Used Industrial Hemp Dryer for Sale – IEC Thermo 3000S, 3000 lbs/hr, Gas-Fired

Used-IEC Thermo Model HEMP 3000S high-efficiency multi-phase continuous hemp dryer rated for up to 3,000 pounds/hour wet hemp feed at 70% moisture, with final moisture of 10% or less. Multi-phase system combines flash drying for rapid initial moisture removal with fluid-bed drying for final drying and stabilization. Approximately 2-3 minute drying time with biomass temperatures of approximately 130-140 F maximum. Rated for 220 HP and 8,000,000 BTU/hour, operating on LP/propane or natural gas with approximately 88 gallons/hour LP or 8,000 cubic feet/hour natural gas consumption. Includes metered feed-in conveyor/hopper, feed-out auger and connecting conveyors. Recommended feed particle size approximately 0.25-1". Advanced PLC/MCC controls include touchscreen HMI, data logging, remote access and single-button startup/shutdown. Approximate minimum footprint 30' x 45' x 25' with 36,000-pound total system weight. Possible applications include continuous low-temperature drying of hemp biomass and other temperature-sensitive agricultural products.

MFR: IEC

Union Single Screw Extruder Pelletizing Line for Rigid Recycled Plastics

Used- Union Pelletizing Line, type/model. 120 L/D 42 with a capacity of 300-500 kg/hr. (660-1100 lbs/hr). consisting of: (1) Union single screw extruder, type ?120 L/D 42. 4.68" (120 mm) dia. screw Electrically heated, Air cooled. Driven via a gear box by a 147 KW DC variable speed motor, (1) OMP PREALPINA hydraulic screen changer 11.7" (300 mm) dia, new 2013, (1) Atmospheric degassing system, Drying system, Control panel. New 1998-2013. Suitable for recycled material of grinded rigid plastic materials PE, PP, PS, ABS. Plastics Equipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Union

Officina Meccanica Prealpina Single Screw Pelletizer – 80–110 kg/hr for Rigid Plastics

Used- Officina Meccanica Prealpina SRL Single Screw Pelletizing Line, type/model T.60 L/D 35-Vent with a capacity of 80-110 kg/hr. (176-242 lbs./hr.) recycled grinded rigid plastic materials PE, PP, PC, PS,ABS, ABS/PC, PA, (1) Single extruder 60 mm dia single screw incl. rigid materials dosing unit (1) Die head-spaghetti, (1) Filter Cresta 80 mm dia.(1) Hydraulic screen changer semi-automat without interrupting the extrusion, (1) Degassing pump, (1) Cooling water bath, (1) Sheer pelletizing unit, type SGS 100, (1) Control panel and additional infrastructure. Reported refurbished. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Buy Used Cherry Burrell Tank – Industrial Storage & Processing

Used- Cherry Burrell Tank, Stainless Steel, Vertical. Flat open top. Provision for side entering clamp on agitator, no agitator. Bottom outlet. Mounted on (4) legs. Serial# E-227-92.

MFR: Cherry Burrell

Used Bertoli Giotto PX32011 High Pressure Pump – Stainless Steel | 3/60/460V | Baby Food Grade Application

Used- Bertoli Giotto Series Model PX32011 Stainless Steel High Pressure Pump. Last used in baby food nutritional operation. 3/60/460V

Used Storage Bin, 304 Stainless Steel, 600 gallons

Used- Storage Bin, 304 Stainless Steel, Approximately 600 gallons, Vertical. Approximately 47" diameter x 76" straight side, 32" long cone. Dish Top, Coned Bottom. Openings top: 16" manway with (2) 1-1/2", 1" threaded openings on flange, (2) 4" with sight glass, 2-1/2" side top opening. 16" Diameter center bottom outlet. Side lug mounted.

Title: Used Crown Iron Works Model 48 Milling Ring Flash Drying System? | Industrial Drying System

