Used Applied Extracts Supercritical CO2 Extractor – Model AE 2 x 25L

Used- Applied Extracts Supercritical CO2 Extractor, Model AE 2 x 25L Extraction module with appropriately scaled tanks, electric band heaters, separator tanks, primary heat exchanger module, temperature-controlled transfer lines, PLC control system & supplementary pumps. 250 lbs/day per machine (material and process dependent; 16L liquid CO2 storage tank and condenser heat exchanger; (2) x 25 liter 2-tank design that enables continuous extraction from one vessel during loading/unloading of material from the other vessel and consumes approximately 50% less CO2 than 1-tank designs when machine is operated with SOP included); 1.SL/min Lewa high flow rate diaphragm pump; Maximum discharge pressure 4350 psi; 7.5 HP 3-phase 230V motor with VFD control; New in 2019. Power requirement: 230V-240V 3 phase 60 Hz 50A

Used APV Crepaco 500-Gallon Stainless Steel Liquifier – Dual Agitation with 75 PSI Jacket

Used- APV Crepaco Stainless Steel Liquifier, Approximately 500 Gallon. Vessel has an atmospheric internal design with jacket rated 75 psi at 350 degrees F. Equipped with a 7.5 HP top mounted drive for sweep agitation, and a 25 HP bottom entering high speed agitator. Dish top, cone bottom. Approximate dimensions 60'' diameter x 36'' straight side, with an 18'' conical bottom. National Board # 9015, serial # K1050, built 1995.

MFR: APV/Crepaco

30 TPD ASU with NLU Plant

Used- 30 TPD ASU with NLU Plant designed & supplied by Cosmodyne USA in 1995. Argon purification unit non-cryogenic (H2 used for O2 removal). Power 1,361 kW. Main products; Liquid Oxygen (LOX) purity 99.6% O2 Liquid Nitrogen (LIN) purity 5 ppm O2 Liquid Argon (LAr) purity 99.999% Ar. Main equipment; Main air compressor; Ingersoll Rand Nitrogen compressors; Ingersoll Rand Expansion turbines; ACD Pre-purification unit; Cosmodyne Refrigeration units Coldbox; Cosmodyne Control system Siemens PCS7; ASU had been in operation since commissioning in 1996 and was stopped in Q3 2023 due to commissioning of new ASU. Refurbished rotor assemblies for air compressor available as spare. Refurbished spare motor available that can be used for air or nitrogen compressors. ASU major turnaround maintenance required before restart. The plants expansion turbine, nitrogen & main compressors, pre-purification, refrigeration units and all other machinery are in good condition, and the plant itself is in fully working and operational condition. Additionally, the control panel is modified to the latest PCS-7M Siemens Control System. Plat equipment: (3) Centec main air compressors; (2) ACD turbines; (1) Jalal cooling tower; (3) cooling water pumps; (3) Copland refrigeration systems; (1) Cosmodyne purification skid; (1) Cosmodyne argon purification skid; (1) Cosmodyne cold box; (1) Cosmodyne Control Room and LV Power distribution panels (containerized); (3) Servomax O2 analyzers; (1) Teledyne N2% analyzer; (1) Teledyne hydrogen % analyzer; (1) Horiba PPM CO2 analyzer; (1) Cryogenic Batch tank (12000Sm3 Liquide Oxygen); (1) Cryognic Liquid Oxygen transfer pump.

Used Arol EURO VPA 3-Head Rotary ROPP Capper with Elevator (30mm, 2019)

Used- Arol Model EURO VPA, 3 Head Rotary ROPP Capper, Set on 30mm. Left to right operation. Includes elevator. Built 2019

MFR: AROL

Used AROL Euro PK Va 8-Chuck Rotary Capper

Used AROL Euro PK Va Eight-Chuck Rotary Turret Capper. Stainless steel construction, currently set for 33 mm plastic caps, with capacity up to 15,000 bottles per hour. Requires a drive motor and 240V, 3-phase power. Two additional chuck sets and a cap sorter for conversion to 33 mm aluminum ROPP and RO caps are available separately. Built 1995. Serial #3681. Possible applications include applying compatible closures to beverage and other bottled products.

