Ross Model LDM-2 Double Planetary Mixer, Rocket Propellant / Fuel.

Used- Charles Ross and Son Laboratory Double Planetary Mixer, Model LDM 2, Zirconium 702 construction, Zirconium 702 product contact construction for highly corrosive or aggressive materials. 2 Gallon jacketed mixing can. Internal rated 150 psi at 340 degrees f. Jacket rated 100 psi at 340 degrees f. Vacuum rated cover. Driven by a 1/2 hp, 460 volt xp motor with AC VFD controller. Hydraulic lift with .5 hp, 230/460 volt xp pump. Unit mounted on stand with control panel. Mixing can certified by Astro Cosmos, Serial# 65795-2, National board# 1813, Ross serial# 72684, built 1998.

MFR: Charles Ross

Used Apex Type 583 Stainless Steel Double Cone Blender – 2 Cubic Foot (58 Liter) Capacity

Used- Apex Double Cone Blender, Type 583. 2 cubic foot (58 liter) capacity. Stainless steel construction. .5 HP, 115V drive with 19:1 direct drive speed reducer. Previously used for agricultural products.

MFR: Apex

Used Van Dorn Model G-200 Plastic Grinder / Granulator.

Used- Van Dorn Model G-200 Plastic Grinder / Granulator. Mild steel construction. Chamber measures 6-1/2" X 6-1/2" with 14" x 6" feed throat. Includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. Driven by 2 HP, 230/460 volts, 3-phase, 60 Hz, 1140 RPM motor. Mounted on mild steel frame on casters. Serial# 283-B.

MFR: Van Dorn

Used WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT

Used- WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT Gravity. Designed and built to receive pre-processed conditioned" mud sludge flow and remove a major portion of the water (Filtrate) from the mud. The average design flow of the 2.2 meter unit is 250 gallons per minute (gpm). Unit functions to dewater sludge by entrapping a uniform thin layer of conditioned sludge between two endless, porous synthetic belts. The feed box receives conditioned mud sludge flow from the upstream sludge conditioning system and distributes it in a uniform layer over the belt as the belt moves the sludge layer forward from feed box onto the gravity zone. The sludge moving through gravity zone is initially dewatered as gravity pulls the filtrate from the sludge layer through the porous belt to the catchment pan below. The wedge zone entraps the gravity thickened sludge forming a sludge sheet between the two belts. Filtrate (liquid extracted from the sludge) is pressed from the entrapped sludge cake as it traverses the length of the wedge zone to the Doctor blades. Mechanical pressure is applied to the belts to force a major portion filtrate from the sludge as it traverses the machine experiencing ever increasing pressure along its path to the dried sludge discharge point. Dry weight is 35,000 lbs; Serial # WBP-2.2M-25.0-004, New in 2017.

Parr 4561 Mini Reactor System 300 mL 350°C 3000 PSI Used Laboratory Reactor

Used 2023 Parr 4561 mini bench top reactor system, 300 mL, rated 3000?psi at 350?C, complete with A2590HC11EB heater/cooler block and Parr 4848 controller, designed for high pressure lab scale reaction and hydrogenation work. Cylinder 2.5" I.D. x 4" deep. Rated 3000 psi at 350 degrees C. With Model A2590HC11EB HTR/Cool ALUM BLK. Includes model 4848 reactor controller. Serial# 4560-2304-156654. Manufactured in 2023 and removed from lab/process service; reported in very good condition. Photos, data plate, and any available documentation are recommended for buyer verification

MFR: Parr

Used Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned

Used-Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ratio of 10.73:1 and is direct driven by a 60 HP D/C motor with Saftronics SCR control. Manual screen changer mounted on the extruder discharge. Includes panel with controls. Reported to be reconditioned.

MFR: Gloucester

Used Gloucester 2.5" Single Screw Extruder – 32:1 L/D, Air-Cooled & Vented

Used- Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control panel and 5-hole strand die

MFR: Gloucester

Used Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor

Used- Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is supplied loose. Includes two (2) new / rebuilt screws. 460/3/60. Serial# 36736/25.

MFR: Gloucester

Used Stokes BB2 Rotary Tablet Press – 27 Stations, High-Speed Tablet Production

Used- Stokes Rotary Tablet Press, Model BB2. 27 Stations. Keyed upper punch guides, 3/60/220/440, rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons.

MFR: Stokes

Used Stokes BB2 Rotary Tablet Press – 27 Stations, 1,400 Tablets/Min

Used- Stokes Model BB2 Rotary Tablet Press. 27 Stations. Rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons. Keyed upper punch guides. 3/60/220/440 Volt.

MFR: Stokes

Used Glatt 78L Stainless Steel Tote – 20.6 Gallon, 2.7 Cubic Feet

Used- Glatt Tote, 78 Liter (20.6 Gallon), 2.7 Cubic Feet, Stainless Steel. No valve or cover.

MFR: Glatt

Used Pfaudler 20-Gallon Reactor – 316 Stainless Steel, Vertical | Pressure-Rated Industrial Reactor with Anchor Agitator

Used- Pfaudler Reactor, 20 Gallon, 316 Stainless Steel, Vertical. Approximately 18" diameter x 18" straight side, dished top and bottom. Internal rated 60 psi or full vacuum at 350 degrees F, carbon steel jacket rated 90 psi at 350 degrees F. Anchor style agitator blade, driven by a Pfaudler drive, size 2.5 TWV, model SV-48270C-AKC, serial #25032X, ratio 5 to 1, set up for hydraulic drive, connection for drive broken off and missing, no power pack. Openings: top, 1", 1-1/2", (3) 2", (2) 4" hand holes; 2" center bottom outlet. Mounted on 3 carbon steel legs. National Board #28175, serial #E369-1492.

MFR: Pfaudler