Petro Chemical Equipment
Stock No.:
73090007Used Stainless Steel Platform for Packaging Line Scale Support
Used Stainless Steel Platform, Last used for Combination Scale. This stainless steel platform last used to mount Ishida 16 head combination scale above a Laudenberg FBM 22 horizontal form fill and seal machine. Has stairs and hand rails. Platform, Stairs and hand rail only.
MFR: Ishida
Stock No.:
73388001Used Ishida IX-GA-65100 X-Ray Inspection System – FDA Approved, Built for Food Applications
Used- Ishida IX-GA-65100 (X-Ray Inspection system. Capable of speeds from 5 - 30 meters per minute. Has a maximum conveying product weight" 25kg (over entire conveyor). Cooling method: Hermetical air cooling. FDA approved urethane belting conveyor. Operating temperature: 0 deg C - 40 deg C (with no freezing or rapid temperature shifts). Operation humidity: 30 - 85% RH (with no condensation). Xray out put: Max 350W. Inspection chamber: 7- - 1000mm (length) up to 650mm (width) up to 270mm (height). Last used in food operation. 230 volt single phase.12.0 AMP
MFR: Ishida
Stock No.:
73695001Used IWK TFS30-2 Automatic Dual Head Hot Air Plastic Tube Filler – High-Speed Tube Filling & Sealing Machine
Used IWK (IWKA) Model TFS30-2 Automatic Dual Head Hot Air Plastic Tube Filler High-Speed Tube Filling & Sealing Machine. Capable of speeds up to 180 tubes per minute (depending on tube size and application). Includes model TZ-201 Automatic tube loader, tube trimmer, print registration, jacketed and agitated hopper. Complete with onboard controls and color touchscreen operator HMI. 3/60/408V.
MFR: IWKA
Stock No.:
73632001Used R.A. Jones Autoprod FP 2x4 Cup Filler – High-Speed Inline Portion Pack Filling & Sealing System
Used- R.A. Jones (Autoprod) Automatic Inline Portion Pack Cup Filler, Model FP 2 X 4. System is currently set up for 4 to 6 oz fills at speeds of up to 240 containers per minute (depending on application). Machine includes a 12' stainless steel indexing conveyor with platens and variable speed drive. Has an 8-position container dispenser with magazine and pre-die-cut lid applicator with vacuum pick-n-place. Has an 8-head filling system with positive "no-drip" cut-off and adjustable fill nozzles. Has an 8-head digitally controlled heat sealer and foil crimping station. Has integrated controls with operator HMI. 3/60/480V.
MFR: Jones
Stock No.:
72394006Used R.A. Jones Pouch King PK4000 Horizontal Form Fill Seal Sachet Packaging Line with Film Splicer & Rotary Knife
Used- Jones Pouch King Model PK4000 Horizontal Form Fill Seal Machine Set on 3-1/2" Centers. Packaging Line Consisting of: (1) R.A. Jones Pouch King High Speed Pouch/Sachet Horizontal Form/Fill/Seal (HFFS) Machine, Model# PK4000, Serial# S-5175. (1) CTC Film Splicing / Web Handling Machine, Model# HD-ALRS-900-12M. 115V, 50/60Hz, Single Phase. (1) (1) Jones Rotary Knife Pouch Cutting Machine, With Jones Directional Transfer Machine.
MFR: Jones
Stock No.:
72699001Used Jones APM Pouch King HFFS Machine – Dual Auger, 1000 IPM, 3- or 4-Sided Seal
Used Jones APM Pouch King High Speed Horizontal Form Fill Seal with Adjustable Centers. Capable of speeds up to 1,000 Linear Inches Per Minute. Adjustable Pouch Machine Range: 3.5" - 6" (width) x 3" - 8" (height) with appropriate adjustments. Includes an Automatic Web Splicer, Capable of 3-Sided or 4-Sided, d Pouches, Has film registration, G & L PLC, dual roll unwind with Fife web tracking and Magnetek tension control. Was last running a 5-1/2" x 5-1/2"H" protein powder. Has All Fill Dual Head Auger Filler.