Used- Crown Iron Works, Model 48, Milling Ring Flash Drying System. It was designed and used for food-grade orange pulp with 17,000 Lbs/Hr capacity but the plant can be used for a wide range of applications in various industries including: Drying food products such as grains, cereals, fruits, vegetables, herbs, and spices. Pharmaceutical ingredients, intermediates, and final products Drying various chemicals, including powders, granules, and crystalline materials Drying minerals and mining products such as ores, concentrates, and mineral powders Animal Feed Drying and processing environmental materials, such as sludges, biomass, and waste products. System designed for drying of powers, filter & centrifuge cakes, and slurries where a discrete and fine end product is desired. The Milling Flash Dryer is basically a low energy jet mill, that uses jets of low-pressure air to encourage inter particle collisions between pieces of feed material. These inter particle collisions break up the feed material in the dryer with no moving parts in the dryer or airstream. The dryer is in the shape of a torus, or donut that is broken up into 2 basic areas: (1) Manifold & Milling area; (2) Classifier. The ideal feed material for the Flash Dryer is a crumbly and free flowing cake that breaks up readily when it enters the drying air stream. The feed material enters the recirculating hot air upstream of the first nozzle, with the centrifugal forces generated by the air concentrating the material in the area above the nozzles. Particle-to-particle collisions begin immediately, deagglomerating the material before hard agglomerates can form. A tremendous amount of surface area is created allowing evaporation to occur quickly, thereby depressing air temperature in a very short period of time. Centrifugal forces are generated by the recirculating gases within the dryer, forcing the larger particles to the peripheral walls. Finer material is displaced towards the inside radius of the dryer where the classifier outlet is located. Fine product exits the dryer along with the exhaust gas vapor. Larger particles or agglomerates are recycled to the nozzle area dryer for further de-agglomeration and drying.

MFR: Crown Iron Works

Continuous Belt-Style Dryer – Propane/Natural Gas, Low-Temp, 40ft Long, 2020

Used- Large Capacity Commercial Food / Hemp/ Agricultural Belt Style Continuous Dryer; dryer body measures 8 feet wide by 8 feet tall by 40 feet long with additional loading conveyor belt 8 feet wide by 17 feet; UL approved electrical circuits, heater and heater controls; software is US written and supported; 480 three phase power; 24 hour run cycles; multipurpose quick change burners; Variable temperature burners to 50,000 BTUs; max dry at 180 degrees; Drying cycles with propane or can be changed to natural gas; has been modified to dry at substantially slower speeds to increase yield and limited diminishing effects of Turpines and other desirable nutrients from hemp or other plants.. Built new in 2020. Like new condition with only 40 hours of set up and run time. As of listing, expert set up and dial in time available, can assist in shipping. Make offer. The unit was last used for drying industrial hemp but is also suitable for a variety of agricultural, food, and industrial applications. Guoxin

Used Alfa Laval Membrane System with Ultrafiltration (UF) – 130 m³/h Permeate Flow

Used-Alfa Laval Membrane System with Ultrafiltration UF, Permeate flow rate 130 m3/h (570 gpm) per Vessel, Design average flux of 30 l/m2h, Spiral feed spacer of 30 mil. (2) Vessels each pair with a common feed line and the ability to share on CIP System.

MFR: Alfa Laval

Used Shibo YGM-75 Roller Mill – 22 kW Motor, Carbon Steel | 160 RPM Industrial Grinder

Used- Shibo Manufacturing Model YGM-75 Roller Mill. Driven by 22kw (29.5hp) motor. Carbon Steel. 160 RPM rotor speed.

US Centrifuge; Model A262. Used.

Used- US Centrifuge, Model A262; Capable of running up to 40 gallons/minute; Bowl volume 4 Gallons; Maximum Bowl speed 2500 RPM; Bowl diameter 18"; Max "G" Force @ OD 1600 x one gravity; Maximum Operating temperature 160 degrees F; Maximum Particle size 1/4"; Feed Pressure 5 PSI @ 40 gpm; Stainless Steel bowl; unit housed in a 8'x10' container; 50" Long x 34.25" Wide x 50" High (without stand, approximately 90" with stand); Approximately 3,000 lbs (5,000 with container); Last used for manure separation pilot project.

MFR: US Centrifuge

Used Anhydro Spray Dryer, Type 111 AK Series | 66–132 lbs/hr | 304 Stainless Steel | Cyclone, Slurry Tank, Pump & Controls | Ceramic Application | Built 1995

Used- Anhydro Spray Dryer, type 111 AK Series. Capacity 66-132 lbs/hr. (30-60 kgs/hr.) end product. 304 stainless steel on product contact parts, fluid atomizer type nozzle. Incl. (1) Cyclone, (1) 115-liter (30-Gallon) slurry tank with agitator, (1) Seepex Model 006- 12 Progressive cavity pump, (1) Electric burner, (1) Control Panel. Complete with mezzanine and additional infrastructure. Previously used in a ceramic application. New 1995. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Anhydro