Unused Paul O. Abbe BM-223 Ball Mill – Stainless Steel Industrial Grinding Mill

Unused Model BM-223 all-stainless-steel ball mill featuring a 2 tapered cylinder for full discharge and a split, hinged clamshell dry discharge housing. The cylinder measures 40 inches in diameter by 44 inches long inside the shell, with an internal finish of 32 RA (180 grit polish) and a shell thickness of 5/8 inch. The cylinder and product-contact surfaces are constructed of 304 stainless steel. Welded lifter bars terminate 1.5 inches from the ends, with welds laid down and ground to a minimum 1/4 inch radius and finished pit-free. The total mill volume is 32 ft (234 gallons), with a dry working volume of 8 ft (25% of total). The unit includes a 13.25 inch by 14.75 inch rectangular cover hatch frame welded into the side of the mill, a stainless steel grinding cover contoured to the inside radius, and a stainless steel dry discharge cover with 0.25 inch slots. The dry discharge housing fully encloses the mill cylinder to capture and direct solids to a chute or hopper, utilizing the patented 2 taper for full discharge (US Patent 10,086,379, Oct 2, 2018). The clamshell housing design incorporates stainless counterweights and stainless steel construction, with a nominal 60 chute/hopper below the mill and a 12 inch square bottom opening. Housing product-contact surfaces are 304 stainless steel with a 32 RA (180 grit polish) finish. Discharge height is 48 inches from hatch to floor. Additional features include a sliding UHMW cover on top of the housing. The mill drive is an SEW hollow bore, 20 HP TEFC motor rated for 230/460 volt, 3-phase, 60 Hz operation, providing a nominal cylinder speed of 24 RPM. The system is supported by two welded A" frame stands with box-style extensions for added height, constructed of carbon steel and coated with Sherwin-Williams Tile Clad epoxy. Overall dimensions are 138 inches high by 105 inches long by 64 inches deep.

MFR: Paul O Abbe

Friedrich Industrial Ovens (Qty 2) – Process Heating Ovens Lot

Qty (2) Friedrichs Oven (Parts located at Rick's Shop and main Oven located at a rigging company) *ONLY 1 CONTROL CABINET & STAINLESS STEEL EXHAUST GOES WITH LOT*

New Sweco 30” Diameter Screens – Lot of Vibratory Separator Screens (Various Mesh Sizes)

New/ Unused Sweco Parts. Lot of 30" Diameter Screens with various mesh sizes.

MFR: Sweco

Used Flottweg Z4D/4-454 Decanter Centrifuge | Solid Bowl 316SS Wastewater Centrifuge

Used- Flottweg Z4D/4-454 Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3500 rpm, single lead conveyor with welded hardfacing. Feed pipe, lubrication system, adjustable liquid plate dams, Approx 30 KW (40.2 HP) main drive motor, coupling, frame/casing, vibration isolators, safety guards. (1) Control panel, (1) Hydraulic unit, (1) 20 container, on wheels. Previously used in a wastewater treatment application. Our freight specialists can assist with freight and customs documentation to help make a smooth transfer.

MFR: Flottweg

Used Press Technologies 120-WT Twin Wire Wedge Thickener | 10’ Belt Sludge Dewatering System

Used- Press Technologies Twin Wire Wedge Thickener, Model 120-WT. 10' wide belt. Uses (2) 40 HP dual press drive motors. Utilizes (2) 12'' wide filtrate drain troughs. Pulp is discharged through 25 HP screw conveyor. Includes all associated electrical components, transformers, pumps, motors, and valves.

MFR: Press Technology

Used Stainless Steel Powder Hopper – Vacuum Transfer Feed System

Used Powder Hopper, Stainless steel, last running vacuum powder transfer.

Rheem Air Conditioner Model RH1P4221STANJA – 208/240V Single Phase AC Unit

Used Rheem Air Conditioner, Model RH1P4221STANJA. Unit rated for 208 / 240 volts, single phase, 60 Hz, with nominal current draw of 7.0 amps.

Used PTI Trident 6500 Sheet Extrusion Line – 6.5" 500 HP High-Output Plastic Sheet Production System

Used- PTI Trident Sheet Extrusion Line, Model 6500. 6.5" screw diameter. 36:1 L/D. 500 HP, 1800 RPM main drive. With Flender gearbox; PTI model H6018 sheet takeoff system; Revolution Roll stand; EDI 54" W dies; Sandvik 60" stainless steel belt, water cooled dual zone cooling system; pull rolls; trim saws (capable of max. thickness of 1.25"); Vulcan automatic sheet-stacker (capable of .25-.75 thickness, up to 120" length); dust collector; granulation equipment. Titan PLC control system. 3/60/460V. Built 2006.

MFR: PTI

Used- Cumberland Granulator, Model 284 GRAN 3KN, Serial# 425000-7644.

MFR: Cumberland

Used- Mikro- Pulsaire Fabric Filter.

MFR: Mikro Corporation

Used CAT Solar Turbines Centaur 40 Natural Gas Turbine Power Package – Approx. 3.7 MW

Used- Cat Solar Turbines Turbine Package. Approximate output of 3.5 MW per unit/Approximately 7 MW total. Natural gas powered. Consists of (2) Solar Turbine Model Centaur 40; Exhaust systems; Gas-fired burner systems; Associated electrical infrastructure. Configured for venting or integration with steam generation systems. Serial# HG85083 and HG85093. Reported approximate 30,000 operating hours.

MFR: Solar

Unused Lannon 25,000 Gallon Carbon Steel Horizontal Storage Tank – 11' Diameter x 35'3" Long

Unused- Lannon Horizontal Tank, 25,000 Gallon. Carbon steel construction. 11' diameter x 35'3" long. Top manway. Side mounted ladder. Mounted on saddle. Built 2017.