MFR: Jones
Stock No.:
73513001Used K&R PBI-AT 32 Case Erector & Poly Bag Inserter | 12 CPM | Tape Bottom Seal
Used K&R PBI-AT 32 Case Erector & Poly Bag Inserter | 12 CPM | Tape Bottom Seal. Machine can run at speeds of up to 12 cases a minute. Has a case size range: 12" to 16" (length); 9" to 16" (width); 6" to 18" (depth). Was originally set up for a case size of 15" long by 11" wide by 15.5" inches tall. Has a maximum poly bag web film width of 29". Tape bottom seal. Includes K&R Decuffer and Top-Serter. Has Allen Bradley SLC 5/04 PLC controls. Requires 80 psi clean dry air, 40 cfm. 20 amps. 3/60/460V.
MFR: K & R Equipment
Stock No.:
72698002Used IMA Nova 7460(A300) Bulk Bottle Unscrambler with Integrated Bottle Cleaner – 240 CPM
Used- IMA Nova Model 7460(A300) Bulk Bottle Unscrambler With Integrated Bottle Cleaner. Capable of speeds up to 240 containers per minute. Bottle size range: 1" - 4" or 25mm - 100mm (diameter) x 2" - 7" or 50mm - 180mm (height). Allen Bradley Micrologix 1100 PLC. Includes bottle elevator, sorter and ionized air cleaner. 1/60/220 Volt, 20 amp.
MFR: Kalish
Stock No.:
73485001Used Kalix Dupuy Automatic Tube Filler – Model KX100 | 80–100 Tubes/Min | No-Drip Fill | Pharma-Ready
Used Kalix Dupuy Automatic Tube Filler Model KX100 | 80100 Tubes/Min | No-Drip Fill.. Capable of speeds up to 80-100 tpm. Has a tube size range of: diameter 13.5mm - 50mm; length 60mm - 220mm. Fill volume range (with changeparts): 3cc - 350cc. Equipped with Kalix "Floor Feeder" automatic tube loader, piston fill with bottom up fill with upgraded "No-Drip" nozzles, hot jaw style heated sealer with water quench, chiller and trim station. Last running 2ml tubes and 0.9 and 18ml liquid. 3/60/220V.
MFR: Kalix
Stock No.:
70474010Pre-Owned Kalix KX60 Automatic Tube Filling Machine – 120ml Piston
Used- Kalix Model KX60 Metal Tube Filler and Sealer. Capable of speeds up to 60 tubes per minute (depending on tube size). Has a 120 ml piston, 16 station turret with 22mm diam holder. Has stainless steel agitated hopper. Manual loading of tubes. 1HP. 3/60/220V.
MFR: Kalix
Stock No.:
70171003Used Kaps-All AU-6 Automatic Bottle Unscrambler – High-Speed Plastic Container Orientation System (Up to 300 BPM)
Used- Kaps-All Model AU-6 Automatic Plastic Bottle Unscrambler. Capable of speeds up to 300 per minute, depending on size and shape of container. Container size range: 1/16oz to 32oz capable of orienting round, square, rectangular, oval, tapered and f-style containers with proper change parts. Control panel has supply hopper, carrier belt, feeder discharge, and rotary wiper with feeder speed control dials. Approximate 48" diameter pre-feeder bowl, and self-contained cap elevator/hopper with approx. 18" wide belt and 3" high cleats. 1/60/110 Volt.
MFR: Kapsall
Stock No.:
73102009Used KapsAll VOL-32-8 Inline Piston Filler – 5-Head, 36oz Pistons
Used- KapsAll Model VOL-32-8 Inline Piston Filler. (5) head unit with 36oz pistons, 3/4" dia nozzles, 6"W x 12'L conveyor with plastic belting. Variable speed controls, left to right operation. Allen Bradley MicroLogix PLC, operator interface touch screen controls. Elec: 1/60/115V. Air requirements: 80-90psi, 3-5 SCFM.
MFR: Kapsall