Stock No.:
53993001Bonnot Co. 12" Extruder – 40 HP Jacketed Grooved Barrel Industrial Screw Extruder
Used- The Bonnot Co. 12" Extruder. 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height approximately 41-1/2". Mounted on painted carbon steel frame with 4 legs. Serial # B3269. S. O. B6669. Date 8-16-93. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Bonnot
Stock No.:
53993002Bonnot Co. 12" Industrial Extruder – 40 HP Jacketed Barrel Screw Extruder (2000)
Used- Bonnot Co. 12" Industrial Extruder 40 HP Jacketed Barrel Screw Extruder (2000). 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height approximately 41-1/2". Mounted on painted carbon steel frame with 4 legs. Serial # B3269. S. O. B6669. Date 8-16-93. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Bonnot
Stock No.:
54437003Used Vivtek LSD-H1500F/T Spray Dryer | Lab Scale Spray Drying System 1500 ml/hr
Used- Vivtek Instruments Spray Dryer, Model LSD-H1500T. 1500 ml H2O/hour evaporation rate. Two-fluid nozzle w/ needle, 1/1.5mm atomizer. 12" diameter x 16" length drying chamber. 5" diameter x 20" length cyclone. 80-280 degrees C (176-536 degrees F.) inlet gas temp., 50-120 degrees C (120-248 degrees F.) outlet gas temp. 3,000 W heater. 200 cfm airflow. 50/60 hZ, 230V. Built 2022.
Stock No.:
54654001Unused 2023 KWS Manufacturing 72' Industrial Screw Conveyor System – 12" & 14" Carbon Steel Bulk Material Handling Conveyor
Unused KWS Manufacturing Industrial Screw Conveyor Bulk Material Handling System. Consists of: 12" and 14" diameter x 72' long carbon steel screw conveyor sections with horizontal and inclined conveying sections; Structural support framing; Motors and drive components; and loose installation parts. 13' discharge height. Variable screw speed. Built 2023.
MFR: KWS
Stock No.:
54687038Used Twin stainless steel 12" diameter x 128" long hollow screw dryer. Twin screw dryer could be used to heat or cool product. Twin screw dryer trough is jacketed and insulated. The trough measures ...
Used-Twin stainless steel 12" diameter x 128" long hollow screw dryer. Twin screw dryer could be used to heat or cool product. Twin screw dryer trough is jacketed and insulated. The trough measures 142" long x 20.5" wide x 16" deep. The trough top has a 13.25" x 16" inlet, 6" x 9" inlet, and grating on the rest of the top. The trough bottom has a 6" diameter flanged outlet with gate valve. Hollow screws are driven by a 1.5 hp 1140 rpm motor through a reducer down to 6.9 rpm. Hollow screw dryer sits on a carbon steel frame with catwalk and ladder. Overall dimensions are 75" wide x 205" long x 120" tall. Requires 230/460 vac 3 phase electrical supply.
Stock No.:
54687078Used Straight Line vacuum belt filter, model 1 X10, 12" wide x 124" long filter area, with rubber belt, on board vacuum system with 3 stainless steel receiver tanks, poly pumps and 25 hp liquid ring ...
Used Straight Line vacuum belt filter, model 1 X10, 12" wide x 124" long filter area, with rubber belt, on board vacuum system with 3 stainless steel receiver tanks, poly pumps and 25 hp liquid ring vacuum pump with controls, serial# SL32085. Shipping dimensions are 65"w x 195"l x 85"h.
MFR: Straight Line
Stock No.:
54687134Used Buhler AG continuous intensive mixer model MOXJ-27/200. Serial number 20762199. Constructed of 316 stainless steel. It is designed with a screw infeed, then a 12" dia. x 73" long mixing chamber....
Used-Buhler AG continuous intensive mixer model MOXJ-27/200. Serial number 20762199. Constructed of 316 stainless steel. It is designed with a screw infeed, then a 12" dia. x 73" long mixing chamber. The rotor has 8 rows of 40 each 1.5" wide x 2.125" long x .375" paddles. The inlet and outlet are roughly 7 3/4" x 4 3/4". It has a side access door that is nearly the length of the mixing chamber. It is driven by a 17.3 KW TEFC motor. 460 vac 3 ph electric power required. It can mix up to 4,000 kg/hr. Overall dimensions are 104" long x 48" wide x 37.25" tall mounted on its stainless steel stand.
MFR: Buhler Inc.
Stock No.:
54032001Used Kason Double Spiral Ribbon Blender – 12.6 Cu Ft Stainless Steel Mixer
Used Kason double spiral ribbon blender, stainless steel construction. 12.6 cuft working capacity based upon 75% fill / 95 gallons. Non jacketed trough about 35" x 32" x 26" deep. Single 3 1/4" diameter shaft with inner ribbon approx. 1 5/8" wide x 3/8" thick and outer ribbon approx. 1 1/4" wide x 3/8" thick for efficient axial and radial mixing. Driven by 4 HP gearmotor, 3/60/230/460 V, with center bottom outlet. Top bolt on cover includes handhole with hinged cover, vent, and inlet. Suitable for blending dry foods, chemicals, and other powder or granular materials, subject to buyer validation. May be used by Dry food and ingredient plants. Chemical/pigment producers. Plastics compounders.
MFR: Kason
Stock No.:
45053317Used Gemco Slant Cone Blender – Model 120 Cubic Foot
Used- Gemco Slant Cone Blender, Model 120 Cubic Foot. Stainless Steel. Approximate 30" straight side x 80" diameter. 38" top cone, 54" bottom cone. 18-1/2" Manway no cover, 12" center bottom outlet. Driven by a 20 hp 3/60/230/460 volt, 1770 rpm motor through a gearbox 16:1. Includes a 3 hp motor. Mounted on Carbon Steel stand. Missing small gear, valve and guards.
MFR: Gemco
Stock No.:
53143001Unused Andritz Rotary Triple Pass Industrial Dryer – 10' x 30'
Unused- Andritz Rotary Triple Pass Industrial Dryer. First pass is 304 Stainless Steel, Second and third pass are carbon steel. 10' diameter x 30' long. Never installed. With running gear and trunnions. Requires the following: Heat source, Belt drive, Gearbox, and motor. These are not included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Andritz
Stock No.:
53143002Unused Andritz Industrial Rotary Triple Pass Dryer – 10' x 30' Horizontal System
Unused- Andritz Industrial Rotary Triple Pass Dryer, Horizontal. First pass is 304 Stainless Steel, Second and third pass are carbon steel. Approximate 10' diameter x 30' long. Never installed. With running gear and trunnions. Requires the following: Heat source, Belt drive, Gearbox, and motor. These are not included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Andritz