Leistritz Lab Sheet Line

Used-Leistritz Lab Sheet Line, Includes the following- Leistritz Extruder, Model ZSE27 MAXX-40D. 29.8 Kw Main Drive, 1200 rpm Screw Speed. 320 Hours. (4) Schenck Feeders. (2) AEC Chilling Units. (1) Sterlco Unit. (1) Water Trough. Calendaring Web Handling Stack System (Roll Stack OS2):Web Alignment (Pull Roll 2 NIP, OS3"):Rewind Unit. (3) Flat Line Roller Conveyors. Fabric Rack holder. MAAG Pelletizer. Built in 2018.

MFR: Leistritz Corporation

Spray Drying Plant Rica-Tec(Anhydro) Used

Used- Rica-Tec(Anhydro) Spray Drying Plant consisting of (1) Rica Tec(Anhydro) Spray Drying tower, 304 Stainless steel. Centrifugal Atomizer, type 18D-320-FH 150,. (XXXX kg /hr.), Output powder capacity 1-1.2 tonnes/hr. (4) Stainless steel cyclones, (1) Heating system steam/electrical, (1) Blower for air supply, 4500 kgs, (1) Heat recovery system, (1) Blower for exhaust, 6000 kgs, (1) Rica Tec (Anhydro) Fluid Bed Dryer, Capacity 2 tonnes/hr. Stainless steel, (1) 2-Deck Screen/Sifter, Stainless steel. (1) Bag filter. Controls. Complete with sensors, valves, pumps, I-beam structure, stairways, additional infrastructure and support. New 1994. Previously used in a Soya oil powder application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Anhydro

Used Great Western QA Series In-Line Circular Sifter and Enclosure. Approximate 24" diameter. Approximate 4 sieves. Top inlet. Bottom outlet. Mounted inside frame.

Used- Great Western QA Series In-Line Circular Sifter and Enclosure. Approximate 24" diameter. Approximate 4 sieves. Top inlet. Bottom outlet. Mounted inside frame.

MFR: Great Western

Montgomery Wood Hog Grinder, Model: 57PMKC

Used- Montgomery Wood Hog Grinder, Model: 57PMKC. Infeed Opening: 51" x 21", Wear Liners: 3/4" AR plate in the upper feed area Discharge: Bottom, 66" x 22" Opening Bearings: 4-15/16" Spherical-Roller type Current Screen Size: 2" round (various screen sizes can be used) Rotor Assembly: approx. 22" Diameter x 59" Long Hammers (Teeth): Set of (19) Anvils: Set of (10) Large and (9) Small Guard Cover(s): V-Belt-drive. Recommended to use 150 hp motor (not included) Recommended RPM: 1200 RPM. Upper Infeed Hopper included.

MFR: Montgomery

Used Stainless Steel Sanitary Vibratory Scale Feeder – 132” x 24” Dimple Pan | Rotary Scale Feed | Poultry

Used-Stainless Steel Sanitary Vibratory Scale Feeder; Dimple pan measures 132 inches long X 24 inches wide X 10 inches deep; Infeed height 36 inches; Discharge height 32 inches; Overall dimensions are 132 inches long X 34 inches wide X 43 inches high; Last used to feed a rotary scale doing chicken breasts.

Used Waukesha Cherry-Burrell Thermutator – Model 624DE | 400 PSI | 400°F | Sanitary Heat Exchanger | Dairy Grade

Used- Waukesha Cherry Burrell Thermutator Model 624DE; Product 400 PSI, 400 deg F; Media 250 PSI, 400 deg F; complete with start/stop controls; Overall dimensions 72 inches wide X 72 inches long X 30 inches high; Last used in a dairy application.

MFR: Cherry Burrell

Unused LPMIE SCFE-300L CO2 Extraction Unit – High-Pressure Supercritical Extraction

Unused -LPMIE CO2 Extraction Unit; Model SCFE-300L; Includes: extraction kettle, separate kettle, CO2 high pressure pump, entrainer pump, cooling system, CO2 basin, exergy transfer system, purification system, flowmeter, temperature control system, safety protection device; can be used for the extraction of the material at high pressure and suitable temperature (solid or fluid), modifying the separator conditions to analyze the dissolved substances to achieve the separation purpose.

Unused Stancor S3000HH Submersible Dewatering Pump – 30HP, 4” NPT Discharge

Unused - Stancor High Head Submersible Dewatering Pump, Model S3000HH. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused Stancor S3000HH High Head Submersible Dewatering Pump – 30HP, 500 GPM

Unused - Stancor Model S3000HH High Head Submersible Dewatering Pump. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused Supercritical CO2 Fluid Extraction Machine – 150L Dual Kettles

Unused Supercritical Co2 Fluid Extraction Machine; Maximum extraction pressure: 40MPa; Maximum separation pressure: 20Mpa; Extraction kettle volume: 150L x 2; Extraction temperature: normal temperature ~ 75 C; Maximum CO2 flow: 1000L / h adjustable; Includes the following: Refrigeration device; Temperature control display system; Pressure control display system; Safety protection device; Carrier tank; Purifier; Mixer; Heat exchange device; Storage tank; Plunger pump with a flow rate of 1000L/ h and 10L / h; Extraction tank; Separator; Electric control cabinet; Valve; Pipe fittings and cabinet rack. System is crated and ready for shipment.

Unused Supercritical CO2 Fluid Extraction Machine – Industrial Cannabis/THC Extractor

Unused- industrial Supercritical CO2 Extraction (SCFE) system designed to extract high-value compounds from natural raw materials such as plants, biomass, and oils using carbon dioxide in its supercritical state, ensuring a clean, solvent-free, and highly efficient process. The system is configured with one extractor and two separators, allowing operation in both batch and continuous modes, with the option to incorporate co-solvents when required. It is manufactured entirely in 304 stainless steel and equipped with a PLC-based automatic and manual control system, enabling precise monitoring and control of pressure, temperature, and flow throughout the process. The unit operates at pressures up to 5055 MPa and temperatures up to 8590C, and includes integrated safety features such as overpressure protection and safety valves, ensuring reliable and secure operation. In terms of capacity, this configuration corresponds to a large-scale industrial solution, featuring dual extraction vessels of approximately 150L each (150L 2), making it capable of processing significant volumes of raw material per batch or in continuous production. Additionally, the system incorporates electro-heating, CO2 recovery systems, high-pressure valves, and specialized sealing components, providing durability, operational efficiency, and consistency. This makes it an ideal solution for pharmaceutical, food, nutraceutical, and cosmetic applications, where high purity and process control are essential

Used OTEC DF 35 Drag Finishing Machine – 3 Workplace Holders, Siemens Control

Used- OTEC Series DF Drag Finishing Machine, Model DF 35. Consists of (3) workplace holders 8" diameter with (12) 1-1/2" inserts. driven by 0.75Kw, 660 rpm at 60Hz, 138 rpm at 50Hz, 230 volt, motor. Has octagonal stainless steel process container 42L capacity. Mounted control panel with Siemens Simatic Touch Panel *Damaged*. Mounted on aluminum frame. Serial# 35/090613.