Used Collette Gral 600 High Shear Mixer – 600L | 50 HP | Stainless Steel | Pneumatic Discharge | Built 1990

Used- 600 liter Collette High Shear Mixer, Model Gral 600, stainless steel product contact surfaces, 600 liter capacity, non jacketed mixing bowl with pneumatic plug valve discharge, approximately 50 hp main mixing blade, with chopper, hydraulic bowl lift with pump, HMI panel and control panel, built 1990.

MFR: Collette

Used GEA Collette Gral 75 High Shear Granulator – 75L | 304 Stainless Steel | Hydraulic Bowl Lift | Controls

Used- GEA Collette High Shear Granulator, Model Gral 75, 304 Stainless Steel. 75 Liter maximum capacity. 304 Stainless steel 21-1/2" diameter x 15" deep bowl with hemispherical bottom. Stationary flat top. Top entering 3-blade mixer and 2-tier high speed mixer. Hydraulic power pack for raise and lower of product bowl. Openings: top 4-3/4", 3-1/4", 4" for agitator, 2-3/4" for agitator. 3-1/2" side bottom outlet. Includes control panel. Serial# 79MG7506.

MFR: Collette

Used Columbia FL-10 Floor-Level Case Palletizer – 10 CPM, 48"x52" Pallet Support

Used- Columbia Case Floor-Level Palletizer, Model FL-10. Low level case palletizer, Model FL-10-RH-AB-0502. Unit is capable of speeds up to 10-cases per minute (loaded onto pallet). Capable of accepting pallets up to 48" x 52". Floor-level palletizer with compact 60 square feet footprint. Includes discharge/infeed conveyor. Allen Bradley PLC. Operator HMI panel. 3/60/480V.

MFR: Columbia

Used Columbia FL100 Low-Level Case Palletizer – 12 CPM, 3000 lbs Load Capacity

Used- Columbia Case Palletizer Model FL100 Low level. Full case palletizer is rated to 12 cases per minute, depending on materials and application. Case size range: up to 22" Length; 16" Width; 18" Height. Load capacity: up to 48" Length; 48" Width; and 65" Height with skid. The weight capacity is up to 600 lbs per tier, and 3000 lbs per load. This Columbia Palletizer is equipped with an empty pallet magazine that accommodates pallets from 40" x 40" to 48" x 48", with powered roller case in feed conveyor, orientation and layer former, pallet loading section with pusher bar and discharge conveyor. Control panel has A/B PLC and safety guarding.

MFR: Columbia

Used Comadis C85 Automatic Plastic Tube Filler with High Frequency Sealer – Up to 80 Tubes/Minute

Used- Comadis Model C85 Automatic Automatic Plastic Tube Filler With High Frequency Sealer. Capable of speeds up to 80 tubes pre minute (depending on application. Has cassette tube loader, tube cleaning and print registration. Stainless Steel agitated product hopper with cover. and agitator, water cooling for sealing jaws, product agitator, positive shut off nozzle, bottom up fill, Three sealing jaws (2 X Hot Jaws, and 1 X High frequency), Emboss coder, tube trimming device, auto eject, safety guards. 3/60/220V. With bulk empty tube feeder. Requires one bottom base side cover.

MFR: Comadis

Used COMAT PS150.35.2 Pasteurizer – 15,000 LPH Industrial Dairy Pasteurization System (2018)

Used- COMAT Pasteurizer, Model PS150.35.2. Rated 15,000 liters/hour (approx. 3,300 gallon/hour). Approx. 4 HP. 3/50/480V. Built 2018. Serial# 002761. Previously used for cheese.

Used Combi 2-EZ-SB Case Erector & Bottom Taper – Automatic Carton Former with AccuGlide Tape Head (Up to 12 CPM)

Used- Combi 2-EZ-SB Case Erector Bottom Taper. Case size range: (min) 6" long x 4 1/2" wide x 4 1/2" high, (max) 20" long x 16" wide x 18" high. OEM rated speed up to 12cpm. AccuGlide tape head. Allen Bradley Micrologix controller. Mounted on Zambus AC-1000F leveling casters. 1/60/240V.

MFR: Combi

Used Conflex CWM-160 Horizontal Lap Sealer – Up to 200 PPM

Used- Conflex Horizontal Lap Sealer, Model CWM-160. Has a 16" seal bar for speeds up to 200 packages per minute. Has a packaging size range of 3" to 36" in length, 2" to 15" in width, and 1/8" to 5" in height. Can handle films up to 34" and maximum roll diameters of 13". Includes Modular infeed system. Allen Bradley PLC controls. Last running various snack foods. 3/60/440/460/480V.

MFR: Conflex

Used Baker Perkins TruClean Wire Cut & Filler Block System | 48” Servo Cookie Production Line

Used- Baker Perkins Wire Cut and Filler Block, Model TruClean. Complete with dies and 48" wide cutter. Includes Baker Perkins 48" wide serco sugar screen, 48" wide servo jelly topper, and one 48" wide servo cookie folder. utilizes 48" wide belt conveyor with bar belt winder and one single lane Compass Tray Flow denester with extended belted magazine feeder. system includes (2) Markem Imaje 4020 series ink jet case coders. Has optional oscillating knife attachment for cutting system. Serial# PC15009. Built in 2016. Has Allen Bradley PLC controls, servo drives and color touchscreen operator HMI. 3/60/480V.

MFR: Baker Perkins

Used Modular Multistage Continuous Processor Debranner – 8” Diameter, 5-Stage, 304 Stainless (Pilot Plant)

Used- Modular Multistage Continuous Processor Debranner. 8"diameter, 5-stage, 304 stainless, with drives, valves, and controller. (3) stages have double-ribbon constant-volume mixing impellers, (2) have screw impellers. (5) variable-speed impeller drives, 3 reversible. (2) Carolina Conveying rotary valves. Acrison feeder. Honeywell multi-channel programmable controller. Shells are 8" sch 40 pipe. Rulon seals and bearings. Suspension lugs on each module not shown in drawing. Built 2007. Previously used in a pilot plant debranning corn. Currently crated and ready to ship.

Used Cosmos Kabar 15000FS RF Sealing Clamshell Blister Sealer – Industrial Packaging

Used- Cosmos Kabar RF Sealing Clam Shell Blister Sealer, Model 15000FS. Last running 5 - 6 cycles per minute. Sealing head 20" x 30". 10 kW power output. HF Output: 15KW Frequency MC: 2712. Serial 15K470 3/60/480 Volt.

MFR: Cosmos

Countec Model CT-CG-120 Desiccant Inserter – For Bottles 30–100mm Diameter

Used Countec Model CT-CG-120 Automatic Cannister Desiccant Feeder. Capable of speeds up to 120 CPM (depending on application). The machine feeds single or multiple canisters into a bottle with output up to 120 containers/minute. Has a Bottle range: Diameter 30mm to 100mm; Height 40mm to 200mm. Currently has change parts for 1 gram. and 2/3 gram change parts (2/3 gram are same diameter). No reject station.

MFR: Countec Co