Siemens STC-SV Two-Stage Gas Compressor Skid – 1479 kW, 9 Bar Rated

Siemens STC-SV Two-Stage Gas Compressor Skid 1479 kW, 9 Bar Rated. Rated power 1479 KW. Rated capacity 12,327 m3/hour. 0.2 barg inlet pressure. 3.7 discharge pressure 9 bar (135 PSI) maximum allowable discharge pressure. Driven via a Flender TX45/6C1gearbox by an 1800kW motor, gas filter, lube oil system, acoustic enclosure, air circulation electric fans, Frame mounted. Complete with controls and additional infrastructure. New year 2014. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Myers Tri-Shaft Disperser-Mixer-Emulsifier – 36” Diameter, Hydraulic Lift, Refurbished

Used- Myers Tri-Shaft Disperser-Mixer-Emulsifier Mixer, Model V550/500A-15-7.5-25-1151. Top dished head,approximately 36" diameter. Does not include mix tank.Center sweep agitator with side and bottom scrapers. Top offset entering high speed disperser. Top offset entering intermediate mixer. Air over oil hydraulic lift. Single hoist design. Control panel with (3) ABB variable speed drives. Refurbished by Dantco, Model DTS-25HS-15LS-7.5BL, Serial #031218.

Used Evoqua J-Press 800G32 Filter Press – 313 Sq. Ft., 100 PSI, Built 2019

Used-Evoqua Water Technologies J-Press Model 800G32-29-15SYLW automatic sidebar filter press. Approximately 313 square feet of filtration area, 15 cubic feet chamber volume, (29) 800 mm x 800 mm gasketed co-polypropylene (CGR) filter plates, 29 chambers, and 32 mm cake thickness. Rated for 100 psi maximum feed pressure and 3,700 psi hydraulic clamping pressure. Features a monolithic welded sidebar frame, 2" center feed, 1-1/2" four-corner discharge, automatic plate shifter, Siemens Simatic S7-1200 PLC with HMI touchscreen, and 1 Phase, 60 Hz, 110-120V controls. Suitable for sludge dewatering and solid-liquid separation in municipal and industrial wastewater, chemical, mining, food and beverage, and metal finishing applications. Serial # F009641, Built 2019.

Used Atlas Copco Oil-Free Scroll Air Compressor, Model SF-11. 40.3 cfm; 113 psi max pressure. Driven by a 3505 RPM, 15 HP motor. Built 2005. 31,856 hours. Includes 240 gallon air receiver tank.

Used- Atlas Copco Oil-Free Scroll Air Compressor, Model SF-11. 40.3 cfm; 113 psi max pressure. Driven by a 3505 RPM, 15 HP motor. Built 2005. 31,856 hours. Includes 240 gallon air receiver tank.

MFR: Atlas Copco

Used Fitzpatrick FitzMill DKASO6 – Stainless Steel Hammer Mill with Screw Feeder & Explosion Proof Motor

Used- Fitzpatrick Fitzmill, Model DKASO6. Stainless steel construction. Screw feeder with hopper. 15 HP explosion proof (XP) motor. Portable base on casters. Includes separate Control panel on casters. Serial# 11497.

MFR: Fitzpatrick

Used Carver 3888.1D10A00 Hydraulic Press – 15 Ton, Manual Operation

Used- Carver Four Post Manual Hydraulic Press, Model 3888.1D10A00. 15 Ton Capacity, 5817psi max system pressure. Platens: 6" x 6". Daylight opening: .75" to 18". Stroke 6". Includes floor stand. Serial# 3888-083.