MFR: AROL

Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls

Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls. Max Film width: 26" x 12" Max bundle height. Set up for trayed products. Can run clear or print registered film. Allen Bradley PLC controls. 3/60/460V. OAD: 26'L x 68"W x 6'H.

MFR: Arpac

Used Arpac Automatic Tray Bundler – Model 107-20 for Juice Box Packaging

Used- Arpac Model 107-20 Automatic Bundler. Operates by taking a single lane of product and forming it into multipacks. Last ran juice boxes 6 pk 13.5" long x 6.5" high x 9.75" wide (individual box 3.25" W x 6.75" L x 6.5" H). Allen Bradley 5/03 PLC. Elec: 3/60/460V 40amps. Rated 38 Cycles per minute. Built 2007.

MFR: Arpac

Pre-Owned Arrowhead S-Curve Conveyor – 3” Wide Plastic Belt

Used- Arrowhead S" Curve Table Top Chain Conveyor. Approximately 3" wide plastic belt. Approximately 21" long infeed into a 90 degree turn into a 9" long section into a 90 degree turn into a 21" long discharge end. Currently 45" from belt to floor. Mounted on adjustable carbon steel legs with casters. Carbon steel frame, belt side rails. Driven by a 1/2 hp, 90 volt, 1750 DC gear motor with a Penta DC motor speed controller.

MFR: Arrowhead

Used AS&E Model M75 Automatic Inline Powder Auger Filling System | Servo-Driven Filler

Used- AS&E (Automation Supply and Engineering) Automatic Inline Powder Auger Filling System, Model M75. Servo-driven auger filler. Includes 16 gallon hopper. Control panel with Yasakawa servo drive, PLC, Red Lion model G306A HMI. Designed for top-mounted filling applications. 3/60/240V.

MFR: ASEA

Used Autobag FAS Sprint Pre-Made Pouch Packaging System with Printer – 900”/Min

Used- Autobag Pre-Made Pouch Packaging System, Model FAS Sprint. Has Accutech Autofulfillment Sprint Printer System with Zebra ZT410 print head. 60" wide load area, 6" pass-through. 1.5 to 4.0 mil bag thickness. Bag thickness: 2" - 24" wide; 3" - 18.75" long. Up to 900" per minute (bags per minute determined by bag size). Up to 15 pounds per bag with support conveyor. Autobag has Allen Bradley panelview plus 1000 HMI, A/B PLC, A/B Kinetix 2000 drives. Zebra printer system has Allen bradley panelview plus 1000 HMI, A/B CompactLogix L23E PLC. Stainless steel construction. Mounted on casters. Includes Riso 3110 ComColor printer.

MFR: Autobag

Buy Used Autobag Pre-Made Pouch Filler – Accutech Sprint Printer, Up to 15 lb Bags

Used Autobag Model FAS Sprint Pre-Made Pouch Packaging System. Has Accutech Autofulfillment Sprint Printer System with Zebra print head. 60" wide load area, 6" pass-through. 1.5 to 4.0 mil bag thickness. Bag thickness: 2" - 24" wide; 3" - 18.75" long. Up to 900" per minute (bags per minute determined by bag size). Up to 15 pounds per bag with support conveyor. Autobag has Allen Bradley panelview plus 1000 HMI, A/B PLC, A/B Kinetix 2000 drives. Zebra printer system has Allen bradley panelview plus 1000 HMI, A/B CompactLogix L23E PLC. Stainless steel construction. Mounted on casters. Includes Riso 3110 ComColor printer.

MFR: Autobag

Used Automated Packaging Systems Autobagger AB 255 One Step Wide Bagger & Printer

Used- Automated Packaging Systems (Autobagger) Model AB 255 One Step Wide Bagger and Printer. Capable of speeds up to 30 bags per minute. Has a bag size range: 4" - 16" (width) x 5.5" - 27" (length) x .049" - .15" (bag thickness). Pass-through: 4.625" - 6" Includes Ergocon large bag shaker shelf and printer. Built in diagnostics, Automtaic bag threading, Bag deflator

MFR: Autobag