2" top tri-clamp, 4" sight glass, 8" drive, 16" top manway w/ 4" sight glass in cover. Off-center top entering 1725 RPM, .75 HP Lightnin agitator. Has spray ball. Mounted on (3) stainless steel legs. NB #1646. Built 1989. Our Freight specialists can assist with any trucking and customs documents to ensure a smooth transition.

MFR: Walker

Pfaudler Glass Lined Reactor, 2120 Gallon. Used.

Used Pfaudler Glass Lined Reactor, Type E8000. Working capacity 2120 gallon (8000 liter). Type 3115 blue glass. Internal 2000mm diameter X 3300mm over dished ends. Internal rated 90 psi (6 bar) / FV at 392 degree F (200 degree C). Mild steel jacket 767 litre capacity, rated for 90 psi (6 bar) at 392 degree F (200 degree C). Mounted on (6) lugs. Reportedly unused since reglass.

MFR: Pfaudler