MFR: Carver

Used Myers Tri-Shaft Disperser-Mixer-Emulsifier – 100 Gallon, Stainless Steel

Used- Myers Tri-Shaft Combination Disperser-Mixer-Emulsifier, Model V550/500EH-15-25, with approximately 100-gallon (375-liter) jacketed 304 stainless steel mixing vessel measuring 30" diameter x 36" straight side with dished top, flat bottom, 14 psi jacket rating, and internal vacuum rating. Equipped with three explosion-proof variable-speed drives totaling 55 HP: 15 HP three-wing anchor agitator with side and bottom scrapers, 25 HP high-speed paddle blade, and 15 HP third-shaft drive without mixing element. Motors are 3-phase, 60 Hz, 230/460 volt, with the anchor motor rated at 1765 rpm. Dual-post mounted with hydraulic lift pump. Serial #977. Suitable for high-viscosity mixing, dispersing, and emulsifying applications involving adhesives, sealants, inks, coatings, caulks, gels, creams, pastes, and pigmented dispersions.

MFR: Myers

Anderson Duo Expeller Press. 9”x 5’ variable speed screw feeder

Used- Anderson Duo Expeller Press. 9"x 5 variable speed screw feeder with 2HP motor and drive. 15HP vertical gear head motor with roller chain drive and safety guard. Vertical discharge head with segmented worm shaft and breaker bolts. Heavy duty horizontal main gear case with new herringbone precision gear, integral pinion plus helical gear & pinion. 50 HP direct connected main motor @ 1200 RPM. Manually operated choke adjustment. Extra heavy duty thrust bearing for thrust unit T-53. Stainless steel splash guards with inspections doors. Includes new: bearings and seals; Integral water-cooled main worm shaft; 33" long drainage cage with diamond bars, keeper knife bars, pressure bars, spacers, and shims; 3" special oil conveyor with drive and 3/4HP motor. Unit sandblasted, primed and painted. 3/60/460V. Motor Starters and Control Panel are not included.

MFR: Anderson

Used Cumberland FX1018 Granulation System with Airveyor, Cyclone & Blower – 15 HP Industrial Plastic Granulator (2022)

Used- Cumberland Granulation System, Model FX1018. Serial# FX1018-22012. 10" x 18" feed throat. 3 knife open rotor with two bed knives. Offset cutting chamber. 15 HP 230/460-volt motor. Granulator & blower are setup for 230-volt operation. Insulated flex feed in-feed hopper and body panels. 4" OD airveyor discharge. Mounted on casters. System includes Sterling 4002FD blower, size 6 cyclone, stand, filter head with bags. and lot of connecting pipe. 3/16" holes screen is installed. Built 2022.

MFR: Cumberland

Used Irwin Chesaw Granulator – Model CH-LH 28.7-04, 15 HP with Auger Discharge

Used- Irwin Chesaw Granulator; Model CH-LH 28.7-04. 5" x 33" Rotor Cutter, 15 hp, 208-230/460 volt, 1760 rpm, Fan Cooled 10:1 gearbox. Lincoln Auto-Lube System. Evacuated by a 4" Auger Discharge System. Approximate 3/8" Holes Screen. Mounted on Casters. Starter and Controls for Blower, Auger System and Siemens Micromaster 440 Variable Speed Drive Unit for Granulator Rotor Speed. Also Includes 5 hp; 208-230/460 volt 3460 rpm Blower with Steel Impeller, OK100 (4") Outlet, Lab Test Machine.

MFR: Irwin-Chesaw

IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender.New.

NEW & IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender. In -Stock .15 Cubic Foot working capacity. 18 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 24.4" wide x 48.9" long x 28.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 10 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 60 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 35.5" discharge height. Approximate weight 1,870 pounds. Approximate overall dimensions: 41.1" wide x 86.6" long x 86.6" high. Controls are available upon request.

MFR: Paul O Abbe

Used Krauss Maffei Peeler Centrifuge

Used- Krauss Maffei Peeler Centrifuge, Model HZ40. Material of construction 316 stainless steel (1.4580va) on product contact area. 15.6" (400mm) Diameter bowl. 3000 rpm. Approximately 11 hp (7.5 kw) drive motor. Mounted on stand. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Krauss Maffei