Used Ferro Tech Roll Compactor. Model WP-30-5-5 – Industrial Powder Compacting

Used- Ferro Tech Roll Compactor. Model WP-30-5-5. (2) 12" diameter x 5" wide rolls, horizontal axis, stacked vertically, twin cigar-shaped roll face (~3/4" wide x 21/4" long). Rolls compressed by a top mounted hydraulic cylinder, local hydraulic hand pump controlled. Rolls driven through a Hansen gear reducer by a 20 hp 3/60/230-460 volt motor. Compacting rolls screw fed from the side, feeder includes screw, small hooper with auger, gear and motor drive. All components base mounted on steel base with 3' high leg supports.

MFR: Ferro Tech

Used APV Spray Dryer 3PSBD 58 – 316 Stainless Steel, 35-120 kg/h Capacity

Used- APV Spray Dryer, Model 3PSBD 58, 316 Stainless Steel. Installed unit including heating elements, filter, controls. Drying chamber size 58, approximate volume 21.73 m3. Production rate: Due to test more kinds of nozzles and different conditions, we oscillated in powder production rate form 35 to 120kg/h. Inlet temperature main drying air: 0-600 degrees C ( We often used max. inlet temp. 420 C). Maximum outlet temperature 140 degrees C. Includes Herding dust collector, cyclone and blower. Dimension 4200 x 2250 x 2300mm (LxWxH). Gross weight: 1880kg, Net weight: 1580kg. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger.

Used- Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger. Stainless steel. 3 Ft2 (0.28 m3) heating surface area. Design pressure 450 PSI (30 bar), Working pressure 225 PSI (15 bar) at 375 deg F (190 deg C). Complete with control panel and additional infrastructure. Previously used in a dairy application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

COMAT M22TR Mozzarella Cheese Molding Machine – 2500 kg/hr, Pre-Hardening Heads Included

Used- COMAT Mozzarella Molding Machine, Model M22TR. Rated 4400-5500 lbs/hr (2000-2500 kg/hr). Includes (2) 8oz and (2) 16oz molding; Components included: pre-hardening heads; water chilling unit; CIP System. OAD: Approximate 6' H x 10' W (not including CIP/water chiller). 3/50/220V.

Used Dinies UV-C Seed Disinfectant System – Model Jumbo Naiopur 1 – 99.9% Disinfection – 625W UV-C – Built 2021

Used- Dinies Technologies UV-C Seed Cleaning Disinfectant System, Model Jumbo Naiopur 1. Up to 99.9% disinfection; 625 W UV-C power; 1920 W lamp power; (1) UV section; 1200mm L x 800mm W (approx. 47.2" x 31.5") disinfectant zone size; 900mm (35.5") working height. 60/110V. Built 2021. OAD: 96.2" L x 47.3" W x 49.9" H. Previously used for hemp seeds.

Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. used.

Used- Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 2900 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 400-690/3/50-60 main drive motor & gearbox. Back drive system. Mounted on a stand with 4 legs. Control panel. Previous used in an olive oil application .Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Industrial Thermal Oxidizer with PLC Controls & Venturi Scrubber – Griffith, 2.5MM Btu/hr

Unused- Griffith Consulting Thermal Oxidizer/Quench/Venturi Scrubber System, Natural Gas, Horizontal. Burning Capacity 2.5MM Btu/hr maximum burner capacity, 1450 degree F operating temperature. Exhaust Stream: 1500 scfm air, 1.4kg/hr Combustible Compounds, 750 scfm at 500 to 600 degrees F from cold auger furnace, 750 scfm at 900-1000 degrees from hot auger furnace. VOC destruction efficiency 98%. Control panel with PLC/HMI, flame safeguard, high temp limit switch. Hot gas Quench. Venturi Scrubber. Sump Tank. 20HP blower. New and delivered: June 2023.

Unused Stainless Steel S-1 Arc Filter Screen for Wet End Equipment – 1.3 m² Filtration

Unused- Stainless Steel S-1 Arc Filter Screen for Wet End Equipment. Filtration area 1.3 m2. Cleaning water volume 1.7 L/S. 316L SS Screen 704mm wide x 1820mm long x 0.05mm. 304 SS Pulp Feed Inlet Head, 316L SS Screen Plate, 304 SS Shell and Washing Device, Seam Width 50um. 6" Inlet, 6" fines outlet, 10" overs outlet. (2) Clamp-on cover (front and back). Control with Siemens Logo! 12/24 RC PLC. Mounted on (4) legs. Serial# 2022-01-1-0301. Built 2022. MFG - Shandong Tianli Machinery.

Used – Clark Centrifugal Compressor Model C/T 20341, Size 2M – 5089 CFM, 9 Impellers, w/ GE 1750 HP Motor

Used- Clark Centrifugal Compressor, Model C/T 20341, Size 2M. 9 Impellers. Carbon Steel. 5089CFM inlet capacity, 9100 rpm maximum continuous speed. 315 degrees F maximum operating temperature, 225psi inlet pressure and 270psi discharge pressure. 8", 12" Top Openings. Western Gear Box 1-5.1111:1 Ratio. Repaired by Dresser-Rand in 2006. Serial# 2-9-2610. Includes GE Custom 8000 Induction Motor Rated 1750hp 3/60/4000v 1786rpm, with enclosure.

MFR: Clark

Used – Steel Fab Horizontal Carbon Steel Pressure Tank – 40" x 96", 150 PSI, 2008

Used Steel Fab Horizontal Carbon Steel Pressure Tank 40" x 96", 150 PSI, 2008. Approximately 40" diameter x 96" straight side. Dished heads. Rated 150psi at -20 to 400 Degrees F. 16" diameter manway with cover, (2) 2" top connections. Head thickness .211, shell thickness .250. Part# 134-474SE. National Board# 520261, Serial# CRN.H9097.5C.

Used – Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid – 24" Fan, 30 HP Motor

Used Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid 24" Fan, 30 HP Motor. Aluminum Plate-Fins. Serial# 1207-B10733. 24" diameter fan, 4" Inlets/Outlets. Includes Universal Silencer, Model URBY 4, driven by a 30hp 3/60/230/460v 1750rpm motor. Birkett WB400 Safety Relief Valves. Mounted on Carbon Steel Frame.

MFR: XChanger

Used – Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid – Dual Units, 24" Fan, 400 HP Motor

Used Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid Dual Units, 24" Fan, 400 HP Motor. Aluminum Plate-Fins. 24" diameter fan, 8", 2" Inlets/Outlets. Includes Silencer rated 1.75 BAR, driven by an Approximate 400hp 3/60/460v 3575rpm motor. Birkett 4P6H411422/DS Safety Relief Valves. Mounted on Carbon Steel Frame. Includes Control Panel Skid on Carbon Steel Frame.

MFR: XChanger